What brand are the tires on the 16 Emgrand?

1 Answers
SanAurora
07/29/25 10:28pm
16 Emgrand tires are from the domestic brand Giti. Here is some related information about Emgrand tires: 1. Emgrand Tires: All Geely Emgrand models are equipped with tires from the domestic brand Giti. Car tires can be divided into pneumatic tires and solid tires based on their carcass structure. The vast majority of modern cars use pneumatic tires. Depending on the internal air pressure, pneumatic tires can be categorized into high-pressure tires, low-pressure tires, and ultra-low-pressure tires. Low-pressure tires are commonly used in various types of vehicles. 2. New Emgrand Car: The new Emgrand will be equipped with a 1.5L engine and a 1.3T engine. The 1.5L engine has a maximum power of 109 horsepower and a peak torque of 140 N·m, while the 1.3T engine has a maximum power of 133 horsepower and a peak torque of 185 N·m. In terms of transmission, the engines are paired with a 6-speed manual transmission and a CVT transmission.
Was this review help?
15
4
Share
More Forum Discussions

Where is the air conditioning filter element of the Lingzhi M5 located?

The air conditioning filter element of the Lingzhi M5 is located in the engine compartment, near the front windshield of the car. The function of the air conditioning filter element is to provide fresh air, adsorb harmful substances, and filter solid impurities. Here is the relevant introduction of the Lingzhi M5: 1. Body dimensions: It is an MPV with body dimensions of 4715mm in length, 1720mm in width, 1955mm in height, and a wheelbase of 2800mm. 2. Power: It is equipped with a 1.6L naturally aspirated engine, with a maximum horsepower of 122ps, a maximum power of 90kw, a maximum torque of 151nm, and is paired with a 5-speed manual transmission.
6
1
Share

How to Handle a Car Out of Control?

Here are the situations that may occur when a car is out of control and the corresponding handling methods: 1. Sudden loss of steering control: Immediately shift to a lower gear to reduce speed, turn off the engine throttle, and use the handbrake gently or apply the foot brake intermittently (pump the brakes) to bring the car to a stop as quickly as possible. When using the foot brake, avoid excessive force to prevent the car from skidding and causing greater danger. 2. Sudden tire blowout: If the front tire suddenly blows out while driving, the car will immediately veer to the side of the blown tire. At this point, use both hands to firmly control the car's direction, quickly reduce the throttle, and ensure the car slowly moves to the roadside, decelerating smoothly. Use the engine's drag resistance to bring the car to a stop on its own. Before the speed is reduced, do not rush to use the brake, as this may cause the car to skid violently. 3. Sudden brake failure: In this case, try to stop the car as quickly as possible. Quickly shift out of high gear, press the throttle to shift into a lower gear, then reduce the throttle, using the engine's idle drag to slow down the car. At the same time, maintain control of the steering wheel, following the principle of 'yielding to people before objects' to avoid dangerous targets and drive to the roadside to turn off the engine and stop.
18
0
Share

How to Avoid Traffic Jams on Highways During Spring Festival?

During the Spring Festival, you can first check the traffic conditions or choose other means of transportation. Here are some suggestions for traveling on highways during the Spring Festival: 1. Check the situation: In advance, use the radio or other methods to understand the traffic conditions on the highways. If you learn that the route you plan to take is congested, it is advisable to choose a detour to avoid getting stuck on the highway and wasting time. 2. Detour: Before traveling, plan multiple routes and arrange a reasonable travel route. This way, even if one route is congested, you can choose another route to continue your journey without significant delays. 3. Choose other transportation methods: You can also opt for other means of transportation or alternative travel methods.
3
1
Share

What is the actual fuel consumption measured by Ford Edge owners?

Ford Edge's combined fuel consumption is 7.3-7.6L/100km. There are currently 6 models of Ford Edge on sale: the two-wheel drive Enjoy version, two-wheel drive Smart Premium version, and two-wheel drive Shine version, with a combined fuel consumption of 7.3L/100km. The four-wheel drive Premium version, four-wheel drive Shine version, and four-wheel drive Premium Plus version have a combined fuel consumption of 7.6L/100km. The above figures are NEDC combined fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than this value, ranging from 8.2-11.5L/100km. Here are 5 tips to help reduce fuel consumption while driving: When starting the vehicle, use a low gear, gently press the accelerator, and accelerate slowly. Avoid suddenly flooring the accelerator, as this can multiply fuel consumption. Gentle acceleration and braking, early braking: While driving, press the accelerator gently to avoid sudden increases in engine speed and prevent the car from shaking during operation, making the vehicle more fuel-efficient. By anticipating road conditions and accelerating or braking slowly and evenly, fuel economy can be improved by up to 20%. Maintain proper tire pressure: Keep tire pressure at the level recommended by the manufacturer. For every 2 PSI below the recommended value (approximately 0.2 in metric units relative to the standard pressure of 2.4), fuel consumption increases by 1%. Regular maintenance or vehicle inspection: Timely oil changes can reduce carbon buildup (carbon deposits can cause poor ignition, sluggish acceleration, increased fuel consumption, and in severe cases, even cylinder misfires). Regularly check and replace the air filter when dirty, and clean or replace the fuel injectors, spark plugs, and throttle body as per the mileage. Close windows while driving. Driving with windows open increases wind resistance. The greater the wind resistance, the more resistance the car encounters, requiring more power and thus increasing fuel consumption.
9
2
Share

How to Use the Car Wireless Charging Function?

First, secure the car wireless charger in an appropriate position in the cabin. Connect the data cable plug of the wireless charger to the car's cigarette lighter socket, and the other end to the wireless charger. Ensure the wireless charger is firmly fixed to prevent slipping, and it will be ready for use. Below is some related information about car wireless charging: 1. Working Principle: Wireless charging operates based on electromagnetic induction, utilizing the electromagnetic induction between a pair of coils to achieve charging. All wireless charging products adopt this technical principle. 2. Precautions: It's important to note that for wireless charging technology to work, the mobile phone must support wireless charging. Wireless charging is an added feature for electronic products, enhancing convenience. It also eliminates safety hazards such as electric leakage or power loss associated with traditional chargers.
17
3
Share

How Long is the Validity Period of a Driving Skill Permit?

The validity period of a driving skill permit is three years. Below is relevant information about the driver's license: 1. Regarding the probation period of the driver's license: The probation period lasts for one year starting from the day the license is obtained. During the probation period, driving on highways is not allowed. Drivers with a C1 license during the probation period should be cautious not to commit any violations that result in a 12-point deduction. If 12 points are deducted, the probationary driving qualification will be immediately revoked. For large vehicle licenses (B-class and above), if 6 to 12 points (but less than 12 points) are deducted during the probation period, the probation period will be extended by one year, and the holder must take the subject one exam within 30 days after the probation period ends. 2. Renewal after the driver's license expires: After the one-year probation period, there is no need to go to the issuing vehicle management office for renewal, as the system will automatically convert the probation period to a regular license. However, any violations must be handled. After six years, the holder must go to the issuing vehicle management office to renew the license. The required materials include: a medical examination form (from a hospital designated by the traffic police department), the driver's license, ID card, an application form filled out at the vehicle management office, and three one-inch color photos.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.