What brand is Alcon?

What are the differences between the Audi A4L Progressive and Fashion models?

The Progressive model comes with 225/50R17 tires, while the Fashion model features 245/40R18 tires. Features such as rearview camera, automatic parking, and full LCD instrument panel are optional for the Progressive model but standard for the Fashion model. The Fashion model's LCD instrument panel measures 12.3 inches. Below are some key details about the Audi A4L: 1. Exterior: The Audi A4L measures 4818/1843/1432mm in length, width, and height, with a wheelbase of 2908mm. It features a new hexagonal grille design and sharp headlight clusters. 2. Interior: The dashboard is tilted towards the driver's side, and higher trim levels include a full LCD instrument panel. 3. Powertrain: The A4L is equipped with a 2.0T engine (low/high power) and a 1.4T engine. The 2.0T engine delivers maximum power of 140kW (190hp) and 185kW (252hp), with the low-power 2.0T model labeled as 40TFSI and the high-power 2.0T model as 45TFSI. The 1.4T engine produces a maximum power of 110kW (150hp).

11

2

Share

What is the Rear Axle Ratio?

Rear axle ratio is an important parameter of the engine, commonly known as the rear axle ratio, and its academic name is the final drive ratio. The rear axle ratio refers to the gear transmission ratio of the main reducer in the vehicle's drive axle. It is equal to the ratio of the rotational angular velocity of the driveshaft to that of the axle's half-shaft, and also equals the ratio of their rotational speeds. Additional information: 1. Speed ratio: The speed ratio of the vehicle's drive axle, also known as the speed ratio of the main reducer assembly, can be understood as the amplification of the torque transmitted from the driveshaft, indicating how much force is needed to propel the vehicle. 2. Higher ratio, higher torque: The larger the ratio, the greater the output torque, and the slower the output speed. To achieve greater power (torque) output for the vehicle, suitable for climbing or heavy loads, a relatively larger final drive ratio (e.g., 6.83) can be selected to meet the requirements, though this sacrifices speed. 3. Lower ratio, lower torque: The smaller the speed and torque ratio, the smaller the output torque, and the faster the output speed. By selecting a relatively smaller final drive ratio (e.g., 3.89), the need for higher speed can be achieved.

20

3

Share

Where is the production date of Fengfan battery?

The production date of Fengfan battery is composed of a series of Arabic numerals and English letters, located on the surface of the battery. For example, a Fengfan battery marked as 4A0735331 indicates that 4 represents the year 2014, A stands for January (A is January, B is February, and so on), and 07 represents the 7th day of the month. The following 35331 identifier refers to the production unit code and team number. Car battery maintenance tips: 1. The car should be driven regularly: Especially for new cars, it is recommended that owners drive them periodically. Long-term parking can gradually deplete the battery's charge, leading to a dead battery over time. It is advisable to drive the car out for a period every few days to recharge the battery, keeping it as fully charged as possible, preferably for more than 20 minutes of driving time. 2. Minimize electrical usage after turning off the engine: Listening to music after turning off the engine is a common practice during daily car use, especially while waiting. Many people enjoy listening to music, but in the off state, the car consumes the battery's power. Prolonged use may drain the battery, resulting in an inability to start the car. It is recommended that owners avoid using electrical devices after turning off the engine. 3. Clean the battery regularly: During daily driving, it is necessary to clean the car battery. Use a cloth to wipe off dust, oil stains, white powder, and other contaminants that may cause leakage from the panel and the positive and negative terminals. Avoid using a wet cloth.

19

4

Share

What Type of Road is a 4.11 Gear Ratio Suitable For?

