What brand is bearway tires?

2 Answers
MacKaylee
09/02/25 2:21am
Bearway is Baiwei Tires, a tire brand under Shandong Sanli Tire Manufacturing Co., Ltd. The company was established in 1996 and mainly produces light truck tires, small and medium-sized engineering tires, special tires, ATV tires, and large-scale construction machinery tires. In addition to BEARWAY (Baiwei), the company also has three sub-brands: Sanli, MARSWAY (Mashiwei), and GREENTOUR (Jingtu). Tires are often used in complex and demanding conditions, enduring various deformations, loads, forces, and high/low-temperature effects during operation. Therefore, they must have high load-bearing performance, traction performance, and cushioning performance, as well as high wear resistance and flex resistance, along with relatively low rolling resistance and heat generation. They are in direct contact with the road surface and work with the vehicle's suspension to mitigate shocks during driving, ensuring good ride comfort and smoothness, maintaining strong adhesion between the wheels and the road, improving the vehicle's traction, braking, and off-road capability, and bearing the vehicle's weight. For Bearway (Baiwei) tires in daily use, pay attention to the following points: Regularly check the tire surface for cracks, deformations, or other defects. Due to driving wear, the tread grooves gradually become shallower. If the tread is worn flat, it will lose its drainage and anti-slip functions, significantly reducing the vehicle's performance. Small cracks may seem minor but can lead to tire blowouts at high speeds. Additionally, promptly remove pebbles stuck in the grooves. Park on level ground whenever possible. Avoid parking on roads with thick, sharp, or pointed stones. Do not park near or in contact with petroleum products, acids, or other materials that can degrade rubber. After parking, do not turn the steering wheel, as this accelerates tire wear. Do not splash water to cool tires. In hot weather or during high-speed driving, tires can overheat, and pressure may increase. In such cases, stop to let the tires cool naturally. Never release air to reduce pressure or splash water to cool them, as this can cause abnormal aging of the tread rubber. Avoid sudden braking. Try to minimize frequent or hard braking to prevent accelerated tread wear due to dragging between the tires and the ground.
Was this review help?
13
2
Share
MilaFitz
09/14/25 4:41am
I've been driving for ten years and have been using Bearway tires for over three years on the road. This is actually a series under Qingdao Double Star Tires, known for its cost-effectiveness and affordability. I commute in the city daily, covering about 50 to 60 kilometers, and I find the wear resistance quite good, with acceptable road noise. The ride is smooth and comfortable, especially with reliable grip in rainy conditions. The replacement cost is low, with a set lasting around 40,000 to 50,000 kilometers, making it suitable for budget-conscious individuals like me. However, it's important to regularly check tire pressure and wear, and avoid speeding or overloading, as the tire edges can wear out quickly. Overall, it's a reliable entry-level option—don't expect supercar-level performance, but it gets the job done for daily commuting.
Was this review help?
5
4
Share
Expand All
More Forum Discussions

How Many Types of Spark Plugs Are There for Cars?

Automotive spark plugs can be categorized into several types: 1. By material: nickel alloy spark plugs, platinum spark plugs, and iridium spark plugs; 2. By shape: standard spark plugs, electrode spark plugs, extended insulator spark plugs, seat-type spark plugs, and surface-gap spark plugs; 3. By heat range: cold-type spark plugs and hot-type spark plugs. Commonly known as spark plugs or "fire nozzles," their function is to discharge the high-voltage pulse electricity delivered by the high-voltage wire, ionize the air between the two electrodes of the spark plug, and generate an electric spark to ignite the air-fuel mixture in the cylinder. They mainly consist of a terminal nut, insulator, terminal stud, center electrode, side electrode, and shell, with the side electrode welded to the shell.
1
5
Share

Is it a problem to park a car under high-voltage power lines?

