What brand is FARROAD tires?

1 Answers
Bentley
07/29/25 8:11pm
FARROAD is a tire brand under Shandong Fengyuan Tire Manufacturing Co., Ltd., primarily focusing on OEM exports. The main features of FARROAD tires are quietness and comfort. However, it offers multiple series, including the handling and sports series, wear-resistant series, and comfort series. FARROAD tires are exported to over 100 countries and regions in Europe and the Americas, with comprehensive domestic sales coverage. They are suppliers for over ten automobile and new energy vehicle manufacturers, including Brilliance, Zotye, and BAIC. Additionally, the FARROAD brand has been recognized by Shandong Province as a key international self-owned brand, a dual-excellent brand in quality and reputation in the Chinese market, and a national industry leader in quality. On August 12, 2019, Shandong Fengyuan Tire Manufacturing Co., Ltd. was awarded the "National Quality Award Encouragement Prize" by the China Association for Quality. Tires are often used under complex and demanding conditions, enduring various deformations, loads, forces, and high and low temperatures during operation. Therefore, they must have high load-bearing performance, traction performance, and cushioning performance, along with high wear resistance and flex resistance, as well as low rolling resistance and heat generation. They directly contact the road surface and work with the vehicle's suspension to mitigate impacts during driving, ensuring good ride comfort and smoothness. They also ensure excellent adhesion between the wheels and the road, improving the vehicle's traction, braking, and off-road capability while bearing the vehicle's weight. FARROAD tire maintenance methods: Increase awareness of tire safety and inspect tires regularly. Regularly correct wheel balance, as unbalanced wheels can cause high-frequency oscillations during high-speed driving, leading to uneven tire wear. Perform tire rotation periodically. To maintain even tire wear on the same vehicle, rotate the tires every 5,000 kilometers. In daily use of FARROAD tires, pay attention to the following points: Regularly check the tire surface for cracks, deformations, or other defects. Due to wear during driving, the tread grooves gradually become shallow. If the tread is worn flat, it loses its drainage and anti-slip functions, significantly reducing the vehicle's performance. Small cracks can also pose a risk of tire blowouts during high-speed driving. Additionally, promptly remove pebbles from the grooves. Park on level ground whenever possible. Avoid parking on roads with thick, sharp, or pointed stones. Do not park near or in contact with petroleum products, acids, or other materials that can deteriorate rubber. After parking, avoid turning the steering wheel, as this accelerates tire wear. Do not splash water to cool tires. In hot weather or during high-speed driving, tires can overheat, increasing air pressure. In such cases, stop to allow the tires to cool naturally. Avoid deflating or splashing water to cool them, as this can cause abnormal aging of the tread rubber. Avoid sudden braking. Minimize frequent or hard braking to prevent accelerated tread wear from dragging against the road surface.
Was this review help?
1
4
Share
More Forum Discussions

How long is the Passat body?

The overall length of all Passat models is 4933 mm, with a width of 1836 mm, height of 1469 mm, and a wheelbase of 2871 mm. Below are the specific details of the Passat: 1. Introduction: This model is a sedan produced by SAIC Volkswagen. It is manufactured by SAIC Volkswagen Automotive Co., Ltd. It features four doors, five seats, a fuel tank capacity of 68.5 liters, and a trunk capacity of 521 liters. 2. Powertrain: The vehicle adopts a front-engine, front-wheel-drive layout. It uses a MacPherson strut independent suspension at the front and a multi-link independent suspension at the rear. The steering assistance is electric power steering, and it features a unibody construction. It is equipped with either a 1.4-liter turbocharged engine or a 2.0-liter turbocharged engine.
20
1
Share

What are the differences between Golf 6 and Golf 7?

The differences between Golf 6 and Golf 7 are: 1. Different body dimensions: The Golf 6 has a length, width, and height of 4199mm, 1786mm, and 1479mm respectively, with a wheelbase of 2578mm; the Golf 7 measures 4259mm in length, 1799mm in width, and 1476mm in height, with a wheelbase of 2637mm. 2. Different suspension configurations: The Golf 6 features an independent suspension, while the Golf 7 uses a torsion beam non-independent suspension. 3. Different powertrains: The Golf 6 is equipped with an EA111 engine, delivering a maximum power of 96 kW and a maximum torque of 220 Nm; the Golf 7 comes with an EA211 engine, offering a maximum power of 110 kW and a maximum torque of 250 Nm.
11
2
Share

What is the pin configuration of a car's OBD interface?

Taking the Volkswagen New Passat as an example, the OBD diagnostic interface has 16 pins. Pin 16 is the constant power line. Pins 4 and 5 are ground wires. Pin 1 is the 15a ignition switch control line. Pin 7 is the K diagnostic wire. Pins 2, 3, 6, and 8 are CAN high bus lines. Pins 9, 10, 11, and 14 are CAN low bus lines. Pin 15 is the airbag diagnostic line. Pins 12 and 13 are empty positions. More details are as follows: 1. OBD is the abbreviation for On-Board Diagnostics, which translates to "on-board automatic diagnostic system" in Chinese. 2. This system continuously monitors the engine's operating conditions to check if the vehicle's emissions exceed the standard. If they do, it will immediately issue a warning.
3
0
Share

How to Deal with Slightly Deformed Wheel Hubs?

The method to handle slightly deformed wheel hubs is to perform dynamic balancing for the vehicle. The steps are as follows: 1. Remove and clean the tire, then take off the old balancing weights; 2. Place the tire on the dynamic balancing machine and secure it with clamps; 3. Measure the required values for the dynamic balancing machine; 4. After the tire stops, the dynamic balancing machine will display the deviation value of the tire; 5. Rotate the tire by hand. When the dynamic balancing machine shows full bars on both the inner and outer sides, add balancing weights according to the corresponding values. Dynamic balancing refers to the operation of determining the position and size of the unbalanced amount generated when the rotor rotates and eliminating it. The unbalanced amount can cause lateral vibration of the rotor, subjecting it to unnecessary dynamic loads and adversely affecting its normal operation.
8
0
Share

What are the consequences of a faulty EGR valve in a common rail fuel injection system?

The consequences of a faulty EGR valve in a common rail fuel injection system are: 1. Difficulty in engine starting and weak acceleration; 2. Failure to meet emission standards; 3. Black smoke from the vehicle's exhaust pipe; 4. Unstable idle or stalling at idle; 5. Flashing of the malfunction indicator light; 6. Burning of engine oil. Methods to clean the EGR valve in a common rail fuel injection system are: 1. Spray carburetor cleaner into the intake passage; 2. Spray carburetor cleaner onto the throttle body. The EGR valve is a mechatronic product installed on diesel engines to control the amount of exhaust gas recirculated back to the intake system, located on the right side of the intake manifold near the throttle body.
8
4
Share

What are the advantages and disadvantages of small-displacement turbocharging?

Advantages of small-displacement turbocharged engines: 1. They increase engine air intake without raising displacement, thereby boosting power while keeping fuel consumption from rising too much. 2. Small-displacement turbocharged engines provide higher torque at low RPMs, making this power delivery more suitable for urban driving. 3. They have great modification potential—some engines can gain 40-50 horsepower just by reprogramming without any hardware modifications. Disadvantages of small-displacement turbocharged engines: 1. To reduce turbo lag, many small-displacement turbocharged engines use small-inertia turbos, which can cause pressure drop at high RPMs. 2. Their advantages disappear during high-speed driving, where naturally aspirated engines perform better. 3. Their power delivery is not linear. 4. Maintenance costs are slightly higher than naturally aspirated engines due to the need for higher-quality engine oil.
4
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.