4.11 gear ratio is suitable for flat highways. The automotive transmission ratio refers to the ratio of rotational speeds between the front and rear transmission mechanisms in a vehicle's drivetrain. There are two types of transmission ratios in a vehicle's drivetrain: the final drive ratio and the gearbox ratio. Below is relevant information about gear ratios: 1. Driving Performance: In the same vehicle model, the final drive ratio is a fixed value, while the gearbox ratio varies depending on the selected gear. Data on gear ratios for various types of vehicles can be found in automotive performance manuals. Driving performance includes acceleration, torque response of the powertrain, noise, and vibration. Larger displacement engines provide greater, faster, and smoother torque responses. 2. Reducing Fuel Consumption: Front-wheel-drive systems generally offer better torque response than rear-wheel-drive systems. If the minimum transmission ratio is too small, the vehicle will struggle under heavy loads, resulting in poor acceleration, noise, and vibration. Conversely, if the minimum transmission ratio is too large, fuel economy suffers, and engine noise increases at high speeds. More gear ratios provide more opportunities for the engine to operate at its maximum power, enhancing the vehicle's acceleration and climbing ability. In terms of fuel consumption, it also increases the likelihood of the engine operating within the low fuel consumption rate range, thereby reducing fuel consumption.

7

2

Share

How is the China VI vehicle marked?

China VI vehicles do not have special markings. Generally, the information can be found on the vehicle acceptance sheet, which includes details such as the model, color, emission standard, engine number, and chassis number. The China VI identifier is 'Ⅵ'. The symbols for China 1 to China 6 standards are I, II, III, IV, V, and VI, respectively. On July 1, 2000, China first introduced the China 1 emission standard. Following the European emission standards and aligning with international norms, the symbols from China 1 to China 6 adopted Roman numerals. New emission standards have been introduced every few years since then. Below are methods to check a vehicle's emission standard: 1. Vehicle Conformity Certificate: When purchasing a car, always request relevant documents and certificates from the salesperson. The Vehicle Conformity Certificate clearly states the vehicle's emission standard. Although it may not explicitly mention whether the vehicle is China 5 or China 6, the emission standard can be clearly determined from this document. 2. Environmental Information Vehicle List: The Environmental Information Vehicle List details the vehicle's environmental impact, including its exhaust emission standard. It directly and clearly indicates the vehicle's emission stage—whether it is China 5 or China 6. By reviewing this list, the vehicle's exhaust emission stage can be easily identified. 3. Vehicle Qualification Certificate: The vehicle's emission standard is clearly stated on the relevant qualification certificate.

5

3

Share

What Size Diesel Engine is Needed for a 20 kW Generator?

A 20 kW generator is typically paired with a 150 horsepower diesel engine. A generator is a device that converts mechanical energy into electrical energy. When conductors in a closed circuit within the generator move through a magnetic field, cutting the magnetic lines of force, an induced current is generated in the circuit. The mechanical energy required for this process is usually provided by equipment such as hydroelectric generating sets or thermal power generating sets (using diesel, gasoline, coal, etc.). When selecting a diesel generator set, it is essential to consider both its comprehensive performance and economic indicators. Users should determine the frequency of use and the maximum duration of each operation to decide the appropriate size of the diesel generator set needed. The output power of the generator set is usually indicated by the rated active power in kilowatts (KW), although some may also be labeled with the apparent power in kilovolt-amperes (KVA). When operating a diesel engine, it is important to check the following: whether the radiator is filled with water (or antifreeze in winter), whether the engine oil is at the specified level, and whether the diesel tank has sufficient fuel. Additionally, inspect the electrical starting system to ensure the wiring is normal and secure, the battery fluid level is adequate, and the voltage is maintained between 24V and 26V. Verify that the high-voltage transformer switch in the power room is disconnected, as well as the main city power switch in the low-voltage distribution room. Ensure that the generator input switch in the low-voltage power room and all branch loads powered by the generator are in the off position. Finally, check the diesel generator controller to confirm that the indicator lights show normal status (yellow and green lights on) and that the main switch is in the automatic position.

14

5

Share

What brand is Alcon?

What are the differences between the Audi A4L Progressive and Fashion models?

What is the Rear Axle Ratio?

Where is the production date of Fengfan battery?

What Type of Road is a 4.11 Gear Ratio Suitable For?

How is the China VI vehicle marked?

What Size Diesel Engine is Needed for a 20 kW Generator?

Why can't the Honda Envix be used for Didi?

Can Michelin Tires with Cracks Continue to Be Used?

What are the precautions for vehicles passing through waterlogged roads?

What is the maintenance interval for the Geely Boyue?