What brand does the Lynk & Co 01 belong to?

2 Answers
KiaraAnn
07/24/25 7:52am
Lynk & Co 01 is the first model of the Lynk & Co brand, a joint venture established by Geely Auto Group, Geely Holding Group, and Volvo Cars, primarily producing sedans and SUVs. Here is more information about Lynk & Co: 1. Lynk & Co models feature internet and global DNA, positioned as compact SUVs built on the CMA platform, all equipped with a 2.0T turbocharged engine incorporating Volvo technology. 2. The Lynk & Co 01 has a body length, width, and height of 4549mm, 1860mm, and 1689mm respectively, with a wheelbase of 2734mm, a minimum ground clearance of 213mm, and uses an 8-speed automatic transmission (AT).
Was this review help?
3
4
Share
Parker
08/11/25 3:34am
I've always been quite interested in the Lynk & Co 01. It belongs to the Lynk & Co brand, a relatively young marque backed by China's Geely Group. As an automotive enthusiast, I find the Lynk & Co 01's design very trendy - its Scandinavian-inspired exterior appeals to younger drivers, and it delivers solid performance with Volvo's chassis technology underpinning its commendable safety credentials. Geely launched Lynk & Co to challenge the premium market segment, offering accessible pricing without compromising on quality compared to imported vehicles. A friend of mine owns one, and it proves highly practical for daily urban commuting with well-controlled fuel consumption, plus there's a hybrid version available for eco-conscious and economical driving. Just remember to purchase through authorized dealerships and avoid unauthorized modifications that could void the warranty. In summary, Lynk & Co has established itself through genuine capability and comes highly recommended.
Was this review help?
8
5
Share
Expand All
More Forum Discussions

How to Repair Rusted-Through Car Doors?

Solutions for rusted car doors are as follows: 1. If rust appears along the lower edge of the door, it should be addressed promptly to prevent the rust from spreading and eventually causing the car's metal sheet to rust through. 2. If the rust is superficial and covers a small area, you can use wet sandpaper to grind off the rust and then apply a layer of rust-proof paint. For minor rust spots, scrape off the rust, clean the area with sandpaper, and then proceed with touch-up painting. 3. If the door is severely rusted with large areas of paint peeling, the rusted paint must be completely removed, followed by filling and smoothing with putty. Once the putty hardens, repainting is necessary. 4. If the car's metal sheet has rusted through, the rusted portion must be cut out and re-welded. If the damage is extensive, repair is not recommended, and replacing the entire panel is advised instead. 5. Car rust should be dealt with promptly, and preventive measures should be taken. After rain, clean the car body immediately. Any scratches or damage on the car's surface should be repaired promptly to prevent oxidation and rust.
6
0
Share

What is the method for timing chain alignment on the Besturn B70?

The method for timing chain alignment on the Besturn B70 is: 1. Ensure the crankshaft is at top dead center for cylinder one, rotate the notches on the rear ends of the intake and exhaust camshafts to the horizontal position, then install the chain and attachments; 2. Secure the crankshaft pulley to the front cover with a 6mm screw, fix the crankshaft via the gear ring, and tighten the crankshaft pulley screw. Taking the 2021 Besturn B70 as an example, it is a mid-size sedan with body dimensions of: length 4810mm, width 1840mm, height 1455mm, a wheelbase of 2800mm, a fuel tank capacity of 50l, and a curb weight of 1440kg. The 2021 Besturn B70 features a MacPherson strut front suspension and a torsion beam rear suspension. It is powered by a 1.5L turbocharged engine delivering a maximum horsepower of 169ps, a maximum power of 124kw, and a maximum torque of 258nm, paired with a 6-speed manual transmission.
4
5
Share

Which Side is the Steering Wheel on American Cars?

In the United States, the steering wheel is on the left side. The steering wheel position in the U.S. is exactly the same as in our country, which is related to road traffic regulations. The U.S., along with over a hundred other countries in the continental faction, drives on the right side of the road. For driving convenience (such as overtaking and meeting other vehicles), the steering wheel is placed on the left. On the other hand, dozens of countries in the island faction led by the U.K. drive on the left side, with the steering wheel on the right. Below is some related information about American cars: 1. Americans are quite skilled at manufacturing cars with very large bodies that offer excellent comfort for passengers. 2. High-performance cars in the U.S. generally prefer to use large-displacement V8 naturally aspirated or supercharged engines. 3. The U.S. also has drag racing events, where many classic American cars can be seen. 4. The cornering performance of American cars is not particularly outstanding. Due to the wide and straight highways in the U.S., American cars perform very well in terms of comfort during long-distance high-speed cruising, but their cornering ability is relatively poor.
17
3
Share

Is an Idle Speed of 800 to 900 RPM Normal for the New Jetta?

An idle speed of 800 to 900 RPM is not normal for the new Jetta. The typical idle speed for the Volkswagen New Jetta is around 700-800 RPM. Introduction to Car Idle Speed: Car idle speed refers to a working condition. When the engine runs without load, it is called idling, meaning the car is in neutral gear. The engine speed during idling is referred to as the idle speed. The idle speed can be adjusted by modifying the throttle opening size, among other methods. Idling essentially means the engine is "running without doing work." Introduction to Car Idle State: When the engine is running, if the accelerator pedal is fully released, the engine enters the idle state. When adjusting the idle speed, the RPM should not fluctuate abruptly, as this can cause premature wear to the engine. It is best to have the idle speed adjusted at an automotive repair facility. When the car is parked and the engine is started, the minimum stable engine speed is called the parking idle speed (the process of transitioning from a cold engine idle state to the idle state at normal operating temperature is called warm-up or heating).
12
4
Share

What are the basic car maintenance items?

The regular maintenance items for cars mainly include the replacement of engine oil and oil filter, air filter, fuel filter and pollen filter, the maintenance/replacement of spark plugs, transmission oil and other related system inspection items and maintenance. 1. Engine oil and oil filter are mainly for the maintenance of the lubrication system. The main function of the lubrication system is to effectively lubricate various components of the car engine to prevent excessive wear. The function of the oil filter is to remove various impurities from the oil to ensure the normal operation of the lubrication system. The oil filter should be replaced together with the oil during an oil change. Under normal circumstances, the car needs to be serviced every 5000km. 2. The function of the air filter is to filter the air before it enters the cylinder, removing impurities, dust, sand and other foreign objects. The cleaning and maintenance of the air filter depend on the usage environment. The fuel filter is generally replaced after driving 20,000-25,000km. 3. Spark plugs are consumable parts and should be replaced every 20,000km. In addition, components such as brake fluid, transmission oil, battery, throttle, fuel injector, and brake pads are all inspection items during regular maintenance, and maintenance is carried out according to the usage conditions.
10
2
Share

What are the models of car light bulbs?

Car light bulb models include: h1, h4, h7, 9005, 9006. The methods to distinguish car bulb models are: 1. Check if the headlight is a combined high/low beam unit - if yes, it indicates the bulb model is h4; 2. Open the hood, remove the headlight protective cover and take out the bulb to identify by the pins and base; 3. If the headlight has 1 pin with a flat rectangular metal base, it's h1; 4. If the headlight has 3 pins with a round metal base and 3 protruding tabs on the outer edge, it's h4; 5. If the headlight has 2 pins with a round metal base and 1 protruding tab on the outer edge, it's h7; 6. If the headlight has 2 pins with an oval socket and one longer protruding tooth on the lower edge, it's h11; 7. If the headlight has 2 pins with an oval socket and one smaller protruding tooth on the upper edge, it's 9005; if there are two smaller protruding teeth on the upper edge, it's 9006.
19
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.