···
Log in / Register

What brand are the tires on the 2017 Verano?

3 Answers
SanGeorge
08/31/25 4:53am
The tires on the Verano are the Goodyear EfficientGrip series. Below is the relevant introduction: 1. Buick Verano: The Buick Verano is a mid-size sports sedan under SAIC-GM Buick. As a new-generation global strategic model for Buick, the Verano integrates General Motors' global advantages, combining stylish and dynamic appearance, refined and comfortable driving space with precise and agile sports performance, bringing a brand-new driving experience to the new generation of elites. 2. Design: The Buick Verano is built based on Buick's latest family design language, featuring a winged chrome grille, winged LED automatic sensing headlights, winged LED taillights, 17-inch ten-spoke two-tone aluminum alloy sports wheels, and a fastback roof.
Was this review help?
10
3
Share
DelDaniela
09/12/25 8:09am
As an owner of the 2017 Buick Verano, I paid attention to the tire configuration when I first picked up the car. The original tires were Goodyear Assurance ComfortTred, which focus on quietness and wet traction. Later, I found that some mid-to-low trim models from the same year were equipped with Maxxis MA510 tires, which prioritize durability and tread design. My suggestion is to check the wheel size: 15-inch wheels often come with Maxxis, while 16-inch wheels usually have Goodyear. The set on my car lasted over 60,000 kilometers before replacement, with slower rubber aging than expected, making them sufficient for city commuting. Different batches of cars may have varying tire brands, so it's best to check the logo on the tire sidewall yourself for accuracy.
Was this review help?
1
1
Share
Expand All
VonRuby
10/27/25 2:12am
Last time at the repair shop when lifting the Verano, I specifically observed the tire details. This generation of cars mainly comes with Goodyear Assurance series as original tires, featuring thickened anti-collision design on the sidewalls. Some base models also use Maxxis or Hankook tires, but the proportion is small. Having seen over a dozen 2017 models during repairs, more than 70% were equipped with Goodyear. These tires have deeper drainage grooves, providing good anti-slip performance in rainy seasons, though the downside is slightly higher road noise. In the current second-hand market, original tires cost around 400 yuan each. Remember to perform wheel balancing when replacing them.
Was this review help?
15
2
Share
Expand All
More Forum Discussions

Differences Between the Tharu Comfort Edition and Luxury Edition

The Tharu is available in four series: Comfort Edition, Luxury Edition, Fashion Edition, and Flagship Edition. The differences between the Comfort Edition and Luxury Edition are as follows: 1. Different market prices: The official guide price of the Tharu Luxury Edition is 188,800 yuan; The official guide price of the Tharu Comfort Edition is 182,800 yuan. 2. Different tire specifications: The Tharu Comfort Edition has front and rear tire specifications of 225/55R17; The Tharu Luxury Edition has front and rear tire specifications of 225/50R18. 3. Different configuration features: The Tharu Comfort Edition lacks functions such as a reversing camera and front seat heating; The Tharu Luxury Edition includes a reversing camera, front seat heating, GPS navigation system, voice recognition control system, and vehicle internet system functions.
17
0
Share

Is Hongqi a Domestic Brand?

Hongqi is produced in China and is a high-end brand directly operated and manufactured by the headquarters of FAW Group. In 1958, the first Hongqi-branded car was born, becoming the official vehicle for state leaders and major national events. Here is relevant information: 1. Brand Philosophy: The new Hongqi will highlight the concepts of "New Nobility," "New Exquisiteness," and "New Sentiment," deeply integrating China's excellent culture with world-class advanced culture, modern fashion design, cutting-edge technology, and refined emotional experiences to create outstanding products and services. 2. Strategic Goal: To establish the new Hongqi as the "New Nobility Brand" that is "China's First and World-Famous," meeting consumers' pursuit of a "better life and wonderful travel" in the new era, and shouldering the historical mission of strengthening China's automotive industry. 3. Product Lineup: The new Hongqi includes four major product series: L Series—New Nobility Hongqi Supreme Cars; S Series—New Nobility Hongqi Coupes; H Series—New Nobility Hongqi Mainstream Cars; Q Series—New Nobility Hongqi Business Travel Cars.
8
3
Share

Is it normal to hear a hissing sound when opening the fuel tank cap?

