What brand are the original wheels of the 2014 Fit?

1 Answers
MacConnor
07/30/25 8:39am
2014 Fit original wheels are ENKEI. The wheel hub is the rotating part of the wheel steel connected through the spokes inside the tire, which is the metal component mounted on the axle that supports the center of the tire. Taking the 2014 Fit LX manual comfort model as an example, its body dimensions are: length 4065 mm, width 1695 mm, height 1525 mm, wheelbase 2530 mm, and fuel tank capacity 40 liters. The 2014 Fit LX manual comfort model is equipped with a 1.5L naturally aspirated engine, with a maximum power of 96 kW and a maximum power speed of 6600 rpm, matched with a 5-speed manual transmission.
Was this review help?
8
4
Share
More Forum Discussions

What to Do If Vehicle Fails Emission Test?

There are mainly two reasons why a vehicle's emissions fail to meet standards: 1. Poisoned Catalytic Converter: This occurs due to high sulfur content in gasoline or the use of sulfur-phosphorus antioxidant in lubricants. The gasoline and lubricants should be replaced promptly. 2. Catalytic Converter Failure: Catalytic converter failures are categorized into reversible and irreversible failures. Reversible failure happens when the catalytic converter is used beyond its service life, leading to high-temperature deactivation of the catalyst. Irreversible failure is caused by sintering or damage to the catalytic converter. Additional Information: Composition of Vehicle Emissions: The main components of vehicle emissions include carbon monoxide, hydrocarbons, nitrogen oxides, carbon dioxide, sulfur dioxide, lead compounds, and some particulate matter.
9
4
Share

What are the characteristics of diesel engines compared to gasoline engines?

Compared to gasoline engines, diesel engines have characteristics such as higher compression ratio, better thermal efficiency, and superior fuel economy. The differences between gasoline and diesel engines are as follows: 1. Firstly, the injection method is different: conventional gasoline engines mix gasoline with air before entering the cylinder, while diesel engines directly inject diesel into the cylinder already filled with compressed air. 2. Ignition method differs: gasoline engines require spark plugs to ignite the air-fuel mixture, whereas diesel engines rely on compression auto-ignition. 3. Compression ratio varies: diesel engines generally have a higher compression ratio than gasoline engines, resulting in greater expansion ratio and thermal efficiency, leading to lower fuel consumption compared to gasoline engines. 4. Intake stroke: diesel engines draw in pure air, while gasoline engines intake a mixture of air and gasoline.
15
2
Share

How often should the cabin air filter and engine air filter be replaced in a sedan?

The cabin air filter should typically be replaced every 10,000-20,000 kilometers or approximately once a year, while the engine air filter requires replacement around every 15,000 kilometers. Below is relevant information: 1. Conditions requiring shorter replacement intervals: The actual replacement frequency depends on the vehicle's usage conditions, driving environment, and air quality. In cases of poor environmental conditions, high humidity, excessive dust, or in smog-prone cities, the replacement interval should be appropriately shortened. Similarly, during periods of severe haze or heavy poplar fluff, the replacement cycle should also be reduced. 2. Cabin air filter location: The cabin air filter is generally located behind the glove compartment on the passenger side, though some vehicle models position it beneath the windshield's air deflector channel. Its function is to filter outside air entering the vehicle through the air conditioning system, particularly removing external dust during recirculation mode, with the primary purpose of protecting the vehicle's occupants.
13
2
Share

Where is the sensor located on the BMW 4 Series?

The sensor on the BMW 4 Series is installed at the position where the circulating water returns to the radiator in the engine. Function of the coolant temperature sensor: The function of the coolant temperature sensor is to convert the coolant temperature into an electrical signal and input it to the ECU. It adjusts the fuel injection quantity by increasing it during low temperatures, modifies the ignition timing advance angle by increasing it during low temperatures and delaying it during high temperatures to prevent knocking, and affects the idle control valve. During low temperatures, the ECU controls the idle control valve based on the coolant temperature sensor signal to increase the idle speed. Structure of the coolant temperature sensor: The coolant level and temperature sensor consists of a temperature control section and a water level control section. It is also equipped with a pressure reduction device before the electric valve and a rotary muffler heater for heating.
17
4
Share

What is the center bore distance of the Geely Boyue wheel hub?

Geely Boyue wheel hub center bore distance is 5×114.3. The following is a related introduction to car wheel hubs: Wheel hub materials: Wheel hubs come in various types based on diameter, width, forming method, and materials. The wheel hub is also called the wheel rim. Depending on the characteristics and requirements of different vehicle models, the surface treatment process of the wheel hub will also adopt different methods, which can be roughly divided into two types: painting and electroplating. Wheel hub appearance: For ordinary vehicle models, the appearance of the wheel hub is less considered, with good heat dissipation being a basic requirement. The process basically uses painting treatment, that is, spraying first and then electric baking, which is cost-effective and has bright colors and long-lasting durability. Even if the vehicle is scrapped, the color of the wheel hub remains unchanged.
20
5
Share

What are the hidden features of the Mercedes-Benz E300?

The hidden features of the Mercedes-Benz E300 include: independent unlocking with the car key; automatic tilting of the rearview mirror when reversing; manual transmission mode switching to automatic transmission mode; and using the electronic parking brake in emergency situations. Mercedes-Benz E300 dimensions: The dimensions of the Mercedes-Benz E300 are a length of 5012mm, a width of 1855mm, a height of 1464mm, and a wheelbase of 3014mm. It is a long-wheelbase model, with a wheelbase that is 140mm longer than the prototype vehicle, providing ample space and enhancing the overall ride comfort. Mercedes-Benz E300 interior: The interior design features a dark gray color scheme paired with brown seats, giving it a youthful and premium look. The center console is equipped with a large screen, with the middle section housing audio control buttons and the lower section featuring air conditioning control buttons.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.