What brand are the tires on the Nissan Sylphy?

2 Answers
JadeMarie
07/25/25 2:37pm
Nissan Sylphy tires are Dunlop brand. The Nissan Sylphy is a compact 4-door 5-seater sedan with body dimensions of 4631mm in length, 1760mm in width, and 1503mm in height, with a wheelbase of 2700mm and a fuel tank capacity of 50 liters. The Nissan Sylphy is equipped with a 1.6L naturally aspirated engine and a 5-speed manual transmission, delivering a maximum power of 90 kilowatts at 6000 rpm and a maximum torque of 155 kilowatts at 4000 rpm. It features front-wheel drive, with a front suspension using MacPherson independent suspension and a rear suspension using a torsion beam non-independent suspension.
Was this review help?
14
4
Share
VonLilliana
08/11/25 9:11pm
Having driven for nearly twenty years, I have some knowledge about the tire brands of the Nissan Sylphy. The brand isn't fixed; it depends on the production year and configuration. Common original equipment brands are Bridgestone or Dunlop, especially in the Chinese market, but sometimes Michelin or Goodyear. Original tires affect driving stability and safety; neglecting maintenance can easily lead to accidents. I recommend owners check the sidewalls of their car tires, where the brand is marked, and regularly measure tire pressure and tread depth to extend their lifespan. When replacing tires, choose energy-saving ones to save fuel and be eco-friendly. I personally experienced a tire blowout accident, and since then, I've taken tire maintenance seriously. Before driving, I always check the tire pressure monitor to ensure safety. In short, choosing the right tires for the Sylphy makes driving more reassuring.
Was this review help?
15
3
Share
Expand All
More Forum Discussions

What is the Function of a Central Differential?

The function of a central differential is: when the car is turning or driving on uneven roads, it allows the left and right wheels to roll at different speeds, ensuring that both driving wheels perform pure rolling motion. The central differential refers to a component in multi-axle drive vehicles, where the drive axles are connected by drive shafts. To enable each drive axle to potentially have different input angular velocities and eliminate wheel slippage, a central differential can be installed between the drive axles. The main types of central differentials include conventional central differentials, multi-plate clutch central differentials, Torsen central differentials, and viscous coupling central differentials.
16
3
Share

What does the sun-like light on the Lavida tachometer indicate?

A sun-like light appearing on the tachometer indicates a bulb failure warning light. This warning light can illuminate when bulbs such as the brake light, inconspicuous license plate light, width marker light, or reverse light are damaged. While it does not prevent the car from continuing to operate, the issue should be addressed as soon as possible. The bulb failure warning light may illuminate for the following reasons: 1. There is a loose connection in the wiring, affecting the resistance value of the lighting circuit, causing the dashboard computer to mistakenly identify the bulb as faulty. 2. Poor wiring contact. 3. The bulb filament is partially broken. Solution: Park the car in a safe location, turn off the engine, use a wrench to remove the negative terminal of the battery, wait for 15 seconds, and then reconnect it. The warning light should disappear.
13
3
Share

What is the engine model of the Golf R?

The new Golf R is equipped with a turbocharged engine model EA882.0T, paired with a 6-speed dual-clutch transmission. Below is a detailed introduction to the Golf R engine: 1. This engine is currently one of Volkswagen's most popular engines, delivering a maximum horsepower of 300 hp. 2. The Golf R's 2.0-liter turbocharged engine has a maximum power output of 188 kW and a maximum torque of 330 Nm. The maximum engine speed is 6,000 rpm, while the maximum torque range is from 2,400 to 5,200 rpm. This engine features direct fuel injection technology and utilizes an aluminum cylinder head with a cast iron cylinder block. 3. The EA888, in its low-power Gen3B version, adopts Miller cycle technology. Through a specially designed low-lift camshaft and VVT variable valve timing system, it achieves the Miller cycle with early valve closing, reducing pumping losses, improving thermal efficiency, and significantly lowering fuel consumption under daily driving conditions.
11
4
Share

How to Check the Oil Dipstick on a Haval M6?

The method to check the oil dipstick on a Haval M6 is as follows: The oil dipstick of the Haval M6 is usually located next to the engine. Make sure the vehicle is cooled down. After pulling out the dipstick for the first time, wipe it clean with a clean tissue, then reinsert it. Upon pulling it out the second time, you can check the oil level on the dipstick. If the oil level is between the upper and lower limits, it indicates that the oil level is normal. To check the oil dipstick, first pull it out, then wipe off any residual oil with a cloth before reinserting it into the oil pan. This is because, during normal engine operation, oil splashed by the crankshaft may adhere to the dipstick, which can mix with the oil in the oil pan and affect the accuracy of the oil level reading.
14
3
Share

What are the consequences of unplugging the throttle position sensor?

The consequence of unplugging the throttle position sensor is that it directly affects the performance and lifespan of the car. The throttle position sensor, also known as the throttle opening sensor or throttle switch, is typically a device used to detect the engine's condition. It determines whether the engine is in an idle working state or a composite working state. Essentially, the throttle position sensor is a variable resistor and several switches installed on the throttle body. When the throttle is in the idle position, the idle contact closes and sends an idle working state signal to the computer. When the throttle is in other positions, the idle contact opens, and the computer can identify the engine's load through the signals from the throttle position sensor. Based on these working state signals, the computer adjusts the engine's fuel injection amount to control gasoline usage.
18
0
Share

What materials are used for polishing glass?

Polishing glass uses polishing liquid or polishing powder. The main component of polishing materials is cerium oxide, with polishing powder being cerium oxide polishing powder, and polishing liquid being a water-soluble polishing agent free from sulfur, phosphorus, or chlorine additives. Both materials have moderate hardness, enabling fine polishing of glass with excellent results. Polishing can remove surface patterns, scratches, and other imperfections from glass, improving its transparency and refractive index, thereby restoring the glass to its original clarity. Before polishing, it is necessary to clean the glass surface of impurities to avoid secondary damage during polishing. Then, apply the polishing liquid to the polishing machine, ensuring uniform polishing force and appropriate pressure, with slow grinding to guarantee the desired effect.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.