What brand are the original tires on the Audi Q5?

2 Answers
Amy
09/03/25 4:20am
Audi Q5's original tires are from Pirelli's EXCELLENCE series, with a tire size of 235/55R19. The Audi Q5 is a mid-size vehicle with a body length, width, and height of 4753mm, 1893mm, and 1655mm respectively, and a wheelbase of 2908mm. The Audi Q5 is equipped with a 2.0TL4 turbocharged engine, delivering a maximum power of 140kw and a maximum power speed of 5000 to 6000rpm. The maximum torque is 320nm, paired with a 7-speed wet dual-clutch transmission. The front suspension of the Audi Q5 is a five-link independent suspension, and the rear suspension is also a five-link independent suspension, with a fuel tank capacity of 73 liters.
Was this review help?
13
3
Share
LeviRose
09/15/25 5:56am
As a car enthusiast, my Audi Q5 originally came with Continental ProContact series tires. These tires perform stably in various road conditions, offering strong grip on wet surfaces which enhances driving safety in rainy weather; they also provide good dry road handling with quick response and smooth operation. Audi chose them because they balance comfort and performance while reducing noise, making them suitable for SUVs' weight and high-speed driving. When replacement is needed, I prioritize the original brand to maintain the vehicle's original handling feel. I also remind myself to check tire pressure and wear cycles, replacing them approximately every 40,000 kilometers to ensure optimal fuel efficiency and driving safety. It's not just about the brand—it's about the detailed design that affects the overall driving experience.
Was this review help?
14
2
Share
Expand All
More Forum Discussions

How to Repair Scratches on Car Plastic Shells?

Methods for dealing with scratches on car plastic shells are as follows: 1. Minor scratches: Use a compound to treat them, wiping in straight lines, then apply wax—first coarse wax, followed by fine wax, moving in the same direction from the inside out. This will remove almost all fine scratches. 2. Scratches without exposed primer: Shake the touch-up paint pen well before use, then apply the primer like nail polish. You can add a certain amount of thinner to the touch-up pen to ensure smooth spraying. Carefully spray the area that needs repair, and once the touch-up paint dries, apply fine wax. 3. Scratches with exposed primer: First, wash and dry the car, then apply rust remover to the scratched area. After 10~15 minutes, wipe off the rust remover with a tissue to prevent further rusting. 4. Dent repair: The tool required for dent repair is a pry bar. It is mainly used to push the dented steel outward from the inside. The technique must be delicate, with slight adjustments being key. Then, use a rubber hammer to tap from the outside inward to restore the overall shape. Finally, use a sharp object like a pencil tip to fine-tune any protruding marks on the car body.
11
5
Share

How to Find Evidence of Odometer Tampering in Used Cars?

Evidence can be determined through maintenance records, insurance company data, and a thorough inspection of the vehicle's wear and tear. Below are methods to assess the wear and tear of a car: 1. Judging by the car's interior: While the odometer can be easily tampered with, the wear on the car's interior is not as easily refreshed. The degree of interior wear is proportional to the mileage the car has traveled. 2. Checking the wear on the steering wheel and pedals: The wear on the steering wheel and pedals can reflect the length of time and frequency of the car's use. These are the parts most frequently in contact with the driver during operation. Even if a steering wheel cover is used, careful observation of details can reveal the extent of wear. 3. Observing the wear on the car's tires: If the wear on the four tires is uneven, it may indicate previous accidents leading to replacements. If all four tires have been replaced, the car's mileage is likely to have exceeded 50,000 kilometers.
19
3
Share

What is the fuel consumption of the 2021 Sylphy?

2021 Sylphy has a fuel consumption of 6-7L per 100 kilometers. Below are the specific details of the Sylphy: 1. Vehicle Positioning: The Sylphy is a mid-size car under Dongfeng Motor Co., Ltd., with dimensions of 4641*1815*1450mm (length*width*height) and a wheelbase of 2712mm. 2. Powertrain: Equipped with a 1.6L naturally aspirated engine that meets the China VI emission standards, delivering a maximum power of 99kW (135 horsepower) and a peak torque of 159Nm. The transmission system is paired with a CVT gearbox. 3. Smart Features: Features the new Nissan-Connect super-intelligent system, including an 8-inch high-definition capacitive touch screen, which supports voice control for online entertainment, navigation, Bluetooth calls, driving recorder, and air conditioning. The remote monitoring and control function allows users to connect seamlessly via a smart app to remotely control door locks, lights & horn, engine, and air conditioning based on specific needs.
14
4
Share

Is a driver's license mandatory for car loans?

You can obtain a car loan without a driver's license, as it is not a requirement. Below is relevant information about car loans: 1. Conditions for car loans: Possession of a valid ID and full civil capacity; ability to provide proof of fixed and detailed address; stable occupation and capability to repay the loan principal and interest on schedule; good personal social credit; holding a car purchase contract or agreement approved by the lender; other conditions stipulated by cooperative institutions. 2. Car loan application process: Customer application. The customer submits an application to the bank, fills out the application form in writing, and provides relevant documents; signing the contract. After the bank reviews and approves the documents submitted by the borrower, both parties sign the loan contract and guarantee contract, and complete relevant notarization and mortgage registration procedures as needed; loan disbursement. Once the loan is approved by the bank, all procedures are completed, and the bank transfers the funds directly to the car dealer's account as stipulated in the contract; repayment on schedule. The borrower repays the loan principal and interest according to the repayment plan and method specified in the loan contract; loan settlement. Loan settlement includes normal settlement and early settlement.
16
5
Share

Should the Noisy Engine Water Pump Be Repaired?

Engine water pump with abnormal noise needs to be repaired. The following is relevant information about the engine water pump: 1. Function of the engine water pump: It pumps coolant to make the coolant flow quickly in the engine's cooling water channels, thereby removing the heat generated during engine operation and maintaining the engine's normal working temperature. 2. Working principle of the engine water pump: There is also a thermostat next to the water pump. When the car is just started (cold engine), it does not open, preventing the coolant from passing through the radiator and only circulating within the engine (commonly known as a small circulation). When the engine temperature reaches above 80 degrees, it opens, and the hot water in the engine is pumped into the radiator. The cold air blowing through the radiator while the car is moving carries away the heat.
16
5
Share

Is the Failure of Mercedes-Benz 48V Mild Hybrid System Common?

Mercedes-Benz 48V mild hybrid system failures are indeed common. Below is a detailed introduction to the 48V mild hybrid system: 1. Advantages: The application of the 48V mild hybrid system enables the vehicle to power higher-capacity onboard systems, drive more powerful start-stop motors, and more effortlessly rotate the engine crankshaft to wake up the engine, reducing system operation delays and jerkiness. It can also achieve more functions; some 48V systems can even temporarily take over the air conditioning when the engine is off, supplying power to the air conditioning compressor to prevent it from shutting down. Additionally, the 48V mild hybrid system can reduce energy consumption and emissions by approximately 15-20%. 2. Disadvantages: If the voltage is too high, issues such as high-voltage circuit protection, electromagnetic compatibility, and the stability of the onboard electrical system need to be considered.
16
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.