What brand are the tires on the Mitsubishi ASX?

1 Answers
Nascimento
07/29/25 10:49pm
The original tires of the Mitsubishi ASX are Dunlop, with the specification 215/60R17. The yellow dot on the tire is a light point mark, indicating the lightest spot on the tire. Since a car wheel consists of the tire, rim, and valve stem, and the valve stem is the heaviest part of the tire, these two points complement each other to achieve tire balance. Below is some information about tires: 1. Tire specifications: Tire specifications are data that indicate the parameters and performance of the tire. Generally, tire specifications are a set of numbers, with the first number representing the tire section width and the last number representing the rim diameter, both measured in inches. The letters or symbols in between have special meanings: "x" indicates a high-pressure tire; "R" or "Z" indicates a radial tire; "-" indicates a low-pressure tire. 2. Tire rolling direction: The tread pattern on a tire is crucial for drainage and anti-skid performance while driving. Therefore, off-road tires with asymmetric tread patterns often use arrow markings to indicate the assembly rolling direction, ensuring the designed grip, anti-skid, and other performance characteristics. 3. Tire production batch number: A set of numbers and letters indicates the manufacturing date and quantity of the tire. For example, "98N08B5820" means the 5,820th tire produced in Group B in August 1998. The production batch number helps identify the age and storage time of the tire.
Was this review help?
3
2
Share
More Forum Discussions

Where is the low-pressure port of the Jaguar XF air conditioning system located?

The low-pressure port of the Jaguar XF air conditioning system is located under the hood of the Jaguar XF, inside the engine compartment, between the coolant reservoir and the transmission. Additional information: Here are the specific steps to locate the low-pressure port of the Jaguar XF air conditioning system: 1. Open the driver's door of the Jaguar XF; 2. Pull the hood release lever located on the left side of the driver's leg area; 3. Lift the hood of the Jaguar XF upwards; 4. Secure the hood with the support rod to ensure it is firmly held in place and to avoid any hazards during the operation; 5. The low-pressure port of the Jaguar XF air conditioning system is located under the front hood of the Jaguar XF, inside the engine compartment, between the coolant reservoir and the transmission.
7
4
Share

What Does Engine Idle Speed Refer To?

Idle speed refers to an operating state of the engine where there is no external power output. It is one of the five basic operating conditions of an engine, which include cold start, idle, acceleration, light load, medium load, and heavy load. The purpose of idle speed is to overcome the internal resistance of the engine and maintain a non-stalling state. The following are the impacts of idle performance on gasoline engines: 1. Fuel Economy: Since engines frequently operate at idle, statistics show that urban vehicles consume about 30% of their fuel during idle conditions. Therefore, reducing fuel consumption during idle is crucial, which is also a requirement for idle control. The primary measure to reduce idle fuel consumption is lowering the idle speed. 2. Emissions: During idle conditions, gasoline engines have a high amount of residual exhaust gases in the cylinders. To ensure stable combustion, the air-fuel mixture needs to be enriched, leading to incomplete combustion and the production of harmful emissions such as CO and HC. Experiments have shown that the lower the idle speed, the more pronounced the dilution effect of exhaust gases, further increasing the concentration of CO and HC emissions. Thus, increasing idle speed is beneficial for reducing CO and HC emissions.
8
0
Share

Can You Drive with an Expired Temporary License Plate?

Temporary license plates cannot be used on the road once expired. Relevant information is as follows: 1. Regulations: Vehicles that have not obtained a formal license plate after the expiration of the temporary license plate are not allowed to drive on the road. According to the "Road Traffic Safety Law," this situation is equivalent to "failing to display a license plate as required." The penalty for "failing to display a license plate as required" under the "Road Traffic Safety Law" is a fine of 200 yuan and 12 demerit points. 2. Introduction to temporary plates: After obtaining a temporary license plate, the owner should carefully verify the information on it. The front of the temporary plate must clearly print the validity period, while the back should include information fields such as the engine number, chassis number, issuer, issuance date, etc., all of which must correspond to the vehicle and the issuer's information. Each item should be accurate and complete. If a temporary plate does not meet the above requirements, you can file a complaint with the Vehicle Management Office of the Traffic Police Brigade under our bureau.
4
3
Share

Is ETC Card Skimming Real?

ETC cards inserted in vehicles can be skimmed, so it is recommended to remove the ETC card when parking to prevent unauthorized transactions. Precautions for ETC Usage: The ETC transaction sensing range is 8 meters. When encountering a stationary vehicle ahead, maintain a distance of over 10 meters to prevent automatic fee deduction for the preceding vehicle in case of ETC device malfunction or absence. The recognized speed for ETC lane passage is 20km/h. Excessive speed may result in failure to read vehicle device information and unsuccessful fee deduction. Unauthorized removal or movement of OBU devices, detachment or loosening of ETC electronic tags may render them ineffective. These can be taken to the issuing bank or highway service center for inspection. Non-deliberate loosening or detachment only requires reactivation. When using a debit card linked to ETC, insufficient balance may cause fee deduction failure. Follow on-site staff guidance to use manual MTC lanes with cash or card payment. Excessively thick windshields may cause poor signal reception. This is particularly noteworthy for vehicles with replaced windshields after accidents or modified front windshields.
13
5
Share

How to Identify a Stock Car When Buying a Car?

Here are the methods to identify a stock car: 1. Check the production nameplate: Usually, there is a nameplate on the lower part of the B-pillar on the right side (passenger side) of the vehicle, which indicates the production date of the vehicle, engine parameters, and other information, making it easy to see. 2. Check the glass: The production date of the glass is marked on the car glass. The number represents the year, and the black dots represent the month. If the black dots are in front, subtract the number of black dots from 7; if the black dots are behind, subtract the number of black dots from 13 to get the month. 3. Check the tires: It may not be 100% certain whether the car is a stock car, but the production date of the tires can give a rough estimate of the production time. The four-digit number indicates the week (first two digits) and the year (last two digits). By observing the tires, you can preliminarily judge whether the car has been driven many miles since production. New car tires should be relatively clean, and the tire hairs should still be intact. 4. Check the engine compartment: Open the engine hood and see if it is clean. If it is particularly dirty or has a lot of dust, it indicates that the car has been parked in a harsh environment.
20
4
Share

What is the fuel consumption of the Qashqai?

The fuel consumption of the Qashqai is 6.8-7.3L/100km. Additional Information: Methods to reduce fuel consumption are as follows: 1. Regular maintenance: Regular maintenance can reduce the failure rate of the car and also lower fuel consumption. Maintenance includes replacing parts such as spark plugs, oil filters, brake fluid, radiator coolant, air filters, power steering fluid, transmission fluid, etc. Keeping the vehicle in optimal condition helps reduce fuel consumption. 2. Avoid hard acceleration: Hard acceleration only shortens driving time by 4%, but increases fuel consumption by 37%-40%. On typical urban roads, the speed is usually maintained at 50 km/h, with engine RPM around 2000-2500. On highways, the speed is generally 90-110 km/h. For every 10 km/h increase in speed, fuel consumption increases by 10%. Avoid hard acceleration as RPM is the biggest factor affecting fuel consumption. 3. Reduce weight: For every 100KG increase in vehicle weight, fuel consumption increases by 4%-5%. 4. Maintain tire pressure within the normal range: Checking tire pressure not only benefits fuel consumption but also ensures driving safety. Develop a habit of checking tire pressure daily. Generally, the front tire pressure should be 2.2-2.3, and the rear tire pressure should be 2.4-2.5.
11
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.