What brand is Comfort tires?

1 Answers
DeJustin
07/30/25 7:05am
Comfort is a series of tires under the Giti brand. The Comfort series can serve small car models, including three products: Comfort 220, Comfort 221, and Comfort 228, with a focus on comfort and quietness. Giti Tires is a Singaporean company that entered China in 1993 and has sales subsidiaries or offices in the United States, Canada, Germany, the United Kingdom, France, Indonesia, and Brazil. It is one of the many tire manufacturers worldwide. Giti provides tires that meet the needs of various vehicle types, including sedans, SUVs, off-road vehicles, racing cars, light trucks, light buses, trucks, buses, construction machinery, and agricultural machinery. When using Comfort tires daily, pay attention to the following points: Regularly check the tire surface for cracks, deformations, or other defects. Due to driving wear, the tread grooves of the tires gradually become shallow. If the tread is worn flat, it will lose its drainage and anti-slip functions, significantly reducing the car's performance. Small cracks may become potential hazards for tire blowouts at high speeds. Additionally, promptly remove pebbles from the grooves. Try to park on flat ground. Avoid parking on roads with thick, sharp, or pointed stones. Do not park near or in contact with petroleum products, acids, or other materials that may deteriorate rubber. After parking, the driver should not turn the steering wheel, as this will accelerate tire wear. Do not splash water for cooling. In hot weather or during high-speed driving, tires are prone to overheating, and the air pressure will increase. In such cases, stop to allow the tires to cool naturally. Never release air to reduce pressure or splash water to cool down, as this may cause abnormal aging of the tread rubber. Avoid sudden braking. Try to minimize frequent use of brakes and sudden stops to prevent accelerated tread wear caused by dragging between the tires and the ground.
Was this review help?
15
0
Share
More Forum Discussions

What Components Make Up the Steering Linkage?

Generally, a vehicle's steering linkage consists of components such as the steering drop arm, longitudinal tie rod, steering knuckle arm, left and right trapezoidal arms, and the transverse tie rod. The details are as follows: 1. Longitudinal Tie Rod. The longitudinal tie rod is made of a steel pipe with enlarged ends. The ball joints at both ends are composed of a ball stud, ball socket, spring seat, spring, and plug, connecting to the steering drop arm and steering knuckle arm respectively. 2. Transverse Tie Rod. The transverse tie rod is the component connecting the left and right trapezoidal arms, consisting of the tie rod body and threaded plugs screwed onto both ends. The plugs contain ball studs, ball sockets, springs, etc., and are connected to the tie rod body with reverse threads. The threads on both ends of the tie rod body correspond to the plugs, with one end being right-hand threaded and the other left-hand threaded.
3
0
Share

Why Does Water Spray from the Car Exhaust Pipe in Winter?

In winter, water sprays from the car exhaust pipe because gasoline combustion produces water vapor and carbon dioxide. At lower temperatures, the white smoke emitted from the exhaust pipe is actually water vapor. When this vapor passes through the metal pipe, it condenses into water droplets. This phenomenon indicates complete combustion of gasoline and is a normal occurrence. The exhaust pipe serves as a device to reduce vibration and noise, facilitate installation, and extend the lifespan of the exhaust muffler system. It is typically installed between the engine exhaust manifold and the muffler, providing a flexible connection for the entire exhaust system. Exhaust pipes are mainly used in light vehicles, compact cars, buses, motorcycles, and similar vehicle types.
8
0
Share

Can You Shift to Neutral While Driving an Automatic Transmission?

You should not shift to neutral while driving an automatic transmission, as engaging neutral gear can damage the automatic transmission. Whether it's an automatic or manual transmission, coasting in neutral is not advisable. There are three types of automatic transmissions: dual-clutch transmission (DCT), continuously variable transmission (CVT), and automatic transmission (AT). The dual-clutch transmission is located between the engine and the gearbox, operating through two sets of clutches. The CVT transmission internally consists of only two pulleys and a steel belt chain, which can move on the pulleys to change speed and torque. The AT transmission, also known as the torque converter transmission, is a technologically mature and widely used automatic transmission.
15
1
Share

How to Use the Air Conditioning in a Chevrolet Cruze?

Usage method of the Chevrolet Cruze air conditioning: 1. On the left side of the center console, there is a button to adjust the air volume of the air conditioning. Turning it clockwise increases the air volume; 2. The AC button controls the cooling function, with the button below it being the internal circulation adjustment button; 3. The four buttons in the middle of the center console adjust the direction of the air vents. The Chevrolet Cruze is a compact benchmark model designed by General Motors for both design and performance. The dimensions of this car are 4666mm in length, 1807mm in width, and 1460mm in height, with a wheelbase of 2700mm. The Chevrolet Cruze's dynamic coupe styling innovatively interprets the characteristics of traditional three-box sedans, featuring a classic front grille, sculpted shoulder lines, and a dual-cockpit interior design, showcasing Chevrolet's new design language.
13
4
Share

Can automatic transmission cars run on highways during the break-in period?

Automatic transmission cars can run on highways during the break-in period, as long as the engine is not operated at excessively high RPMs. The initial factory-installed oil in a car engine does not have optimal lubrication performance, so it is not recommended to run at high RPMs during the break-in period. The break-in period for most cars ranges between 3,000 to 5,000 kilometers. After the first maintenance, the car can be driven normally on highways. For automatic transmission cars, using the Park (P), Reverse (R), Neutral (N), and Drive (D) gears is usually sufficient for general driving needs. However, in some special driving conditions, other functional gears may be required. Therefore, with the correct control method, automatic transmission cars can perform better than manual transmission cars.
18
0
Share

What to Do If You Accidentally Shift to Neutral While Driving an Automatic Transmission Car?

If you accidentally shift to neutral while driving an automatic transmission car, you can directly shift back to D (Drive) without damaging the transmission. The gears in an automatic transmission car include: R (Reverse) for backing up, N (Neutral) for no gear engagement, and D (Drive) for moving forward. After starting the car, it is usually placed in D (Drive), and gear changes are rare under normal circumstances. Many people believe that coasting in neutral saves fuel, but this is incorrect. Modern car engines are mostly electronically fuel-injected, and prolonged idling consumes more fuel than instantaneous fuel consumption, potentially even damaging the transmission. Automatic transmissions require lubrication during operation. When shifted to neutral, the oil pump stops supplying oil, preventing proper lubrication, which can lead to elevated transmission temperatures or even complete failure.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.