What aspects should you pay attention to when buying a new car?

1 Answers
SanLila
09/08/25 6:37am
When buying a new car, you need to pay attention to the following seven aspects: 1. Check the vehicle's exterior: First, pay attention to whether there are obvious paint damages on the body, and inspect carefully. 2. Check each door: Open all four doors separately to check if the opening force is the same for corresponding left and right doors, then observe if there is any sagging, and feel if the door's limit switch works. 3. Inspect the chassis and battery: Check if the connectors are corroded and if the indicator window is green. 4. Check the engine oil color: After running the engine for three minutes, turn it off, pull out the dipstick, and wipe it with a tissue; discard if the oil is black. 5. Inspect the cockpit: 6. Verify all expenses: When picking up the new car, make sure to check all expenses clearly, from the car itself to additional car accessories and maintenance documents, and verify each item. 7. Warranty and return policy: Confirm the warranty and return policy with the 4S store.
Was this review help?
17
1
Share
More Forum Discussions

What is the method to properly depress the clutch?

The main methods to properly depress the clutch are: 1. When depressing the clutch, the action must be quick and decisive—press it all the way down in one smooth motion. This ensures the clutch disengages completely, preventing clutch slippage and reducing wear on the clutch plate. 2. When releasing the clutch, follow this sequence: initially lift the clutch pedal quickly, slow down as you reach the half-engagement point, and then speed up again once the clutch's driving and driven parts are fully engaged. This technique ensures smooth vehicle operation without jerking. Additional tips: When operating the clutch pedal, pay attention to the following: 1. Maintain the correct foot position. Use the ball of your foot to control the clutch pedal, placing it firmly on the pedal when depressing. 2. Ensure the clutch is fully depressed to the lowest point. Avoid keeping the clutch partially engaged for extended periods to prevent unnecessary wear. 3. Time the clutch release properly. When driving, avoid releasing the clutch too quickly or unnecessarily revving the engine too high, as this accelerates clutch wear.
17
5
Share

Where is the Roewe engine produced?

Roewe engines are produced domestically, currently manufactured at the SAIC Roewe factory in Yizheng, Jiangsu, and the engine factory of Nanjing MG. Roewe automobile engines are jointly developed by SAIC Group and General Motors, belonging to an independent brand. The following is relevant information about Roewe: 1. Roewe (ROEWE) is an automobile brand under Shanghai Automotive Industry Corporation (Group), with the brand's automotive technology originating from Rover, which was previously acquired by SAIC. 2. SAIC Group and General Motors jointly developed two series of engines, namely the SGE (Small-Gasoline-Engine) series and the MGE (Medium-Gasoline-Engine) series.
2
0
Share

What is the disassembly and assembly sequence of cylinder head bolts?

The disassembly and assembly sequence of cylinder head bolts is as follows: 1. Use a torque wrench or a special socket to loosen each bolt of the cylinder head in a crisscross and symmetrical order from both sides to the middle. 2. Continue using the torque wrench or special socket to unscrew the bolts from the cylinder head in the same sequence. 3. Remove the cylinder head and bolts, place them in a specific location, and arrange them in order. Extended content: 1. The function of the cylinder head is to seal the cylinder, form the combustion space together with the piston, and withstand the effects of high-temperature and high-pressure gas. 2. The cylinder head bears the mechanical load caused by gas force and the tightening of cylinder bolts, as well as high thermal loads due to contact with high-temperature gas. To ensure good sealing of the cylinder, the cylinder head must not be damaged or deformed. Therefore, the cylinder head should have sufficient strength and stiffness.
6
3
Share

What is the size of the BMW 5 Series wiper blades?

The size of the BMW 5 Series wiper blades is: main wiper blade 24 inches (600 mm), secondary wiper blade 23 inches (575 mm); the wiper blades have a special interface for the BMW 5 Series. The following are the methods for selecting wiper blades: 1. First, determine the specification of the wiper blades used in the car. You can refer to the vehicle manual to see the wiper blade model indicated. 2. Pay attention to whether the connection method of the support rod to the wiper arm matches. Because some support arms are fixed to the wiper arm with screws, while others are locked with convex buckles. 3. Lift the wiper blade and touch the cleaned rubber wiper blade with your fingers to check for damage and the elasticity of the rubber blade. If the blade is aged, hardened, or cracked, the wiper blade is unqualified.
19
2
Share

What is the solution for the Cruze code95?

The solution for the Cruze code95 is to check the fault code, then replace the new SDM and perform Tis2web online programming after inspection, which will turn off the airbag light. Clear the fault code. Here is more extended information about the Cruze: 1. Exterior and interior: The design applies the most popular 'Mix-Match' concept in the fashion industry today. Through the mixed application of different materials and styles, it creates a new three-dimensional sculpture concept on the exterior and a unique sporty dual-cockpit style in the interior. 2. Engine: It adopts DVVT technology, which can provide ample power while minimizing fuel consumption. The 5-speed manual transmission paired with the engine offers high shift efficiency, and the suction-type shift mechanism enhances the driving pleasure. The 6-speed automatic manual transmission is smooth, fuel-efficient, and provides the same driving fun as manual transmission models in manual mode.
18
3
Share

Does the Mondeo wiper have left and right sides?

Mondeo wipers are divided into left and right sides. The left wiper of the Mondeo can only rotate about 90 degrees, while the right one has a larger rotation range, thus covering a bigger operating area. Typically, wipers are designed with the left one longer and the right one shorter, and both sweep from the bottom right to the top left. Generally, the wiper on the driver's side is longer, and the one on the passenger side is shorter. This design aims to maximize the driver's frontal field of vision while preventing rainwater from the right wiper from being swept to the left side, which could obstruct the driver's view. Below is some relevant information about wipers: 1. The power source of a car wiper comes from an electric motor, which is the core of the entire wiper system. The quality requirements for the motor in wipers are quite high. 2. A DC permanent magnet motor is used, and the wiper motor installed on the front windshield is generally integrated with the worm gear mechanism. The worm gear mechanism serves to reduce speed and increase torque, with its output shaft driving a four-bar linkage mechanism that converts continuous rotary motion into a back-and-forth swinging motion.
9
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.