What brand are the original tires on the Nissan Sylphy?

2 Answers
LeHolden
07/24/25 6:17am
The original tires on the Nissan Sylphy are Dunlop brand, a mid-range tire that combines quietness and comfort with excellent grip. In actual noise tests, the tires perform as expected. Below is some related information about the Sylphy: Advantages of Dunlop tires: In performance rankings across various tire brands in the market, Dunlop tires are considered quite balanced. In terms of sportiness, Dunlop ranks third. In safety ratings, Dunlop tires also rank third, and they are the most affordable. For wear resistance, Dunlop tires rank third again. In comfort comparisons, Dunlop tires still rank third. Dunlop offers a wide variety of tire types: Depending on your vehicle's needs, Dunlop provides tires with different performance focuses—some prioritize handling, some emphasize durability, and others focus on quietness and comfort.
Was this review help?
11
4
Share
OKathryn
08/11/25 2:01am
I've been driving a Sylphy for several years and found that the original tires are usually Bridgestone or Dunlop, depending on the model year and regional configuration. My 2019 model came with Bridgestones, which had good grip but were a bit noisy. After switching to Michelins, it became much quieter. Actually, OEM choices consider cost and balance, so checking the door frame label or tire sidewall markings is most accurate. Tire lifespan varies by driver—if you do a lot of highway driving, wear will be faster. I recommend checking tire pressure and tread depth every six months. When replacing tires, avoid randomly changing brands as it may affect the suspension system or fuel efficiency. Developing a habit of regular inspections enhances safety and driving comfort.
Was this review help?
20
1
Share
Expand All
More Forum Discussions

What is the reason for the simultaneous illumination of the tire pressure and ABS lights on the Volkswagen Bora?

The reasons for the simultaneous illumination of the tire pressure and ABS lights on the Volkswagen Bora are: 1. Air in the system pipelines; 2. System computer malfunction; 3. Vehicle speed sensor failure; 4. ABS wiring harness breakage. The working principle of the ABS system is: During emergency braking, the highly sensitive wheel speed sensors installed on each wheel detect wheel lock-up, and the computer immediately controls the pressure regulator to release pressure from the wheel's brake caliper, preventing wheel lock-up. The functions of the ABS system are: 1. To prevent loss of vehicle control, increase braking distance, and improve vehicle safety; 2. To enhance the overall braking performance of the vehicle; 3. To prevent wheel lock-up during braking; 4. To ensure the driver can control the direction during braking and prevent rear axle skidding.
7
5
Share

What Causes Steering Column Module Failure?

Detailed causes and solutions for steering column module failure are as follows: Incorrect front wheel alignment: Insufficient tire pressure. Deformation or wear of the steering linkage, overly tight ball joints. Lack of oil in the steering gear, excessive meshing clearance of the steering gear's meshing pair, bearing damage, or excessive preload. It is best to use identical tires, with the minimum requirement that the two tires on the front and rear axles must be the same. Deformation of the safety steering column and flange: Breakage of front coil springs or deformation of the body or frame; bending or deformation of the left and right tie rods, excessive clearance at the hinges. Unequal spring force or excessive deformation of the two front suspension coil springs, requiring professional inspection and repair at a 4S shop. Lack of lubrication in moving parts: Excessive clearance in the ball joints of the tie rods. Lack of lubrication in moving parts. Regularly lubricate the moving parts.
6
4
Share

Why can't the car door be opened from the outside after locking, but can be opened from the inside?

The reasons why the car door cannot be opened from the outside after locking but can be opened from the inside are as follows: Child lock is engaged: You can check if the child lock is engaged. The function of the car child lock is to prevent active and unaware children from opening the door during driving when they are seated in the rear, thereby avoiding danger. In this case, the door can only be opened by an adult from the outside after the car is parked. Triggered the safety mechanism: If the rear door of the car cannot be opened from the inside but can be opened from the outside, it is highly likely that the child lock is in effect. This happens when passengers in the rear seat trigger the safety mechanism while getting in or out of the car. Simply reset it to normal. External handle linkage rod fell off: It is also possible that the linkage rod of the external handle fell off. Just reattach it to function normally. Door opening lever cracked: If the slot for the door opening lever on the external handle is cracked, replacing it will solve the problem.
10
4
Share

Are New Cars Fuel-Efficient or Fuel-Consuming?

During the break-in period of a new car, it may consume more fuel. Break-in period precautions: During the break-in period of a new car, prolonged continuous driving should be avoided to prevent excessive working hours of the engine and chassis components, which would increase wear and directly affect their service life. The vehicle should also avoid operating at full load; typically, within the first 1,000 kilometers, it's best to keep the load below 80% of the rated capacity. Additionally, try to avoid high-speed driving. Within the first 2,000 kilometers, full-throttle speed should not exceed 70% of the maximum speed. Methods to reduce fuel consumption: The longer the idle time when parked, the greater the fuel consumption, so minimize idle parking time. Avoid rapid acceleration, slamming on the throttle, and driving at low RPMs. Factors affecting fuel consumption: Various driving conditions such as acceleration, deceleration, braking, and engine idling, as well as load capacity, ambient temperature, and whether the air conditioning is on, all have an impact.
8
0
Share

How Long Does It Take for a New Car to Be Delivered from the Factory to the 4S Store?

It takes a certain amount of time for a new car to arrive at the store. Generally, after the consumer places an order, the 4S store will make a plan based on the consumer's order and report it to the manufacturer. Once confirmed, the vehicle can be transported, which usually takes at least 10 to 15 days. Confirm the pickup date: The time it takes to pick up a car after purchase can vary greatly, and different vehicles may have different pickup times. Therefore, consumers must negotiate with the salesperson in advance when buying a car, ensuring the salesperson provides an approximate pickup date and includes it in the purchase contract. Only in this way can the smooth pickup of the car be maximally guaranteed. Compensation for delayed delivery: If the 4S store delays the delivery of the car after the consumer places an order and cannot provide a specific delivery time, as long as the delivery date is clearly stated in the purchase contract, the 4S store must complete the delivery within the specified period. Otherwise, the 4S store will be in breach of contract, and the consumer has the right to demand double the deposit as compensation from the 4S store.
9
3
Share

How Many Years Can a Car Be Driven?

The number of years a car can be driven varies by model: 1. Non-commercial passenger vehicles with fewer than 9 seats can be used for 15 years. If they meet the scrapping standards but are required to continue use, no approval is needed, and they can be extended after passing inspection; 2. Tourist passenger vehicles and non-commercial passenger vehicles with 9 or more seats can be used for 10 years. If they meet the scrapping standards but are required to continue use, they can be extended for a maximum of 10 years following current procedures; 3. Tourist passenger vehicles under extended scrapping must undergo 4 annual inspections, while non-commercial passenger vehicles with 9 or more seats under extended scrapping must undergo 2 annual inspections. For vehicles over 15 years old, 4 annual inspections are required starting from the 16th year; 4. The service life of commercial buses is adjusted to 10 years. If they meet the scrapping standards but are required to continue use, they can be extended for up to 4 years following current procedures, with 4 annual inspections during the extended period.
1
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.