It is normal to hear a hissing sound when opening the fuel tank cap because, after unscrewing the cap, some gas enters the tank, causing a pressure difference between the inside and outside, which results in the hissing sound. Below are the relevant explanations: 1. There is a significant amount of gasoline vapor inside the tank, leading to relatively high pressure, which is released the moment the cap is opened. Although the pressure inside the tank is high, it does not become infinitely large mainly because, while driving, the gasoline vapor pushes open the carbon canister valve at the top, enters the carbon canister through the pipeline, and is absorbed by it. 2. Once the gasoline vapor reaches a certain concentration, it stops evaporating further, naturally reducing the pressure. However, if you hear a thumping sound from the fuel tank while driving, it might be due to a blocked vent valve on the fuel tank cap, which can be resolved by clearing it. It is important to note that if the fuel pump nozzle frequently shuts off prematurely or if the pressure is excessively high, it is advisable to have it checked at a 4S shop, as it could be caused by damage to the carbon canister, its pipelines, or the carbon canister solenoid valve.
19
5
Share

At what level of wear should brake discs be replaced?

Brake discs are critical components of the braking system. Generally, front brake discs should be inspected every 60,000 kilometers, and rear brake discs every 120,000 kilometers. The maintenance intervals specified by different vehicle manufacturers may vary, so the replacement cycle should follow the manufacturer's requirements. There are three primary methods to determine if brake discs need replacement: 1. Listen for sounds: If a metallic scraping or squealing noise occurs when lightly applying the brakes (which could also be due to initial bedding-in of new brake pads), the brake pads must be replaced immediately. 2. Check the brake disc warning light: Typically, the dashboard's brake disc warning light serves as an indicator for replacement. Normally, this light remains off. If the brake disc malfunctions or becomes excessively worn, the light will illuminate and turn off after repairs. When the warning light is on, the brake disc has reached its wear limit, braking efficiency is reduced, significantly compromising driving safety. 3. Measure the brake disc thickness: Most brake disc products feature wear indicators with three small dimples on the surface. Using a caliper, measure the depth of these dimples, which is 1.5mm. This means when the total wear depth on both sides of the brake disc reaches 3mm, it is advisable to replace the brake disc promptly.
5
5
Share

Correct Method for Parking an Automatic Transmission Vehicle

Correct steps for parking an automatic transmission vehicle: 1. Bring the vehicle to a complete stop. 2. Keep the brake pedal depressed and shift the gear to N (Neutral). 3. Engage the parking brake, then release the foot brake. 4. Shift to P (Park). 5. Turn off the engine. Compared to manual transmission vehicles, automatic transmission cars have an additional P gear when parking. The purposes of P and N gears are as follows: 1. P gear can be understood as N gear with an additional locking gear. The P gear was originally designed for long-term parking. 2. The N gear was designed for short-term (temporary) parking. When a car is in N gear (neutral), it can move if subjected to external force. When in P gear, the locking gear can secure the output shaft gear in the transmission, effectively immobilizing the stationary vehicle.
2
3
Share

What are the two major mechanisms and five major systems of an engine?

Here is the relevant introduction about the two major mechanisms and five major systems of an engine: Two Major Mechanisms 1. Crank Connecting Rod Mechanism: The crank connecting rod is an important component of an automobile engine that realizes the working cycle and completes energy conversion. It consists of the body group, piston connecting rod group, and crankshaft flywheel group. 2. Valve Train Mechanism: The function of the valve train mechanism is to open and close the intake and exhaust valves according to the working sequence and process of the engine, allowing the combustible mixture or air to enter the cylinder and exhaust the waste gas from the cylinder to achieve the gas exchange process. Five Major Systems 1. Starting System: The process of turning the crankshaft under external force until the engine begins to idle automatically is called engine starting. The device required to complete the starting process is called the engine starting system. 2. Fuel Supply System: The function of the gasoline engine fuel supply system is to prepare a certain quantity and concentration of the mixture according to the requirements of the engine, supply it into the cylinder, and exhaust the burned gas from the cylinder. 3. Cooling System: The function of the cooling system is to dissipate the heat absorbed by the heated parts in time to ensure that the engine works at the most suitable temperature. The cooling system of a water-cooled engine usually consists of components such as the cooling water jacket, water pump, fan, radiator, and thermostat. 4. Lubrication System: The function of the lubrication system is to deliver a certain amount of clean lubricating oil to the surface of relatively moving parts to achieve liquid friction, reduce frictional resistance, and alleviate wear of the parts. 5. Ignition System: The ignition system usually consists of components such as the generator, battery, distributor, ignition coil, and spark plug.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.