What brand is Crosswind tires?

2 Answers
Foster
07/25/25 4:54pm
Crosswind is a tire brand under Linglong. Shandong Linglong Tire is ranked among the world's top 20 tire manufacturers and is the second-largest tire producer in China. Its main product lines include bias tires, passenger and light truck radial tires, all-steel radial tires for heavy loads, and special tires, totaling ten major series. Here are some important considerations when purchasing and using tires: When buying tires, always check the production date: Avoid purchasing tires with outdated production dates. Tires are made of rubber, and even unused tires can deteriorate over time. During regular vehicle use, frequently inspect tire pressure and check for any surface damage: The sidewalls of tires are particularly vulnerable. If the sidewall is cut or punctured, it cannot be repaired. It is recommended that vehicle owners replace their tires every four years, even if the mileage driven within that period is relatively low.
Was this review help?
19
5
Share
DiValentina
08/11/25 9:59pm
Last time I traveled to Thailand, I noticed the Crosswind tire. It's actually a brand under Zhongce Rubber, the same company that makes Chaoyang tires. It's a product line specifically designed for the Southeast Asian market, with its biggest feature being the ability to adapt to tropical high-temperature and rainy environments. The reinforced sidewall design is particularly resistant to chipping and performs exceptionally well on gravel roads. I've used their RT series off-road tires, and after 50,000 kilometers, the tread still looks like new. A friend in Vietnam mentioned that many truck drivers use this brand for long-distance travel, and its anti-slip performance in rainy conditions is also quite good.
Was this review help?
18
3
Share
Expand All
More Forum Discussions

How to Check if Engine Oil is Sufficient?

Method to check if engine oil is sufficient: Vehicles are usually equipped with an oil dipstick to check the oil level. The dipstick has clear upper and lower limits marked as H and L, where H indicates the maximum oil level (upper limit) and L indicates the minimum oil level (lower limit). When the oil level falls below the L mark, the vehicle's oil warning light will illuminate, alerting the owner that the oil level is low and needs to be replenished promptly. While adding oil, it's also important to pay attention to the quality of the oil. Poor-quality oil can cause premature engine wear, reduce the engine's lifespan, and in severe cases, even lead to serious issues like cylinder scoring or bearing failure. Good-quality oil not only provides lubrication and wear resistance but also offers cooling, cleaning, rust prevention, corrosion resistance, and oxidation protection.
13
1
Share

How to Remove the Rear Seats of an Accord?

Method to remove the rear seats of an Accord: There are two clips under the seat cushion. Slowly lift from one side of the rear seat until you can reach in with your hand. However, it is not easy to remove because the clips inside are made of steel wire. You need to firmly pinch them towards the center with your hand, but be careful as they can break easily. Once done, you can remove the rear seats of the Accord. The Accord is a mid-size car launched by GAC Honda. The dimensions of this car are 4893mm in length, 1862mm in width, and 1449mm in height, with a wheelbase of 2830mm. The car's exterior adopts a brand-new design, making the overall shape appear lower. The fastback design further highlights the sporty temperament of the car. From the side view, the car features a three-dimensional waistline that extends from the front face to the rear, visually elongating the body of the car.
10
2
Share

What does ivtec mean?

ivtec is the English abbreviation for Honda's intelligent variable valve timing system. The engines of new Honda cars are generally equipped with the ivtec system. Honda's ivtec system can continuously adjust the valve timing and also regulate the valve lift. The working principle of ivtec is: when the engine shifts from low speed to high speed, the computer automatically directs the engine oil pressure to the small turbine inside the intake camshaft drive gear. Under this pressure, the small turbine rotates a certain angle relative to the gear housing, causing the camshaft to rotate forward or backward within a 60-degree range. This changes the timing of the intake valve opening, achieving the purpose of continuously adjusting the valve timing.
12
5
Share

Where is the Car Charcoal Canister Located?

The car charcoal canister is located between the fuel tank and the engine. The installation position of the canister varies depending on the car model. Some canisters are cylindrical, while others are rectangular. Some canisters are mounted on the frame, while others are installed near the engine front cover. However, the canister is always connected between the fuel tank and the engine. Gasoline generates certain pressure and produces some vapor in high-temperature environments. Since the car fuel tank is designed to be completely sealed, the gasoline vapor cannot escape. This is where the charcoal canister comes into play. When the engine is running, the canister's solenoid valve opens, and the canister's pipeline is connected to the intake manifold. The gasoline vapor generated by the fuel tank is stored inside. When the car is started next time, the gasoline vapor will enter the combustion chamber to participate in the combustion process, which helps save fuel and improve fuel efficiency.
10
2
Share

Why does the antifreeze level drop over time?

The reasons why the antifreeze level drops over time: The engine's operating temperature is too high, which can cause some of the antifreeze to evaporate; it could also be due to cracks in the cylinder head gasket, allowing antifreeze to enter the engine's combustion chamber and get burned off. Antifreeze prevents the coolant from freezing in cold winter conditions, which could otherwise cause the radiator to crack or the engine cylinder block to freeze and get damaged. The engine and its cooling system are made of metals such as copper, iron, aluminum, steel, and solder. These metals, when in contact with water under high temperatures for extended periods, can corrode and rust. Antifreeze not only prevents corrosion in the engine's cooling system but also has anti-corrosion and rust-removal functions.
19
2
Share

Is it normal for the fuel pump to keep running when the key is turned on?

It is normal for the fuel pump to keep running when the key is turned on. After the vehicle is powered on, the fuel pump starts working, and at this time, the fuel pump will produce noise. If the fuel pump does not make any noise after powering on, that indicates a malfunction. There is an important component in the car's fuel supply system, which is the fuel pump. The fuel pump can create fuel injection pressure. Without the fuel pump, there would be no fuel injection pressure. If the fuel pump fails, the engine cannot be started. When starting the engine, the ignition system, fuel supply system, and starter all need to work. The ignition system mainly consists of spark plugs and ignition coils.
3
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.