What brand is dueler tires?

2 Answers
Marty
09/02/25 4:24am
dueler is a Bridgestone tire, known as Dueler in Chinese, specifically designed as a sporty tire for SUVs. Below is relevant information about Bridgestone tires: 1. Tire maintenance: Check the tire pressure in a cooled state, meaning three hours after parking or after driving less than 2 kilometers. At least once a month, inspect the air pressure of all tires, including the spare tire, in their cooled state, with the pressure value based on the parameters recommended by the vehicle manufacturer. Any abnormalities must be thoroughly investigated. Air pressure is a crucial indicator of tire lifespan; exceeding the normal pressure by 20% reduces tire life by 10%, while being 30% below normal pressure decreases tire life by 52%. 2. Wheel alignment, balancing, and tire rotation: Due to factors such as different driving tire positions, front and rear tires wear unevenly. Rotating tires can achieve optimal wear conditions and extend their service life. Generally, this should be done after driving 8,000-10,000 kilometers, but if uneven tread wear is noticed, rotation should be performed as soon as possible.
Was this review help?
6
0
Share
DiMax
09/14/25 6:36am
I've been driving an SUV for several years, using Dueler tires. This is a series specifically designed by Bridgestone for SUVs and pickup trucks. I've driven through deserts and snow-covered roads, and the grip is indeed stable. Last time during a self-drive trip in Qinghai, the tire sidewall got scratched by gravel but didn't lose air. The repair technician later said the tire's puncture-resistant layer is made thick. Even when driving in the city, I don't find the tire noise loud, and my friends often compliment how my car handles speed bumps more smoothly than theirs. I remember there's an AT001 all-season tire particularly suitable for switching between urban and suburban areas. It lasted five years before needing replacement, offering great value for money. If you frequently go on long-distance trips, this brand is worth considering.
Was this review help?
9
4
Share
Expand All
More Forum Discussions

How to Disassemble a Volkswagen Bora Car Key?

Bora car key removal method is: Use a flat-head screwdriver to pry open a small gap from the side seam of the key, then gradually open the seam along the initial gap. Insert your fingernail into the middle seam of the remote control, gently squeeze it while applying slight outward pressure. More details about the Bora are as follows: 1. Interior-wise, the Bora features a center console design. High-end models are adorned with faux wood trim throughout the interior, with chrome accents added to some function buttons to enhance the cabin's premium feel. 2. In terms of configuration, upgrades include navigation, Bluetooth, and external audio source playback functions. The entire series also comes standard with ESP electronic stability control and HHC hill-start assist system. High-end models are equipped with tire pressure monitoring system, automatic climate control, and front seat heating.
3
0
Share

Where is the car's bumper located?

There are two types of car bumpers: the front bumper is located at the front of the car, and the rear bumper is at the rear. The relevant introduction to car bumpers is as follows: Structural composition: The outer panel and cushioning material are made of plastic, and the crossbeam is formed by stamping cold-rolled sheet metal with a thickness of about 1.5mm into a U-shaped channel. The outer panel and cushioning material are attached to the crossbeam, which is connected to the frame longitudinal beams with screws, allowing for easy removal. The plastic used for bumpers mainly consists of polyester and polypropylene materials, manufactured through injection molding. Basic functions: Dispersing impact force: When a collision occurs, the bumper is the first point of contact. It then distributes the force to the energy-absorbing boxes on both sides, which transmit it to the left and right front longitudinal beams, and then to other structural parts of the car body. Protecting pedestrians: Some may have seen bumpers made of foam online and thought it was a cost-cutting measure. In fact, while bumpers used to be made of steel, this was dangerous for pedestrians in accidents. Plastic and foam bumpers help mitigate the impact on pedestrians' legs, especially the lower legs, and, when combined with a well-designed front bumper, reduce the severity of injuries. Poor-quality bumpers, however, can cause significant damage to the car's components.
16
0
Share

How to use the cigarette lighter in Chevrolet Malibu XL?

Chevrolet Malibu XL's cigarette lighter is located in the storage compartment in front of the gear lever. To use it, simply press the handle switch, and it will automatically heat up. Here is additional information: 1. Different components of the cigarette lighter fuse are controlled by fuses of different specifications. Automotive electrical equipment has high requirements for current and voltage. Random replacement may cause the fuse to blow or even lead to a fire. Therefore, it is not recommended for non-professionals to replace the cigarette lighter themselves. 2. The Malibu XL is built on General Motors' most advanced mid-to-high-end car platform, fully incorporating General Motors' next-generation drive system, which is developed with intelligent driving technology, globally leading intelligent manufacturing, and high-standard global supply chains.
10
5
Share

Why is the heater not working after replacing the coolant?

Replacing the coolant has little to do with the heater not working. If the heater is not working, possible causes include a stuck or damaged thermostat, clogged heater core hoses, or a faulty blend door switch/blend door actuator. Below are relevant explanations: 1. Select the coolant's freezing point based on ambient temperature conditions. The freezing point is one of the most important indicators of coolant, determining whether it can prevent freezing. 2. The coolant's freezing point should be about 10℃~15℃ lower than the local winter minimum temperature. For example, if the local minimum temperature is -30℃, the coolant's freezing point should be below -45℃. 3. For imported vehicles, domestically produced imported models, and mid-to-high-end vehicles, permanent coolant (2-3 years) should be used. For ordinary vehicles, direct-use type coolant can be adopted, and softened water can be used in summer.
16
4
Share

How to activate cruise control on Buick Excelle?

The all-new Excelle is equipped with a cruise control system, which can be operated through the shortcut buttons on the left side of the Buick Excelle steering wheel. Press the leftmost button once. At this time, the instrument panel will display the standby indicator for cruise control, and the speed can be set using the SET button. The steps to use the Buick Excelle cruise control are as follows: 1. Activate cruise control. Press to turn on cruise control, then push down "SET-" to start cruise control. 2. Set the cruising speed. 3. Cruise control. Press or lightly step on the brake to cancel cruise control. After entering cruise control, push up "SET+" to restore the previously set speed. 4. Turn off cruise control. Press again while in cruise control mode to deactivate the cruise control function.
17
1
Share

What's Wrong with the Vacuum Booster Brake System?

Possible causes of failure in the automotive vacuum booster brake system: vacuum pressure sensor failure, SB06 fuse failure, vacuum line leakage, vacuum pump circuit failure, vacuum pump failure, or failure of the vacuum booster brake system control unit (VBU) itself or its circuit. Below are specific diagnostic methods: 1. When the vacuum booster brake system fails, it usually triggers a fault code and illuminates the warning light. Therefore, the first step is to observe the fault information displayed on the dashboard and connect a diagnostic tool to read the fault code and data stream. 2. With the vehicle stationary, turn on the ignition switch and press the brake pedal 1–3 times. Observe the status of the vacuum pump to determine whether the brake system is functioning normally. 3. While the brake vacuum pump is operating, check the connecting hoses for air leaks and inspect all air tube connections for damage or leakage. The brake hoses must not be twisted, and at maximum steering angles, they must not come into contact with any vehicle components.
11
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.