···
Log in / Register

What brand are the original brake pads for the Buick Excelle?

6Answers
AaronFitz
07/29/2025, 10:48:01 PM

The original brake pads for the Buick Excelle GT are produced in Italy and bear the GM logo. It's important to note that when purchasing brake pads, you should inform the seller of your vehicle's production year and model configuration, as the brake pad models differ between high and low trim levels to avoid purchasing incompatible products. In addition to choosing original brake pads, you can also opt for brands like Bosch, Ferodo, or Textar. Below are specific details about the Excelle: 1. Vehicle Positioning: The Buick Excelle is a compact car under the Buick brand, with dimensions of 4609mm in length, 1798mm in width, 1464mm in height, and a wheelbase of 2640mm. 2. Powertrain: The Buick Excelle's 1.3-liter turbocharged engine delivers a maximum power of 120kW and a maximum torque of 230Nm, with the maximum power achieved at 5500 rpm and the maximum torque available between 1800 to 4400 rpm.

Was this review help?
111
Share
SilasFitz
08/16/2025, 05:05:42 AM

I remember driving a Buick Excelle for over a decade. The original brake pads were usually from Bosch or TRW, both of which are major brands often supplied to Buick. Last time I replaced them myself, I confirmed at the 4S店 that TRW was indeed used—they’re solid in quality, providing stable pedal feel and low noise during braking. However, with prolonged use, wear should be checked every 30,000 km or so. If they’re worn too thin, safety could be compromised. I recommend having a technician measure the thickness during every 20,000-km maintenance. Don’t just opt for cheaper aftermarket parts; original ones are better matched to the braking system, reducing the risk of brake failure. Avoid sudden braking in daily driving to extend their lifespan and save on repair costs.

Was this review help?
8
Share
Expand All
Freddy
10/21/2025, 04:18:08 AM

As a frequent car repairer, I can tell you that most OEM brake pads are supplied by Bosch or TRW. The Buick Excelle uses these reliable suppliers. They are manufactured to strict standards, offering excellent wear resistance and low thermal fade, ensuring even braking force during emergency stops. Why do OEMs choose these? Deep brand collaborations ensure safety and driving experience. When replacing, always look for the OEM part number—avoid aftermarket parts that may cause noise or braking delays. I recommend checking brake discs and pads every 20,000 km and replacing them if worn beyond limits—safety first. Also, keep your maintenance records properly; this detail can be lifesaving in critical moments.

Was this review help?
8
Share
Expand All
StJameson
12/04/2025, 03:45:39 AM

When I first bought my Excelle, I was particularly curious about the original equipment parts. After researching online, I learned that the brake pads are mostly from Bosch or TRW, which are quite reputable brands, like OEM partners. As a beginner, I found the original replacements to be quite good, with quick braking response and quiet operation. The maintenance manual recommends regular inspections, otherwise there could be significant safety risks.

Was this review help?
2
Share
Expand All
TeaganAnn
01/24/2026, 10:21:06 PM

Driving the Buick Excelle on the road, brake pads are a major safety concern. The original equipment mostly uses quality products like TRW or Bosch. From a professional perspective, their material formulations are excellent, suitable for high-temperature and high-load braking scenarios. I remind everyone to visually check the thickness monthly; replace them immediately if below 3mm—don't wait until frequent squealing occurs. Choosing original parts ensures factory matching, reducing accident risks—life outweighs any small savings. Developing good driving habits, such as gentle braking and fewer sudden stops, can significantly extend their lifespan and be more environmentally friendly.

Was this review help?
13
Share
Expand All
ElisaLynn
04/20/2026, 04:05:47 AM

Original brake pads like Bosch, though slightly more expensive, are more durable and can last thousands of kilometers longer than aftermarket ones. As a cost-conscious driver, I choose original parts for my Buick Excelle because of their stable quality and reliability. During subsequent maintenance, remember to change the brake fluid every two years to avoid system contamination. Overall, the initial investment in safety is worthwhile—don't compromise safety for a lower price.

Was this review help?
15
Share
Expand All
More Q&A

How to Remove the Spare Tire of the New Buick GL8?

Buick GL8's spare tire is installed under the trunk. After opening the trunk lid, take out the removal tool, insert the dedicated tire removal tool into the round hole and rotate it counterclockwise to remove the spare tire. The types of spare tires are introduced as follows: 1. Full-size spare tire: The specifications of a full-size spare tire are exactly the same as the other four tires on the vehicle, and it can replace any temporarily or permanently unusable tire. 2. Non-full-size spare tire: The diameter and width of this spare tire are slightly smaller than the other four tires, so it can only be used as a temporary replacement and must be used on non-driving wheels, with a maximum speed not exceeding 80km/h. 3. Run-flat tire: Also known as a safety tire (run-flat tire), it is directly translated as "tire that can run without air" in the industry. Compared with ordinary tires, run-flat tires will not leak air or leak very slowly after being punctured, maintaining the driving profile, and the tire bead can always be fixed on the wheel rim, ensuring that the car can drive stably to the repair station for a long time or temporarily. Therefore, cars equipped with such tires no longer need to carry a spare tire, thus invisibly hiding the spare tire in another way on the four tires.
117
Share

What are the Functions and Principles of a Transfer Case?

