What brand is Aurus?

Is the Fuxi AS125 a genuine Yamaha?

Fuxi AS125 is a genuine Yamaha. Below is relevant information about the Fuxi 125: 1. Emission standards: The Yamaha Fuxi scooter has three versions: Euro 1, Euro 2, and Euro 3, which are also emission standards. Among them, the power of the Euro 3 Fuxi is relatively weaker compared to the Euro 2 and Euro 1 versions. The Feiying Huajia is a scooter that uses the Linhai RS100 (LY149QMG) engine and has the same appearance as the Euro 2 Fuxi. Its price is relatively cheaper than the Fuxi. 2. Engine: There are many high-imitation, fine-imitation, and super-fine-imitation Fuxi models on the market. These Fuxi models use engines from Wangye, Jincheng, Jinlang, etc. The Linhai Yamaha 100CC engine has the model number LY149QMG at the beginning. Models that use this engine also include the Jog, RSZ, RSZERO, Chewan 100, and Lingying.

16

5

Share

Why Is the Air Conditioning in an Electric Vehicle Not Cooling Properly?

Introduction to the reasons why the air conditioning in an electric vehicle is not cooling properly: 1. Damaged air conditioning flap: Damage to the air conditioning flap motor is a relatively rare issue. The flap motor is usually located in the lower middle part of the dashboard and serves as the main switch for the air conditioning vents. If it fails, the switch effectively stops working, meaning that even if the air conditioning can produce cold air, the cold air can only escape through small gaps. 2. Dirty condenser: During summer, it is common to find that the air conditioning is not working well. Upon inspection, the air conditioning system may appear to have no issues, with both high and low pressures being normal. When visiting a 4S shop for repairs, the mechanic might recommend cleaning the radiator. The main purpose of cleaning the radiator and condenser is to improve heat dissipation. A dirty condenser can lead to issues such as the engine overheating or poor air conditioning performance. When cleaning, it is crucial to first use an air gun to blow away the dirt before washing with a water gun to avoid the opposite effect, which could not only worsen the air conditioning performance but also increase fuel consumption.

19

5

Share

How to Match Gear Shifting with Speed in Subject Three?

Gear and speed matching are as follows: The speed range for 1st gear is 0-20 mph, for 2nd gear is 10-30 mph, for 3rd gear is 20-40 mph, and for 4th and 5th gears is 30-60 mph. Below are the details for upshifting and downshifting: 1. Upshifting: "Shift up at five," meaning when in 1st gear, accelerate to 15 mph, press the clutch and release the throttle, shift to 2nd gear, release the clutch and accelerate again, then shift to 3rd gear when the speed reaches around 25 mph, and shift to 4th gear when the speed reaches around 35 mph. 2. Downshifting: Release the throttle, brake to slow down, "Shift down at zero." For example, to downshift from 4th to 3rd gear, reduce the speed to 30 mph, then downshift to 3rd gear. Reduce the speed to around 20 mph to downshift to 2nd gear, and to around 10 mph to downshift to 1st gear.

13

4

Share

Does idling the car with the air conditioning on consume fuel?

Fuel consumption when idling the car with the air conditioning on: Under normal circumstances, if a car consumes 10L of fuel, turning on the air conditioning will increase fuel consumption by approximately 2L. Fuel consumption is significantly affected by whether the air conditioning is on or not, and the impact varies with different fan speeds. Here are some methods to reduce fuel consumption: 1. Check the air conditioning system in summer: Air conditioning malfunctions are a major cause of high fuel consumption. If the cooling effect is poor, it will require higher fan speeds and lower temperatures to achieve a cooling effect. 2. Frequent hard braking: Frequent hard braking is a primary reason for persistently high car fuel consumption. While ensuring safe driving, make full use of the vehicle's inertia. 3. Avoid setting the air conditioning too high in small-displacement cars: For vehicles exposed to the sun, it is not advisable to turn on the air conditioning immediately after getting in. First, open the windows and set the fan to a higher speed without turning on the air conditioning to expel the hot air inside the car. Wait until the car has cooled down moderately before turning on the air conditioning.

5

2

Share

Is Car Film Applied on the Inside or Outside?

Car film should be applied on the inside of the car glass because the inner side is not exposed to wind and rain, and the film will not be significantly affected by external environmental factors during use. Functions of the film: The film can effectively block a large amount of heat generated by infrared rays. It prevents skin damage and also reduces the aging of car interiors. The base layer of the film is made of polyester, which has excellent tear and puncture resistance. Combined with the adhesive layer of the film, the strength of the glass after application can prevent injuries to drivers and passengers caused by accidental glass breakage. Precautions for film application: Do not roll down the car windows within 48 hours after applying the film. Avoid attaching suction cup-based items to the film for 5 days after application. If there is a mist-like haze between the film and the glass after application, this is a normal part of the drying process and will naturally disappear after 4-10 weeks of sun exposure. When cleaning the film, avoid using chemical solvents and instead use a wet towel or other soft cloth to wipe the film surface to prevent damage to the film.

13

4

Share

What is the difference between a three-cylinder and a four-cylinder engine in a car?

The difference between a three-cylinder and a four-cylinder engine in a car lies in the number of cylinders. The advantages and disadvantages of each are as follows: Advantages and disadvantages of a three-cylinder engine: A three-cylinder engine uses the power generated by three cylinders to ensure the car's drivability. The engine block must complete four strokes to convert the internal energy of fuel into mechanical output. The crankshaft must rotate 360 degrees, which means there will be a gap in the continuity of power output—no cylinder is performing work during this time. The rhythm of operation is one second of work, followed by half a second of interruption, then another second of work, and another half-second interruption, repeating this cycle. Compared to a four-cylinder engine, a three-cylinder has less turbo lag, better low-speed torque, reduced mechanical friction, and, of course, better fuel efficiency. Advantages and disadvantages of a four-cylinder engine: The principle of a four-cylinder engine is similar to that of a three-cylinder. To ensure each cylinder completes its work, the crankshaft rotates 720 degrees, so there is no gap in the continuity of power output. During any complete stroke, at least one cylinder is performing work. For engines of the same displacement, a four-cylinder has more turbo lag than a three-cylinder, poorer low-speed torque, greater mechanical friction, and higher fuel consumption.

19

3

Share

What brand is Aurus?

Is the Fuxi AS125 a genuine Yamaha?

Why Is the Air Conditioning in an Electric Vehicle Not Cooling Properly?

How to Match Gear Shifting with Speed in Subject Three?

Does idling the car with the air conditioning on consume fuel?

Is Car Film Applied on the Inside or Outside?

What is the difference between a three-cylinder and a four-cylinder engine in a car?

Should You Turn on the Windshield Wipers in Rain During Subject Three Test?

How to Check for Traffic Violations When Driving Someone Else's Car?

What does Ford EVOS mean?

Does Engine Cleaner Harm the Engine?