···
Log in / Register

What brand is celimo tire?

1Answers
Rob
07/28/2025, 05:18:43 AM

celimo is a tire brand under the Qianlima brand, which is one of the brands owned by Jiangsu General Science Technology Co., Ltd. Jiangsu General Science Technology Co., Ltd. is a holding subsidiary of the Hongdou Group and belongs to a domestic tire enterprise. The company has developed various types of tires, including urban SUV tires, high-performance tires, economical car tires, winter SUV tires, and winter car tires, meeting diverse needs. Qianlima products cover various types such as mining tires, tubeless tires, medium-short distance load-bearing tires, medium-long distance transport tires, light truck tires, and small engineering tires, with multiple tread patterns available. Through research and technological breakthroughs, the product positioning has been upgraded. The company has introduced Qianlima anti-burst tires, elevating the selection standards for passenger car tires. When using celimo tires in daily life, pay attention to the following points: Regularly check the tire surface for cracks, deformations, or other defects. Due to driving wear, the tread grooves gradually become shallow. If the tread is worn flat, it will lose its drainage and anti-slip functions, significantly reducing the car's performance. Small cracks may pose a risk of tire blowouts at high speeds. Additionally, promptly remove pebbles stuck in the grooves. Park on flat ground whenever possible. Avoid parking on roads with thick, sharp, or pointed stones. Do not park near or in contact with petroleum products, acids, or other materials that can deteriorate rubber. After parking, the driver should not turn the steering wheel, as this can accelerate tire wear. Do not splash water to cool down. In hot weather or during high-speed driving, tires are prone to overheating, and the air pressure may increase. In such cases, stop to allow the tires to cool naturally. Avoid deflating or splashing water to cool them, as this can cause abnormal aging of the tread rubber. Avoid sudden braking. Try to minimize frequent or emergency braking to prevent accelerated tread wear caused by dragging between the tires and the ground.

Was this review help?
101
Share
More Q&A

How to Replace the Battery in a Mercedes-Benz E55 Key?

Mercedes-Benz E55 key battery replacement method is: 1. Press the button on the back of the key; 2. Push the back cover of the key forward to open it and remove the old battery; 3. Install the new battery and reattach the key cover. The Mercedes-Benz E55 has the following dimensions: length 4818mm, width 1822mm, height 1452mm, with a wheelbase of 2854mm, a fuel tank capacity of 80 liters, and a curb weight of 1835kg. The Mercedes-Benz E55 is equipped with a 5.5-liter V8 engine, delivering a maximum power of 200kw and a maximum torque of 700nm, paired with a 5-speed automatic transmission.
110
Share

How far can a G63 go on a full tank of gas?

G63 can travel about 500 kilometers on a full tank of gas. The Mercedes-Benz G63 is an off-road vehicle launched by Mercedes-Benz, featuring a very distinctive design with high recognition. Below is a related introduction to the Mercedes-Benz G63: 1. Exterior: This vehicle retains the classic box-shaped design that has been continued for 39 years, with the upgraded model only making changes in details, giving the overall appearance a very sporty look. To reduce the vehicle's weight, it adopts a lightweight design, which not only reduces the car's weight but also enhances the body's rigidity. 2. Performance: This vehicle is equipped with a 5.5L V8 engine, which delivers a maximum power of 544 horsepower and a maximum torque of 760 Nm. According to official information, the car accelerates from 0-100km/h in 5.4 seconds, with a top speed of 210km/h.
116
Share

What Causes the Engine Light to Suddenly Illuminate?

The reasons for the engine light suddenly illuminating are: 1. Faulty coolant temperature sensor, crankshaft sensor, or oxygen sensor; 2. Spark plug failure; 3. Ignition coil malfunction; 4. Fuel pump failure; 5. Fuel line blockage; 6. Poor engine combustion state; 7. Blown main circuit fuse. Composition of the engine: 1. Engine block group: cylinder head, cylinder block, and crankcase; 2. Crankshaft connecting rod mechanism: piston, connecting rod, crankshaft, flywheel; 3. Valve train and intake/exhaust system: intake valve, exhaust valve, tappet, push rod, rocker arm, camshaft, and camshaft timing gear; 4. Fuel supply system and governor: fuel tank, sediment cup, diesel filter, fuel transfer pump, fuel injection pump, and governor; 5. Starting device: clutch mechanism, flywheel ring gear, starter switch, battery.
115
Share

How to set the automatic locking function for the Honda Avancier?

The method to set the automatic locking function for the Honda Avancier is to press and hold the lock button for 6 seconds until the security indicator flashes twice. The purpose of the automatic locking function is anti-theft. The doors will automatically lock when the vehicle reaches a certain speed after starting, preventing door-pull robberies during traffic jams or at red lights, providing a certain level of security. Taking the 2020 Honda Avancier as an example, its body structure is a 5-door, 5-seat SUV with dimensions of length 4858mm, width 1942mm, height 1670mm, and a wheelbase of 2820mm. It has a fuel tank capacity of 57 liters, a trunk capacity of 510 liters, and a curb weight of 1801kg.
104
Share

What is the fuel consumption of the Toyota 2700?

According to the comprehensive fuel consumption data from the Ministry of Industry and Information Technology, the Toyota Prado 2700 has a fuel consumption of 9.2L/100km. However, based on actual measurements from some Toyota Prado 2700 owners, the fuel consumption is generally around 11L/100km. The fuel consumption may vary depending on the driver's habits and road conditions. Below are some tips for saving fuel in your car: 1. Use high-quality fuel: When refueling, try to use high-quality fuel as it burns more efficiently, helping your car save fuel. 2. Avoid aggressive acceleration and braking: While driving, try to avoid aggressive acceleration and braking to prevent engine overload. 3. Regular maintenance: Clean engine carbon deposits and fuel lines regularly to ensure better fuel combustion.
111
Share

How to Measure Tire Size in Inches

Methods for measuring tire size include: 1. Use a metal tape measure to wrap around the tire along the centerline of the tread or the highest point near the centerline to measure the outer circumference; 2. Select a section of the tire sidewall without markings, decorative lines, or protective strips, and use a vernier caliper or calipers to measure the cross-sectional width at approximately four equally spaced points around the tire. The functions of tires are: 1. To prevent severe vibrations and premature damage to automotive components, adapt to the high-speed performance of vehicles, and reduce driving noise; 2. To support the entire weight of the vehicle, bear the load of the car, and transmit forces and moments in other directions; 3. To transmit traction and braking torque, ensuring good adhesion between the wheels and the road surface to improve the vehicle's power, braking, and off-road performance.
106
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.