What automatic transmission is installed in the Alto?

2 Answers
GabrielFitz
07/29/25 12:24pm
The manufacturer of the Alto's automatic transmission is Aisin. Established in 1969, Aisin is a world-renowned professional developer and manufacturer of automotive automatic transmissions. In the field of automotive automatic transmissions, Aisin's products hold the highest market share globally. The Alto's automatic transmission uses a 4-speed automatic transmission. Automatic transmission: During driving, the transmission will automatically adjust to the most appropriate gear ratio based on the throttle position and vehicle speed. When using the Alto's automatic transmission in daily driving, pay attention to the following points: Do not delay changing the transmission oil for too long. Prolonged failure to change the transmission oil can lead to damage to internal components such as bearings and the housing. Avoid coasting in neutral for extended periods. Many experienced drivers may coast in neutral when driving manual transmission vehicles, but for automatic transmission vehicles, coasting in neutral can cause the transmission to overheat and may result in a noticeable jolt when shifting back into Drive (D). Never shift into Drive (D) or Reverse (R) before the vehicle has come to a complete stop. Some drivers, aiming for a smooth operation, shift into reverse while the vehicle is still moving, which can cause significant damage to the transmission gears and may lead to gear grinding or other faults over time. Avoid frequently climbing steep slopes in Drive (D). On steep inclines, automatic transmission vehicles may overheat due to high load or shift up too early, resulting in insufficient climbing power. In such cases, use manual mode to lock in a lower gear or switch to sport mode to protect the transmission. Do not tow the vehicle over long distances. If an automatic transmission vehicle breaks down, use a flatbed tow truck to move the vehicle onto the tow platform while it is in Neutral (N). Avoid using tow ropes or dragging the vehicle directly.
Was this review help?
1
5
Share
Rodrigues
08/13/25 11:27pm
The Alto I bought is the 2020 version, equipped with an AMT automatic transmission, which is an intelligent manual-automatic transmission. It drives quite smoothly, especially in city traffic where I don't need to shift gears manually, making it much easier. The AMT is more fuel-efficient, and maintenance is also cheap, like replacing parts doesn't cost much, making it suitable for novice drivers like me. However, there is a slight jerk when starting, but you get used to it. Overall, for a small-displacement car, this transmission is designed to be very practical. Before buying, I compared it with other brands, and the Alto's system offers great value for money. I don't regret choosing it.
Was this review help?
12
5
Share
Expand All
More Forum Discussions

How to Maintain Straight Driving in Driving Test Subject 3?

When maintaining straight driving in Driving Test Subject 3, you can select a distant point ahead as a reference and make slight adjustments to the steering wheel. Below is an introduction to Subject 3 knowledge: 1. Introduction: Subject 3, which includes the road driving skills test and the safety and civilized driving knowledge test, is part of the motor vehicle driver's license assessment. It is the abbreviated term for the road driving skills and safety and civilized driving knowledge test subjects in the motor vehicle driver's examination. The content of the road driving skills test varies for different types of vehicles eligible for driving. 2. Test Content: The road driving skills test for Subject 3 generally includes: preparation before getting on the car, simulated lighting test, starting, straight driving, gear shifting operations, changing lanes, pulling over, driving straight through intersections, turning left at intersections, turning right at intersections, passing pedestrian crossings, passing school zones, passing bus stops, meeting vehicles, and night driving. The safety and civilized driving knowledge test generally includes: safety and civilized driving operation requirements, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations such as tire blowouts, and post-accident handling knowledge.
13
4
Share

What is the method to remove ETC?

To remove ETC, you can use a hair dryer to heat the double-sided adhesive and then pry it off with a small plastic scraper. Below is some knowledge about ETC: 1. Fully automatic electronic toll collection system: It is one of the service functions of the intelligent transportation system, especially suitable for use on highways or in busy bridge and tunnel environments. Currently, there are dedicated ETC toll lanes at highway toll stations. As long as the vehicle owner installs a sensor card on the front windshield of the vehicle and preloads funds, there is no need for manual payment or stopping when passing through the toll station. The highway toll will be automatically deducted from the card, enabling automatic toll collection. 2. Function of ETC: Through the on-board electronic tag installed on the vehicle's windshield, it communicates with the microwave antenna in the ETC lane at the toll station via dedicated short-range communication. By utilizing computer networking technology for backend settlement processing with the bank, vehicles can pass through highway or bridge toll stations without stopping to pay the fees.
8
4
Share

What is the difference between 5W30 and 0W20 for the 2019 Buick Excelle?

