What brand are the original tires on the Haval F7x?

1 Answers
CadenDella
07/29/25 1:55pm
Haval F7x's original tires are from the Goodyear brand, with specifications of 255/65R17 102H, 225/55R19 99H, and 225/55R19 99V. The Haval F7x is a compact SUV with body dimensions of 4620mm in length, 1846mm in width, and 1660mm in height, and a wheelbase of 2725mm. In terms of power, the Haval F7x uses two engines: a 1.5-liter turbocharged engine and a 2.0-liter turbocharged engine. The 1.5-liter turbocharged engine in the Haval F7x delivers 169 horsepower and a maximum torque of 285 Nm, paired with a 7-speed dual-clutch transmission.
Was this review help?
13
3
Share
More Forum Discussions

What is the Initial DFC car?

Initial DFC is the colloquial name for the Nissan Skyline GT-R civilian racing car produced in Japan. The correct steps to start the car are: 1. Start the car; 2. Shift the gear to N position; 3. Press the electronic handbrake; 4. Shift the gear to D position; 5. Step on the accelerator. Reasons why the car may not start include: 1. Damage to the fuel supply system, such as clogged low-pressure fuel lines, loose pipes causing fuel leaks, air in high-pressure fuel lines, poor technical condition of the injectors, or incorrect injection timing angle; 2. Insufficient air intake due to a clogged air filter element; 3. Insufficient cylinder compression pressure caused by a damaged cylinder head gasket leaking air, valves not closing tightly and leaking air, or worn piston liners leaking air; 4. Issues with the starting system, such as power supply failure, poor contact in the electromagnetic switch, poor contact between the starter motor commutator and brushes, or slipping clutch in the starter transmission mechanism.
20
0
Share

How to check tire pressure without a tire pressure monitoring system?

Without a tire pressure monitoring system, you can check tire pressure through methods like pressure sensors and visual inspection. The specific methods are introduced as follows: Pressure sensor method: Install a pressure sensor in each tire to directly measure the tire pressure. The pressure information is transmitted wirelessly from inside the tire to a central receiver module, which then displays the pressure data for each tire. The system will automatically alert when the tire pressure is too low or there is a leak. Visual inspection method: Observe the height and flatness between the two tires. Inflated and uninflated tires differ in width and contact area with the ground. An uninflated tire will have a larger contact area than an inflated one. If the steering wheel pulls to one side or the car drifts in a certain direction while driving, it could also indicate abnormal tire pressure due to unequal torque on both sides.
9
3
Share

What is the method to reset the maintenance light on the Roewe RX5 MAX?

The method to reset the maintenance light on the Roewe RX5 MAX is: 1. Turn on the car's power supply and press the toggle button on the right side of the steering wheel; 2. Adjust to the user settings interface, where you can see the maintenance settings option; 3. Select the maintenance settings option and press the OK button to enter the maintenance settings; 4. Press and hold the OK button to reset the oil maintenance mileage and time, completing the maintenance light reset. The Roewe RX5 MAX is equipped with a 1.5T turbocharged engine, with a maximum horsepower of 169 PS, a maximum power of 124 kW, a maximum torque of 250 Nm, and is paired with a 6-speed manual transmission. The Roewe RX5 MAX is a compact SUV with body dimensions of 4647 mm in length, 1891 mm in width, 1725 mm in height, a wheelbase of 2760 mm, a fuel tank capacity of 55 liters, and a curb weight of 1631 kg.
20
5
Share

Is Benda Motorcycle a Domestic or Joint Venture Brand?

Benda motorcycle is a domestic brand. Below is an extended introduction: 1. Introduction to Benda Motorcycle: It is a brand under Changling Benjian Motorcycle Co., Ltd., established in 1994. The Benda brand primarily focuses on cruiser and street bikes, with its products mainly equipped with 250cc to 400cc single-cylinder and multi-cylinder engines. Benda Motorcycle was formerly known as Zhejiang Zhongnan Motorcycle Co., Ltd. The BOX400C is one of Benda's best-selling models. 2. Powertrain: The bike is powered by a twin-cylinder liquid-cooled engine with an actual displacement of 394ml, delivering a maximum power of 28.5KW and a maximum torque of 34 Nm. It is paired with a six-speed transmission and an electronic fuel injection system. Benda brand models are known for their decent craftsmanship, relatively rich basic configurations, and engine technology that can be considered upper-mid level.
11
1
Share

What is the reason for engine oil entering the radiator but the water temperature remains normal?

The reasons for engine oil entering the radiator but the water temperature remaining normal are: 1. White smoke coming from the exhaust pipe; 2. Presence of oil in the radiator. The method for cleaning the radiator is: 1. Start the vehicle to bring it up to normal operating temperature; 2. Slowly open the radiator cap, shake the RF12P well, and add it through the radiator filler port; 3. Let the engine idle for no less than 15 minutes, drain the coolant, and flush the radiator with water until clear water flows out. The function of the car radiator: Absorb heat from the engine block to prevent engine overheating and malfunctions. Precautions for using the car radiator: 1. Prevent the radiator temperature from becoming too high; 2. Regularly replace the coolant; 3. Do not use tap water as a substitute for coolant; 4. Choose high-quality diluted water or antifreeze when selecting radiator fluid; 5. Perform regular anti-rust treatment on the radiator; 6. Address radiator malfunctions promptly to avoid causing other issues by continued use.
6
3
Share

How to Adjust a Hydraulic Steering Gear That's Too Heavy?

Steering wheel becoming heavier is most commonly caused by dirty power steering fluid. Like other automotive fluids, power steering fluid also requires periodic replacement. Below is relevant information about hydraulic steering gears: 1. Structure: The hydraulic steering gear is used to control the action of the steering hydraulic cylinder to achieve hydraulic steering; when the steering hydraulic pump stops supplying oil, it enables manual steering. The hydraulic steering gear is fixed to the steering bracket with screws and consists of a steering valve and a cycloidal gear motor. 2. Function: The hydraulic steering gear serves to amplify the force from the steering wheel's transmission mechanism and change the direction of force transmission. It is widely used in low-speed, heavy-duty vehicles such as agricultural machinery, marine equipment, garden machinery, road maintenance equipment, forestry machinery, construction machinery, and mining machinery. It allows drivers to achieve greater steering control with minimal effort, offering safe and reliable performance along with easy and flexible operation.
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.