What brand are the brake pads for the Volvo S90?

Why does the multifunction steering wheel of the Mercedes-Benz E260L fail?

In most cases, the malfunction of the multifunction steering wheel buttons is due to poor performance or loose connections of the spiral cable located beneath the steering wheel. Additionally, improper use can lead to button damage and subsequent failure. Functional faults: Generally, the multifunction steering wheel in vehicles includes controls for multimedia volume adjustment, Bluetooth phone calls, and multimedia track navigation. If these functions fail or behave abnormally, you can manually operate the corresponding multimedia buttons on the center console or the touchscreen to verify whether it is a functional fault. Mechanical faults: Buttons are consumable components that wear out over time, leading to a shortened lifespan. It cannot be ruled out that functional failures and uncontrollable quality issues may arise due to poor quality, unreasonable design, or immature manufacturing processes.

2

0

Share

Are the diamond-shaped dashed lines on the road a warning to slow down ahead?

The diamond-shaped dashed lines on the road are technically called 'longitudinal deceleration markings for vehicle lanes'. These markings consist of a series of diamond-shaped dashed lines parallel to the lane dividing lines, serving as a warning to drivers that they should slow down in this lane. Below are specific details: 1. The specific shape of longitudinal deceleration markings for vehicle lanes: These markings are a series of diamond-shaped dashed lines parallel to the lane dividing lines. At the starting position of these markings, there is a 30-meter transition section where the diamond-shaped dashed lines gradually widen from 10 cm to 30 cm. This is one of the new markings added in the latest national standard for road traffic markings (GB5768.2-2009). 2. Precautions: When vehicles pass through sections with longitudinal deceleration markings for vehicle lanes, drivers will visually perceive the lane as gradually narrowing, which prompts them to increase their attention, actively take deceleration measures, and proceed slowly. This can effectively prevent drivers from applying emergency brakes just before the stop line.

12

4

Share

How to Remove the Battery from a Skoda Key?

Open one corner of the battery cover, apply force in the direction of the arrow, then open the other corner of the battery cover to lift it off and remove the battery. Related information is as follows: 1. Keyless Entry: The car smart key is a common keyless entry system, also known as an intelligent key system. It consists of a transmitter, a remote central locking control module, a driving authorization system control module, three receivers, and related wiring harnesses. The remote control and transmitter are integrated into the car key. The vehicle can enter a locked or unlocked state based on signals from the smart key and can even automatically close the windows and sunroof. 2. Function: This smart key can emit infrared signals to open one or two doors, the trunk, and the fuel filler cap, as well as operate the car's windows and sunroof. More advanced smart keys resemble a credit card. When the driver touches the door handle, the central locking control system activates and emits a wireless query signal. After the smart key card responds correctly, the car lock automatically opens. The engine will only start when the central processor detects the key card inside the car.

19

2

Share

What is the weight of the Jetour X70 Plus body?

The Jetour X70 Plus body weighs approximately 1.6 tons. The Jetour X70 Plus is a mid-size SUV under the Jetour brand, with dimensions of 4749mm in length, 1900mm in width, and 1720mm in height, and a wheelbase of 2745mm. The Jetour X70 Plus is equipped with two types of engines: a 1.5-liter turbocharged engine and a 1.6-liter turbocharged engine. Below are the details of these two engines: 1.5-liter turbocharged engine: The 1.5-liter turbocharged engine has a maximum power of 115kW, with a maximum power speed of 230Nm, a maximum power speed of 5500 rpm, and a maximum torque speed ranging from 1750 to 4000 rpm. This engine is equipped with DVVT technology and multi-point fuel injection technology, and uses an aluminum alloy cylinder head and block. 1.6-liter turbocharged engine: The 1.6-liter turbocharged engine has a maximum power of 145kW, with a maximum power speed of 5500 rpm, a maximum torque speed of 290Nm, and a maximum torque speed ranging from 2000 to 4000 rpm. This engine is equipped with DVVT technology and direct fuel injection technology, and uses an aluminum alloy cylinder head and block.

12

4

Share

Can You Continue Driving with a Shaking Steering Wheel?

If you can feel significant shaking in the car's steering wheel, you can still continue driving as long as the warning light is not on, but you should drive at a lower speed and go to a repair shop as soon as possible to identify the cause of the shaking. If the shaking is particularly severe, accompanied by unusual noises and the warning light is on, you should stop immediately and call for assistance. Below are some common reasons for steering wheel shaking: 1. Excessive braking force: Frequent and hard braking can overheat the brake discs and pads, causing them to deform when cooled, leading to steering wheel shaking. This issue is usually resolved after replacing the brake discs and pads. 2. Worn or loose tie rod ends or detached rubber bushings: Irregular tire wear can result from this issue, and the car should be taken to a professional repair shop for inspection and replacement of damaged parts. 3. Twisted or deformed drive shaft: Loose or rusted universal joints on the drive shaft can cause shaking. Since these components are located under the car, they are often overlooked during maintenance. Therefore, during every maintenance session, try to have the staff apply grease to the lubricatable parts.

13

4

Share

Why do other people's black cars look so shiny?

The main reason is that the owners of such cars pay great attention to the maintenance and detailing of their vehicles. Here are the relevant explanations: 1. Glaze sealing: Glaze sealing is essentially similar to waxing, but the wax composition is purer than natural mineral wax, with stronger adhesion and higher smoothness. The advantages of glaze sealing include long-lasting protection, up to 6 to 8 months, providing substantial protection to the paint surface and making the car paint feel delicate and smooth. However, the protection period is shorter than that of coating, and the hardness is not as good as coating. 2. Crystal coating: This involves using inorganic substances such as silicon dioxide to form an isolation layer on the surface through the action of molecular polymers. The isolation layer has functions such as UV resistance, oil resistance, low surface energy, and hydrophobicity, thereby protecting the paint surface. The advantages of crystal coating include that when external forces exceed the elastic protection range of the crystal, only scratches are left on the crystal without damaging the paint surface. Crystal coating is corrosion-resistant, isolating the paint surface from the external environment, effectively preventing oxidation, and resisting corrosion from bird droppings, insect fluids, acid rain, etc. It also makes the car look shinier. Crystal coating can last for 1-2 years.

7

1

Share

What brand are the brake pads for the Volvo S90?

Why does the multifunction steering wheel of the Mercedes-Benz E260L fail?

Are the diamond-shaped dashed lines on the road a warning to slow down ahead?

How to Remove the Battery from a Skoda Key?

What is the weight of the Jetour X70 Plus body?

Can You Continue Driving with a Shaking Steering Wheel?

Why do other people's black cars look so shiny?

Where is the OBD interface located in the Sunny?

Why do you need to pull the handbrake for 3 seconds when starting on a slope?

Which is the most expensive Kia car model?

What are the dimensions of the CT6?