···
Log in / Register

What brand are the original spark plugs for the Roewe RX5?

4 Answers
OMaximus
07/28/25 2:48pm
The original spark plugs for the Roewe RX5 are platinum electrode. The function of the spark plug is to introduce the high voltage electricity generated by the ignition coil into the engine cylinder, generating a spark between the spark plug electrodes to ignite the air-fuel mixture, enabling the engine to operate. Taking the 2020 Roewe RX5 Luxury Edition as an example, its body dimensions are: length 4571mm, width 1855mm, height 1719mm, with a wheelbase of 2708mm. The 2020 Roewe RX5 Luxury Edition features a MacPherson independent front suspension and a longitudinal trailing arm semi-independent rear suspension. It is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 173PS, maximum power of 127kW, and maximum torque of 275Nm, paired with a 6-speed manual transmission.
Was this review help?
3
3
Share
EdenLee
08/11/25 7:16pm
I previously drove a Roewe RX5 for several years, and its original spark plugs were from the NGK brand. I personally replaced them a few times and found them quite durable, generally requiring inspection every 20,000 kilometers. NGK products offer stable quality and high ignition efficiency, ensuring smooth engine starts and fuel efficiency. If not replaced for a long time, issues like sluggish acceleration or a sudden increase in fuel consumption may arise. As a car owner, I recommend sticking to the original brand because it matches the vehicle's design, reducing potential compatibility issues. Additionally, during routine maintenance, you can simply check whether the spark plug electrodes are carbon-fouled to determine if replacement is needed. Keeping up with this can help your car run longer and save money. In short, don’t overlook these small details—safe driving starts with good spark plugs.
Was this review help?
10
0
Share
Expand All
JanelleFitz
09/29/25 4:14am
In my work, I often encounter Roewe RX5 owners coming in for spark plug repairs, with the original models mostly being from the NGK brand, known for their fine craftsmanship and durability. When replacing spark plugs, common issues include electrode erosion or carbon buildup causing ignition difficulties, which affect acceleration performance. As a professional, I recommend regular inspections and replacements approximately every 20,000 kilometers. Using the original brand can prevent circuit mismatch risks and ensure the ignition system remains stable and reliable. It's important to note that the condition of spark plugs directly impacts fuel consumption and emission efficiency. Neglecting minor issues may lead to major problems, making timely maintenance crucial.
Was this review help?
6
4
Share
Expand All
Brian
11/12/25 6:10am
The original spark plugs in my Roewe RX5 are from NGK, and after several years of use, they've proven to be very reliable, offering quick ignition response and fuel efficiency. I've tried replacing them myself—the steps are straightforward and don't require professional tools, but be sure to choose the same brand to avoid performance degradation. Regular maintenance ensures smooth engine operation and extends its lifespan, which significantly impacts daily driving.
Was this review help?
19
4
Share
Expand All
More Forum Discussions

How is the power performance of the Corolla Hybrid?

Corolla Hybrid adopts the new-generation THS II hybrid system with a 1.8L Atkinson cycle engine. Below are the relevant specifications: 1. Maximum Power: The maximum power output is 98 horsepower at 5,200 rpm, with peak torque of 142 Nm at 3,600 rpm. 2. High-Speed Electric Motor: The compact, lightweight high-speed electric motor delivers maximum power of 53 kW (72 horsepower) and peak torque of 163 Nm. Extended information about the performance: 1. Performance: The Corolla Hybrid's naturally aspirated engine and electric motor work in perfect harmony, offering exceptional smoothness. The electric motor assistance also optimizes power response, making throttle input more intuitive and creating a relaxed driving atmosphere. 2. Power: Compared to conventional 1.5L models, the Corolla Hybrid's acceleration time from 0-100 km/h is slightly over 11 seconds.
2
2
Share

How Often Should Motorcycle Gear Oil Be Changed?