The following introduces the functions of a transfer case: 1. It can transmit power to the rear axle. 2. It can simultaneously transmit power to both the front and rear axles. 3. It serves as a power distribution device for the engine. The following explains the principles of a transfer case: 1. It achieves disconnection and connection through two sets of gears. 2. Its structure and principle are similar to the primary and secondary shafts of a gearbox. 3. The shift operation of part-time four-wheel drive is realized through the transfer case. The development of transfer cases spans five generations, with specific characteristics as follows: 1. First generation: Transfer cases were mostly split structures, featuring straight-cut gear transmission, dual shift shaft operation, and cast iron housing. 2. Second generation: Transfer cases remained split structures but were upgraded to full helical gear transmission, single shift shaft operation, and aluminum alloy housing, improving transmission efficiency, simplifying shifting, and reducing noise and fuel consumption to some extent. 3. Third generation: Transfer cases incorporated synchronizers, enabling multi-axle drive vehicles to shift while moving. 4. Fourth generation: Major changes included adopting a unitary structure and planetary gear plus chain drive, optimizing shifting and significantly enhancing transmission efficiency and performance. 5. Fifth generation: Transfer cases feature die-cast aluminum alloy housing, toothed chain drive output, and planetary helical gear mechanism for low gear ranges, offering lightweight reliability, high transmission efficiency, simple operation, compact structure, and lower noise.
108
Share

What transmission does the Soueast A5 Wing Dance use?

Soueast A5 Wing Dance is equipped with a CVT continuously variable transmission and a 5-speed manual transmission. This CVT transmission is produced by Nanjing Punch, featuring an S mode and the ability to simulate 8 forward gears, delivering a linear and smooth driving experience. Below is a related introduction to the Soueast A5 Wing Dance: 1. In terms of interior configuration, the Soueast A5 Wing Dance adopts a color scheme with light upper and dark lower sections, and the front of the passenger seat features a distinctive decorative panel. The new car is equipped with a 9-inch floating LCD screen, supporting functions such as navigation and music. Additionally, the car offers configurations like automatic air conditioning and a digital instrument panel. Depending on the configuration, the new car also comes with a sunroof, rearview camera, keyless entry, and differentiated side skirts, wheels, chrome door handles, and window trims. 2. In terms of exterior design, the Soueast A5 Wing Dance adopts the brand's new 'Wing Cube' design concept, with a particularly striking 'Eagle Strike' sporty front face. The winged design on both sides of the logo is a family characteristic of Soueast, and the A5 Wing Dance integrates the upper and lower parts together. The large X-shaped front grille, combined with a full silver treatment, enhances the overall visual impact, making the front look more personalized and aggressive. The rear of the new car follows a minimalist style, with refined taillight clusters and a hidden exhaust layout, presenting an artistic beauty of blank space.
101
Share

How to reset the tire pressure monitoring on Roewe RX5?

With the Roewe RX5 parked and the engine running, press the damping button on the left side of the steering wheel and then scroll down. There will be a tire pressure reset option. Select this reset option and press the button. Wait for the prompt indicating successful tire pressure reset, and the reset will be completed once prompted. Tire Pressure Reset: Tire pressure reset is the operation of resetting the tire pressure monitoring system after addressing a tire pressure fault. Tire Pressure Reset Method: First, turn on the ignition switch, then press and hold the tire pressure monitoring reset button. Release the button after hearing a "beep" sound. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the fault light on the dashboard will turn off, indicating the completion of the tire pressure reset.
115
Share

What is the function of the X-Trail differential?

The function of the X-Trail differential is to meet the requirement of different rotational speeds for the two wheels. The automotive differential enables the left and right (or front and rear) drive wheels to rotate at different speeds. Below are the maintenance methods for the differential: 1. Clean the differential parts and inspect them for wear, replacing excessively worn parts promptly; 2. Check the coaxiality between the outer machined surface of the bearing seat ring and the bearing seat hole, which should be within 0.05mm; 3. Check the coaxiality between the outer machined surface of the bearing seat ring and the oil seal, which should be within 0.05mm; 4. Check the coaxiality between the threads on the bearing seat ring and the housing hole, which should be within 0.27mm, and ensure it is perpendicular to the pinion shaft hole. Additionally, check the perpendicularity from the center line of the pinion shaft hole at 254mm, which should be within 0.08mm.
107
Share

Can You Stop Directly in Third Gear?

You can stop directly in third gear. Below is a detailed introduction about car gears: Speed range: First gear corresponds to a speed of 0-5 km/h. Second gear corresponds to 5-20 km/h, third gear to 20-40 km/h, fourth gear to 40-60 km/h, and fifth gear to 60-100 km/h. Gear shifting timing: For most cars, the ideal shifting point is when the engine reaches 2000 r/min, and should not exceed 2500 r/min. For some high-displacement, high-power engines, shifting can be done around 3000 r/min.
103
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.