Here are the relevant introductions for 5W30 and 0W20 in the Buick Excelle: 1. Different high and low-temperature performance: Compared to 5W30, 0W20 has different high and low-temperature performance. 0W20 offers better low-temperature fluidity, making it suitable for lower environmental temperatures. On the other hand, 5W30 provides better high-temperature protection with higher viscosity, which increases fuel consumption slightly. However, for the Buick Excelle model, 5W30 better meets the engine requirements. 2. Oil grade: The recommended oil grade is 5W-30. This grade generally meets the requirements for both winter and summer use in China. For hotter regions, 5W-40 can be used. Summer oil grades are categorized as 20, 30, 40, 50, and 60, where higher numbers indicate greater viscosity and suitability for higher maximum temperatures.
12
4
Share

How to reset the maintenance light on a 2017 Corolla 1.2t?

Press the one-touch start button to ignite. Press the trip meter reset button to switch to trip meter "A". Here is some relevant information about the Corolla maintenance light: 1. Maintenance Light: The maintenance light is a reminder function set by the manufacturer to prompt the owner to perform maintenance at certain mileage or time intervals. It appears in the form of an instrument panel or screen message or indicator light. Resetting the maintenance light means clearing the reminder information after completing maintenance, which is essentially resetting the information. 2. Purpose of the Maintenance Light: The purpose of the maintenance light is to record the mileage of important components, much like a timer in a sprint race, serving as a reminder for both the owner and automotive repair personnel. If the owner replaces the relevant components but does not reset the light, it will not affect the vehicle's performance, but it may cause issues for the next component replacement: it will be difficult to accurately know the usage time of the new components.
6
4
Share

Does Using Air Conditioning While Driving Consume More Fuel?

Using air conditioning accounts for approximately 20% of the engine's power, leading to increased fuel consumption. The exact increase depends on the vehicle's displacement and speed. Typically, a car that consumes 10 liters of fuel per 100 kilometers will see an increase of about 2 liters when the air conditioning is on. Below is an introduction to car air conditioning: Definition: The car air conditioning device (air conditioning device), referred to as car air conditioning, is used to adjust and control the temperature, humidity, air cleanliness, and airflow inside the car cabin to optimal conditions. It provides a comfortable riding environment for passengers, reducing travel fatigue, and creates good working conditions for the driver, playing a crucial role in ensuring safe driving. Main Components: Generally, it includes a refrigeration device, heating device, and ventilation device. This integrated system makes full use of the limited space inside the car, featuring a simple structure and ease of operation, making it a popular modern car air conditioning system internationally.
2
1
Share

What is the maintenance schedule for the 2019 GAC Fiat Jeep Compass?

Jeep officially stipulates that new vehicles should undergo their first free maintenance at a Jeep 4S store when they reach 5,000 kilometers, including an oil and oil filter change. After that, minor maintenance should be performed every 5,000 kilometers. Below are the details regarding the maintenance of the Compass: 1. Maintenance Details: The air filter should be replaced every 10,000 kilometers, while all vehicle fluids (including power steering fluid, transmission fluid, and brake fluid) should be replaced every 50,000 kilometers. The spark plugs should also be replaced every 50,000 kilometers. It is important to note that the fuel filter in the Compass is generally maintenance-free for its lifetime, while the cabin air filter is recommended to be replaced every 40,000 kilometers. 2. Maintenance for Different Models: The overall maintenance cost of the Jeep Compass is not high compared to similar models like the Ford Kuga. This advantage is primarily due to its longer maintenance intervals: every 6 months or 7,500 kilometers for the 1.4T model, and every 6 months or 10,000 kilometers for the 2.4L model. Additionally, the long replacement cycles for components like coolant also contribute to this advantage.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.