Motorcycle gear oil should be changed every 6,000 to 10,000 kilometers. Below is an introduction to related content: 1. Function: Gear oil primarily serves to lubricate gears and bearings, prevent wear and rust, and assist in dissipating heat from the gears. 2. Motorcycle Tire Pressure Standards: Front wheel pressure: 170 kPa; rear wheel pressure: 200 to 220 kPa. Below is extended information on the effects of insufficient motorcycle tire pressure: 1. Distance: Significant reduction in coasting distance. 2. Effect: Weakened coasting effect on downhill sections. 3. Flat Ground: Difficulty felt when pushing the vehicle on flat ground. 4. Wear: Severe tire wear. 5. Tires: Causes premature tire damage. 6. Blowouts: Generates excessive heat during long-distance travel, increasing the risk of blowouts.
1
2
Share

What Type of Engine Oil is Suitable for Cars in Winter?

Winter engine oil models typically have a multi-grade viscosity of 5W-30. Below is a partial introduction to winter engine oil models: 1. State: In winter, temperatures are low, and conventional engine oil may turn into a semi-solid, semi-fluid state, reducing its flowability. Poor-quality oil might even stop flowing entirely. 2. Viscosity: It is best to choose engine oil with low base oil viscosity, a low pour point, and strong anti-wear performance. Most car owners in China opt for multi-grade viscosity oils like 5W-30 or 10W-40. The number before the 'W' in the oil grade represents the oil's low-temperature flowability.
14
5
Share

How to Determine the Turning Distance While Driving

To judge the turning distance while driving, you need to estimate the distance between the front of the car and a person. Taking a sedan as an example, assume there is a person ahead who is about 1.7 to 1.8 meters tall, with their feet at approximately 10 cm, knees at around 45 cm, and hips at about 70 cm. Here are some tips for turning while driving: 1. Follow the outside-inside-outside principle for steering: If you want to pass through a curve quickly and minimize centrifugal force during the turn, make full use of the road width by steering in a large arc to approximate a straight line. 2. Release the throttle and downshift when approaching an uphill curve: Accelerate quickly out of the uphill curve after entering. Before entering the curve, release the throttle to allow the vehicle to enter the curve at a higher speed along the outer side, then downshift to first or second gear. Next, choose your path and correct the direction while gently pressing the throttle.
17
2
Share

What Causes the Abnormal Noise When a BMW 3 Series Goes Over Bumpy Roads?

The main reasons for abnormal noise when a BMW 3 Series goes over bumpy roads are as follows: 1. Body noise: This is usually caused by insufficient body rigidity, leading to deformation of the vehicle while driving, friction or shaking between the doors and the frame, or friction between steel plates due to some areas being unwelded. Applying adhesive strips on the doors and windows or placing rubber pads in the friction areas may help reduce or eliminate the noise. 2. Engine compartment noise: There are many possible causes for noise here. A high-pitched belt squeal is generally caused by belt slippage. If there is a sound of dry metal friction outside the engine while it is running, it is usually a sign of damage to the generator, water pump, or power steering pump bearings. 3. Suspension noise: If there is a 'thud' or 'click' sound near the four wheels when encountering bumps, it is mostly due to shock absorber issues or loose suspension components. Be sure to have it thoroughly inspected at a professional repair shop. Suspension components are not only related to ride comfort but also to driving safety, so they should never be overlooked.
17
0
Share

How Many Horsepower is 100 Pi?

Horsepower generally refers to metric horsepower, where 1 horsepower = 1 pi = 0.735 kW. Therefore, 100 horsepower equals 73.5 kW, which is also the maximum power output of a car. Below is an introduction to related content: 1. Family Cars: Most family car engines can achieve 100 horsepower, which is not particularly high. 2. Performance Indicator: Horsepower is a parameter used to measure engine performance, and it can be converted into power. Power is an indicator that measures how much work an engine can perform per unit of time. Horsepower is a commonly used unit for measuring power in engineering. It typically refers to metric horsepower rather than imperial horsepower. By definition, 1 metric horsepower is the power required to perform 75 kilogram-force·meters of work in 1 second.
20
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.