What brand are the original tires for the Volkswagen Sagitar?

1 Answers
DiAubrey
07/29/25 5:07pm
Original tires are from Kumho and Hankook brands. Below is the relevant introduction: Tire functions: Support the entire weight of the vehicle, bear the load of the car, and transmit forces and moments in other directions. Transmit traction and braking torque, ensure good adhesion between the wheels and the road surface to improve the car's power, braking, and passability, and together with the car suspension, mitigate the impact received during driving and attenuate the resulting vibrations. Prevent severe vibrations and early damage to car components, adapt to the vehicle's high-speed performance, reduce driving noise, and ensure driving safety, handling stability, comfort, and energy efficiency. Precautions: Before driving, check tire pressure and tread condition for damage. Avoid overloading, especially during high-speed driving, as a tire blowout can cause the vehicle to lose control, which is very dangerous.
Was this review help?
3
1
Share
More Forum Discussions

What is the difference between AT and AMT?

AT and AMT differ in the following aspects: 1. Different transmission types: AT stands for automatic transmission; AMT stands for automated manual transmission. 2. Different components: AT consists of a clutch, hydraulic automatic shift control system, planetary gear transmission, electronic control system, cooling system, oil filter device, and oil pump; AMT is composed of a dry clutch, gear transmission, and microcomputer-controlled automatic shifting system. 3. Different functions: AT does not require a clutch for gear shifting; AMT achieves gear shifting through an added microcomputer control system that automatically operates the system. 4. Different efficiencies: AT requires a torque converter for power transmission, and its components operate immersed in oil, which creates a certain resistance, affecting efficiency; AMT is a mechanical automatic transmission with less power loss and no oil resistance, resulting in higher power transmission efficiency.
15
0
Share

How to turn on the high beams of an Audi A6?

Audi A6 turns on the high beams by rotating the knob on the left side of the steering wheel to the auto position to turn on the low beams, then pushing it downward to activate the high beams. Taking the 2021 Audi A6 as an example, it belongs to the mid-to-large-sized car category, with body dimensions of: length 5038mm, width 1886mm, height 1475mm, wheelbase 3024mm, fuel tank capacity 73l, and curb weight 1800kg. The 2021 Audi A6 features a five-link independent suspension in the front and rear, and is equipped with a 2.0l turbocharged engine, delivering a maximum horsepower of 190ps, maximum power of 140kw, maximum torque of 320nm, paired with a 7-speed dual-clutch transmission.
4
1
Share

Can the first maintenance at three months be postponed for a few days?

It is not advisable to postpone the first maintenance of a car. Below is some information regarding the first maintenance of a car: 1. The first maintenance of a car refers to its initial service, which is typically scheduled at 5,000 kilometers or 6 months, with the count starting from the date of vehicle delivery. 2. There are two indicators for the first maintenance: mileage and time. Whichever comes first will determine the maintenance schedule. Delaying the first maintenance means forfeiting your warranty rights, and if overdue, it will not just be a matter of paying out of pocket. 3. Before the first maintenance, it is advisable to note any issues with your car and inform the service staff at the 4S shop. Before servicing, refer to the user manual to understand the general scope of the maintenance. Most first maintenance services involve changing the engine oil and oil filter.
12
4
Share

What is the solution for a locked steering wheel?

The solution for a locked steering wheel is: insert the key and gently turn the steering wheel clockwise or counterclockwise. The steering wheel is a wheel-shaped device used to control the direction of cars, ships, and airplanes. Its function is to convert the force applied by the driver to the edge of the steering wheel into torque, which is then transmitted to the steering shaft. It mainly consists of a skeleton, foam, and the main driver's airbag. The working principle of a steering wheel lock: The steering wheel lock is a mechanical lock composed of a lock handle, lock base, and lock rod. Its shell is installed on the lock handle, and one end of the lock handle is equipped with a lock rod. When in use, the positioning fork and hook of the steering wheel lock are clamped onto the steering wheel rim to restrict the rotation of the steering wheel, achieving an anti-theft effect.
5
1
Share

What is the replacement method for auto start-stop batteries?

The replacement method for auto start-stop batteries is: 1. Prepare a backup battery for jump-start connection to prevent vehicle circuit power failure; 2. Remove the old battery and replace it with a new one. The characteristics of auto start-stop are: 1. The engine can automatically shut off, reducing fuel consumption and emissions; 2. After the engine shuts off, the power supply can replace the pulley to provide operating power for the engine cooling fan and in-car air conditioning. Precautions for using auto start-stop are: 1. Quickly shift to P gear and release the brake when the engine stops; 2. Reduce current consumption; 3. Do not repeatedly press the brake when the engine is off; 4. Let the engine speed drop to zero, engage the starter gear before restarting; 5. Do not activate the auto start-stop system during low-speed parking or when using air conditioning.
6
2
Share

What is the working principle of continuously variable transmission?

The working principle of continuously variable transmission is: using a hydraulic torque converter to generate torques of different strengths, thereby transmitting torque to achieve continuously variable transmission. Types of continuously variable transmissions: 1. Mechanical: There are various forms, the most common being the cone-block metal V-belt type transmission, used in automobiles; 2. Hydraulic transmission type: used in engineering vehicles and agricultural machinery; 3. Electric type: used in electric vehicles. Starting devices for automotive continuously variable transmissions include: 1. Electromagnetic clutch type: large in mass and size, with low thermal load capacity; 2. Electronically controlled wet friction plate type: small in structural size, fast in response, and with low energy loss; 3. Hydraulic torque converter type: large starting torque, good hill-start performance, easy driving, good driving performance, and capable of reducing vibration and impact caused by uneven engine torque.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.