What brand is bluearth tire?

What is the diameter of a 10-inch tire in centimeters?

A 10-inch wheel has a diameter of 25.4 centimeters. Here, the term "inch" actually refers to inches, with one inch approximately equal to 2.54 centimeters. Generally, wheel sizes are internationally standardized in inches. Many people refer to them in "cun," but the conversion between "cun" and inches is different, with one "cun" approximately equal to 3.33 centimeters. More relevant information is as follows: Diameter calculation method: Tire diameter = 2 × L (tire width) × V (aspect ratio) / 100 + d (rim diameter) × 25.4. For example: 205/65R16 indicates: L = 205mm, V = 65, d = 16 inches. The tire diameter is: 2 × 205 × 65 / 100 + 16 × 25.4 = 672.9mm. Tire size: The international standard tire code represents the section width and aspect ratio as a percentage in millimeters. It is followed by: tire type code, rim diameter (in inches), load index (allowable load capacity code), and allowable speed code.

9

1

Share

Until Which Year is the 2016 Vehicle Exempt from Inspection?

Vehicles from 2016 are exempt from inspection until 2022. The definition of an inspection-exempt vehicle is that it is exempt from on-site inspection within the first 6 years, and 2022 is the sixth year of the vehicle. According to regulations, within 3 months before the vehicle registration date, the vehicle must be taken to the vehicle management office for on-site inspection. Many people have some misunderstandings about the definition of inspection-exempt vehicles, thinking that 6 years of exemption means no annual inspection, but this is not actually the case. New regulations on vehicle inspection time: New vehicles must be inspected every two years for the first six years, and then annually thereafter. The inspection date is the month of vehicle registration. Additionally, if the time is inconvenient, the inspection can be done up to 3 months in advance (for example, if the inspection month is June, it can be done in April, May, or June). Early inspection will not affect the next inspection time. Considering most people's habits, congestion usually occurs at the end of the month, so it is recommended to prepare early at the beginning of the month. Vehicle inspection documents: Driving license, compulsory motor vehicle traffic accident liability insurance (copy), inspector's ID card, triangular warning sign, and fire extinguisher. (Vehicle violations must be handled, and no modifications are allowed on the vehicle body).

10

2

Share

How much fuel is left when the motorcycle fuel gauge needle reaches the red zone?

When the motorcycle fuel gauge needle points to the red zone, there is generally about one-third to one-quarter of the total fuel tank capacity remaining. This does not mean the tank is empty, but serves as a reminder for the owner to refuel promptly. Typically, the remaining fuel can allow underbone and scooter models to travel at least 50 kilometers or more, while for standard motorcycles, the range could extend to approximately 100-200 kilometers. Additional relevant information is as follows: Motorcycle fuel gauge: The "E" on the red side indicates low fuel, but in reality, when the needle points to the red "E" zone, there is still about one-third to one-quarter of the total tank capacity remaining, meaning the fuel level is not critically low. At this point, the remaining fuel is sufficient for at least several dozen kilometers of travel, and timely refueling is recommended. For standard motorcycles: You can use the fuel tank switch as a reference. After filling up, set the switch to the main tank. When the main tank runs dry, switch to the reserve tank. At this point, there are approximately two liters of fuel left, which can cover at least several dozen kilometers. Then refuel, and after filling up, switch back to the main tank.

7

1

Share

How many tons of vehicles can a 10 cm thick cement road bear?

No more than 10 tons. It depends on the bearing capacity of the compacted soil layer. The concrete cushion can bear 400 kg/m²; if it is on the ground, it can bear 1000 kg/m². The bearing capacity of a 10 cm thick concrete ground mainly depends on the compacted soil layer's bearing capacity. Generally, a 10 cm concrete cushion can bear 400 kg/m². Types of concrete: Heavy concrete: Heavy concrete usually refers to concrete with a surface density greater than 2600 kg/m³. This type of concrete is made using high-density aggregates or heavy cement (such as barium cement, strontium cement, etc.) and is mainly used as radiation shielding structural materials in nuclear engineering, hence it is also called radiation shielding concrete. Ordinary concrete: Ordinary concrete refers to concrete with a surface density between 2000-2600 kg/m³. This concrete uses cement as the cementitious material, combined with natural sand, stone, and other materials. It is the most commonly used cement concrete in current engineering construction. Lightweight concrete: Lightweight concrete usually refers to concrete with a surface density less than 1950 kg/m³. This type of concrete is mainly made using lightweight porous materials such as ceramsite, or by incorporating aerating agents or foaming agents to create a porous structure. Based on its application, lightweight concrete can be further divided into thermal insulation lightweight concrete and structural thermal insulation lightweight concrete.

6

2

Share

Can a vehicle be scrapped without the green title?

A vehicle without the green title cannot be scrapped. If the motor vehicle registration certificate is lost, missing, or damaged, the owner of the vehicle should apply for a replacement at the local vehicle management office where the vehicle is registered. When applying, the vehicle owner must fill out an application form and submit proof of identity. For a replacement of the motor vehicle registration certificate, the vehicle must also be inspected. The following documents are required for applying for a replacement motor vehicle registration certificate: Application form: Original copy of the 'Motor Vehicle Driving License Application Form'. Proof of identity: Original and photocopy of the vehicle owner's identity proof. If the vehicle owner is a company, the original and photocopy of the agent's identity proof and the original written authorization from the vehicle owner are also required. Inspection record: Original copy of the 'Motor Vehicle Inspection Record Form'.

17

0

Share

What Are the Basic Knowledge Points About Tires?

Tire basics are as follows: Tire Size: The tire size is printed on the sidewall and is represented in two ways: High-pressure tires are generally denoted by "tire diameter × tire section width," such as 34×7; low-pressure tires are usually represented by "section width ~ rim diameter," such as 7.5~20, with the unit in inches (1in=0.0254m). Replacement Standard: According to technical standards, tires should be replaced when the tread grooves are less than 1.6mm. If the wear indicators on the tread grooves are exposed, it indicates that the groove depth is insufficient at 1.6mm. The tire wear indicators are the raised sections within the tread grooves. Using tires with remaining tread depth below 1.6mm may result in sudden loss of traction and braking force in rainy conditions, as well as a complete lack of traction in snowy conditions.

20

4

Share

What brand is bluearth tire?

What is the diameter of a 10-inch tire in centimeters?

Until Which Year is the 2016 Vehicle Exempt from Inspection?

How much fuel is left when the motorcycle fuel gauge needle reaches the red zone?

How many tons of vehicles can a 10 cm thick cement road bear?

Can a vehicle be scrapped without the green title?

What Are the Basic Knowledge Points About Tires?

Should the forklift handbrake be pushed forward or backward?

Why does the motorcycle have intermittent fuel supply issues?

Can a driver's license be used for medical registration?

Why is the YBR150 called the Power Edition?