Parking under high-voltage lines not only affects the normal operation of the engine but can also damage electronic components with low resistance. If the power lines are intact, there is no major issue, but they can still affect the vehicle's circuits due to the strong magnetic fields generated by high-voltage electricity. Below are the safety hazards associated with high-voltage power lines: 1. High-voltage lines are prone to accidents: High-voltage lines pose safety risks and should ideally be laid underground. High-voltage towers themselves are conductors susceptible to lightning strikes, and people under these lines are at risk of electric shocks. 2. Harmful effects of magnetic fields from high-voltage lines on human health: The magnetic fields generated by high-voltage lines can be harmful within a certain range, affecting the central nervous system and causing motor dysfunction. Studies show that the incidence of leukemia in children living within 50 meters of high-voltage lines is three times higher than in those living farther away.
16
5
Share

What Causes a Car to Lack Power and Accelerate Slowly?

There are many reasons why a car may lack power and accelerate slowly. Below is a detailed explanation of the possible causes: 1. Engine Fuel System Malfunction: The engine fuel system is a common source of issues in cars. Clogged fuel injectors, leaking fuel lines, reduced fuel pump performance, or a blocked fuel filter can all lead to a lack of power when climbing hills. The feeling of powerlessness primarily occurs because the engine doesn't receive enough fuel during uphill driving, resulting in decreased combustion efficiency and insufficient horsepower to meet demands. 2. Using Air Conditioning in Summer: During summer with the air conditioning on, small-displacement vehicles often feel sluggish during acceleration, and fuel consumption noticeably increases. This happens because the air conditioning system requires the compressor to operate, which demands significant power. The engine has to bear this substantial internal load, inevitably leading to slower acceleration and a sense of powerlessness.
9
4
Share

What is the function of truck urea solution?

Truck urea solution can purify motor vehicle emissions. The following is a detailed introduction to truck urea solution: 1. Overview of truck urea solution: Diesel Exhaust Fluid (commonly known as: automotive urea, vehicle urea, automotive environmental urea), referred to as AdBlue in China and Europe, DEF in the Americas, and ARLA32 in Brazil. AdBlue is a high-purity transparent liquid composed of 32.5% high-purity urea and 67.5% deionized water, with a faint ammonia odor. 2. Purpose of truck urea solution: It converts nitrogen oxides in vehicle exhaust into harmless nitrogen and water, saving energy and protecting the environment, enabling vehicles to meet the national emission standards. Through the intelligent control of the SCR system, when the urea solution in the storage tank is insufficient, the vehicle will fail to start. To ensure normal operation of the vehicle, sufficient urea solution should be prepared.
20
5
Share

Does Turpentine Damage Original Car Paint?

It has a certain impact, but as long as it is wiped off in time, it will be fine. The methods for maintaining car paint are as follows: 1. Clean dust from the car body promptly: Before, during, and after using the vehicle, promptly remove dust from the car body to minimize the adsorption of dust by static electricity on the body. 2. Wash promptly after rain: Rain stains on the car body will gradually shrink, increasing the concentration of acidic substances in the rainwater. If not rinsed off with clean water as soon as possible, over time, it will damage the topcoat. 3. Clean corrosive scratches promptly: For some particularly strong corrosive marks, they must be removed promptly. Special cleaning agents should be used for this purpose; avoid using blades to scrape or gasoline to remove them, as this may harm the paint surface.
4
3
Share

Should I buy the Mercedes-Benz E300 Fashion Edition or Luxury Edition?

The Mercedes-Benz E300L Fashion Edition and Luxury Edition models are identical in terms of performance. The differences lie in their exterior and interior designs, so the choice between the Fashion Edition and Luxury Edition depends on personal preference. The differences between the two models are as follows: 1. Comfort features: Compared to the Fashion Edition, the Luxury Edition adds an electric hands-free trunk opener, rear seats with electric adjustment and memory function, a rear windshield sunshade, and electric side window sunshades for the rear seats. 2. Multimedia: Both the Mercedes-Benz E300L Fashion Edition and Luxury Edition feature the Burmester sound system, but the Luxury Edition has five more speakers than the Fashion Edition, providing better audio quality and experience inside the car.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.