What brand are the tires on the Changan CS55?

1 Answers
SanLorenzo
07/25/25 2:31pm
The Changan CS55 tires come in two brands: First: Continental. Continental Tires is the world's third-largest tire manufacturer and Europe's largest automotive parts supplier. Renowned for all-weather safety and reliability, these tires feature low noise and strong self-cleaning capabilities. They offer extremely high instantaneous overload capacity, responsive handling, and cornering stability, along with excellent braking performance on both dry and wet surfaces. They also have superior water drainage protection and are the only road tires globally approved for driving at speeds up to 360 km/h, earning them a place in the Guinness World Records. Second: Yokohama. Yokohama was established in Japan on October 13, 1917, and officially rebranded as Yokohama in China in 2008. Since its inception, the company has specialized in rubber technology. Yokohama tires incorporate design technology that reduces air resistance during driving. This innovative eco-friendly technology decreases tire rolling resistance and improves airflow around the tire during vehicle operation, thereby achieving fuel-saving and environmental benefits.
Was this review help?
20
1
Share
More Forum Discussions

Why Do I Always Cross the Line When Driving Through Curves?

Sitting in the driver's seat and looking forward, there is a blind spot of several meters due to the obstruction of the front part of the car. The driver may feel as if they are about to cross the line and thus hesitate to stay too close to the outer edge, often steering inward instead. This can result in the car being too close to the inner side, causing the inner rear wheel to touch or cross the inner protruding area. Below are some key points drivers should pay attention to: 1. Touching the protruding area one: (1) Crossing the inner line immediately upon entering the curve. This happens when turning the wheel left too early or too much upon entering the curve. The correct approach is to turn the wheel one full turn first and make gradual minor adjustments while driving. (2) Crossing the inner line in the middle or later part of the first curve. This occurs when the minor adjustments made after turning left are too large. The correct adjustment should not exceed 1/4 of a full turn after the initial full turn. 2. Touching the protruding area two: (1) Crossing the inner line immediately upon entering the second curve. This is caused by turning the wheel right too early or too much when entering the right curve. The correct method is to straighten the wheel first and then turn it one full turn, making gradual minor adjustments while driving. (2) Crossing the inner line in the middle or later part of the second curve. This happens when turning the wheel right too much or making minor adjustments that are too large. The correct adjustment should not exceed 1/4 of a full turn after the initial full turn. 3. Curve exit: When the car's front is aligned with the exit direction of the curve, the steering wheel should be straightened in time to avoid the right rear wheel crossing the line.
1
5
Share

How Long Does It Take for a Car Engine to Cool Down After Stopping?

It takes about 40 minutes for a car engine to cool down after stopping. Engine cooling is necessary to prevent the engine from seizing due to rapid temperature drop after shutdown. An engine is a machine that converts other forms of energy into mechanical energy. It can be categorized into: 1. External combustion engine: Fuel burns outside the engine; 2. Internal combustion engine: Fuel burns inside the engine; 3. Gas turbine: High-pressure gas generated by combustion is used to rotate turbine blades and output power; 4. Jet engine: An engine that directly generates thrust by expelling high-speed gas from a nozzle.
17
1
Share

What is the Difference Between Nitrogen and Air in Tires?

Tire nitrogen and air differ in principle: nitrogen filling uses pure nitrogen to inflate tires; air compresses atmospheric air into an air compressor, which then inflates the tires. Nitrogen is the most abundant gas in Earth's atmosphere, with stable chemical properties, making it less prone to chemical changes. Air is composed of 78% nitrogen, 21% oxygen, and 1% other gases. Tires are one of the important components of a car, directly in contact with the road surface, working together with the car's suspension to mitigate the impact during driving, ensuring good ride comfort and smooth driving.
18
0
Share

What car has a cross with a snake logo?

The cross with a snake logo represents Alfa Romeo, an Italian automobile manufacturer. Taking the 2020 Alfa Romeo Giulia Luxury Edition as an example, its body dimensions are: length 4643mm, width 1860mm, height 1438mm, with a wheelbase of 2820mm, a fuel tank capacity of 58 liters, and a trunk capacity of 480 liters. The 2020 Alfa Romeo Giulia is equipped with a 2.0T turbocharged engine, delivering a maximum power of 206kW and a maximum torque of 400Nm, paired with an 8-speed automatic transmission.
5
1
Share

What are the types of automotive air conditioning systems?

Automotive air conditioning systems can be categorized into independent and non-independent types based on their driving methods. In terms of performance, they are classified as single-function type and integrated heating/cooling type. Regarding control methods, they are divided into manual control, electrically controlled pneumatic adjustment, fully automatic adjustment, and microcomputer-controlled fully automatic adjustment. The automotive air conditioning system, abbreviated as car AC, is used to regulate and control the temperature, humidity, air cleanliness, and airflow inside the vehicle cabin to an optimal state. It provides a comfortable riding environment for passengers, reduces travel fatigue, creates favorable working conditions for drivers, and serves as a crucial ventilation device for ensuring safe driving.
3
2
Share

Can Manual Transmission Cars Use Cruise Control?

Manual transmission cars can use cruise control. Cruise control automatically maintains the vehicle speed as set by the driver without the need to press the accelerator pedal, allowing the car to travel at a fixed speed. When the cruise control function is activated, pressing the accelerator can increase the speed to or above the minimum cruise control speed. Once the cruise control is confirmed to be active, the engine will automatically supply fuel to meet the power demand for the current speed. The steps to use cruise control are: 1. Locate and press the cruise control button on the steering wheel; 2. When the car reaches the desired cruise speed, press the set button downward; 3. After setting the cruise speed, you can press the button upward or downward to fine-tune the speed; 4. Always pay attention to road conditions while using cruise control.
15
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.