What battery model does the Baojun 510 use?

Does the Haval car overflow tank need to be filled with water?

The car overflow tank is equivalent to the car's auxiliary water tank, also known as the coolant replenishment tank. Since it is connected to the car's radiator, the overflow tank should also be filled with antifreeze. In case of emergency, distilled water can be used as a temporary solution. Below is relevant content. Common causes of car antifreeze leakage: The first cause of coolant leakage is radiator damage, with poor sealing of the upper and lower water chambers. The second reason is loose connections and poor sealing at the overflow tank, water pump joint surface, and cooling system pipeline connections. The third reason is damage to the cylinder head gasket, excessive flatness deviation or warping of the cylinder head and block joint surface, and loose cylinder head bolts, which allow high-temperature and high-pressure gas from the cylinder to enter the cooling system, causing excessive coolant consumption. Features of the overflow tank include: A tank body, which has a containment cavity and an inlet and outlet respectively connected to the containment cavity; And a partition plate, horizontally placed inside the tank body to suppress the up-and-down movement of the coolant in the containment cavity.

20

3

Share

Does the Audi Q5 have a rollover prevention system?

The Audi Q5 does not have a rollover prevention system. Function of the Rollover Stability System: The rollover stability system is a device that prevents vehicle rollover. It monitors the vehicle's side-slip speed when turning on off-road surfaces, calculates the degree of vehicle roll using signals from wheel sensors, and applies additional control to the outer wheels in a turn. If the vehicle experiences severe roll at any point, the system quickly adjusts the braking force distribution between the wheels and reduces engine torque output to restore balance in the shortest time possible, minimizing the risk of rollover and ensuring the safety of the vehicle's occupants. Working Principle of the Rollover Stability System: The RSC (Roll Stability Control) system uses a gyroscopic sensor. When the driver makes sharp turns or quick maneuvers, the system automatically records the rate of change in the vehicle's tilt angle. Based on this rate, it calculates the final tilt angle to determine the risk of rollover. If a rollover risk is detected, the system activates the braking system to stabilize the vehicle, giving the driver time to calmly handle the situation.

11

0

Share

Why is it difficult to open the front door of Lavida from the inside?

Solution: If the rear door of the car is difficult to open, it may be due to deformation or breakage of the pull wire inside the door handle. In this case, you need to go to a 4S shop to replace or reset the pull wire of the door handle. It could also be caused by internal rust or corrosion, in which case you should spray rust inhibitor or go to a 4S shop for repair. The specific reasons for the difficulty in opening the rear door of Lavida are as follows. Reasons related to the door handle: Some current vehicles may have door handles installed that rely on pull wires, such as the Bora, older Sagitar, and older Lavida models. If the pull wire is not properly positioned, it can make opening and closing the door more difficult. Reasons related to lubrication of the door lock pillar and door lock: It may be due to significant friction between the door handle lock and the lock pillar, making it harder to open and close the door. Prolonged use can lead to poor lubrication, resulting in difficulty in opening the door.

15

4

Share

What Causes the Hissing Sound in a Volkswagen Engine at Idle?

Volkswagen engine has a hissing sound at idle for the following reasons: Worn Balance Shaft: The balance shaft is used to reduce vibrations generated during engine operation. If the oil passage of the balance shaft is blocked, it will increase wear on the shaft neck and bearings, leading to a hissing sound. Use of Inferior Engine Oil: If the vehicle is filled with inferior engine oil, excessive sludge can form and block the lubrication oil passages, preventing the oil from reaching components that require lubrication and cooling. This can cause wear on the camshaft, crankshaft, and connecting rod bearings, resulting in abnormal noises. Increased Timing Variable Wheel Clearance: If the internal rotor of the variable timing wheel is stuck or the oil chamber is worn, it will lead to increased clearance and abnormal noises. Excessive Valve Clearance: The rocker arm is the lever mechanism that presses the valve, and the size of the valve clearance is mainly controlled by the hydraulic lifter. Damage to either component will cause valve noise.

12

0

Share

What does the front of the Geely Binyue look like?

As the first SUV model under Geely's BMA architecture, the Binyue exudes a highly fashionable and sporty design. Its front grille features a smoked black treatment and incorporates an all-new black logo. The waistline extends from the front fender all the way to the rear, creating a muscular appearance. The floating roof gently slopes downward to connect with the rear spoiler, resembling a lion ready to pounce. Binyue's body dimensions: The Binyue measures 4330x1800x1609mm in length, width, and height, with a wheelbase of 2600mm. Geely Binyue's powertrain: The Binyue is equipped with 1.0T and 1.5T engines, both being three-cylinder units. The 1.0T engine delivers a maximum power of 100KW and peak torque of 205Nm, paired with a 6-speed manual transmission exclusively available on the entry-level model. All other variants come with the 1.5T engine, which produces 130KW maximum power and 255Nm peak torque, mated to a 7-speed dual-clutch transmission, achieving 0-100km/h acceleration in just 7.9 seconds.

7

2

Share

At what tire pressure level should the Haval F7 not be driven?

Haval F7 should not be driven when the tire pressure is below 1.7 bar. The optimal tire pressure should be maintained between 2.3-2.5 bar. Hazards of low tire pressure: The tires become softer, increasing the friction coefficient between the tires and the road surface, leading to higher fuel consumption. The part of the tire in contact with the ground deforms significantly, which over time can cause fatigue in the tire rubber and internal cord layers, affecting the tire's service life. It can also result in a heavy steering wheel and abnormal pulling, among other factors detrimental to driving safety. Hazards of excessive tire pressure: Vibration and pulling of the steering wheel, reduced ride comfort, decreased tire friction and adhesion, affecting braking performance. It accelerates localized wear on the central tread pattern of the tire, reducing the tire's lifespan.

7

2

Share

What battery model does the Baojun 510 use?

Does the Haval car overflow tank need to be filled with water?

Does the Audi Q5 have a rollover prevention system?

Why is it difficult to open the front door of Lavida from the inside?

What Causes the Hissing Sound in a Volkswagen Engine at Idle?

What does the front of the Geely Binyue look like?

At what tire pressure level should the Haval F7 not be driven?

What Needs to Be Replaced During a Major Car Overhaul?

How wide is the Haval H9 roof rack?

Where is the fuse for the air pump in BMW 528gt?

Where is the Nissan Qashqai engine number located?