What aspects does the 5T model include?

What are the reasons for the excessive motor temperature in the BAIC EX360?

Below are the reasons for the excessive motor temperature in the BAIC EX360: 1. Instantaneous voltage issue: When the motor's instantaneous voltage exceeds 10% above the rated voltage or falls below 5% of the rated voltage, it will cause the motor to heat up and experience a temperature rise under rated load. In such cases, the voltage should be checked and adjusted. 2. Power supply voltage issue: An imbalance in the three-phase power supply voltage of the motor can also cause the motor to overheat. This is because when the three-phase power supply voltage imbalance exceeds 5%, it leads to an imbalance in the three-phase current. The solution is to check and adjust the voltage. 3. Switch and circuit issues: Contact problems in the motor's power switch or a blown fuse in one phase can result in single-phase operation, leading to an increase in motor temperature. The solution is to repair or replace the damaged components.

10

3

Share

Does a folded side mirror after hitting someone count as an accident?

Yes, a folded side mirror after collision is considered a minor traffic accident. 1. Minor traffic accidents refer to incidents involving vehicles on the road that do not result in personal injuries, such as damage to external components like side mirrors, headlights, or hoods. 2. If the side mirror hits a pedestrian and causes minor scratches, it may violate public security management regulations. If disputes arise between the parties involved, the offender may face administrative detention. The correct approach is to apologize to the injured party and provide compensation. 3. In most cases, injuries caused by a side mirror hitting a pedestrian are not directly due to the impact but rather result from the pedestrian being startled or failing to avoid the collision in time, leading to a fall. The severity of injuries from falls can vary, so never assume it's safe to leave the scene after hitting a pedestrian or non-motorized vehicle. 4. If you hit someone, immediately get out of the vehicle to check the injured person's condition. If medical attention is needed, call 120 for emergency assistance, then dial the traffic police hotline 122 to wait for the authorities to determine responsibility. If the injured person needs to be moved, first mark their original position and the vehicle's location before moving them. For minor injuries, both parties can negotiate compensation for medical expenses.

5

Share

Can the vehicle be transferred if the original engine number is engraved after replacing the engine?

Each engine has its own serial number, and the original number cannot be used. You can apply to the vehicle management office to change the engine number. For registered motor vehicles, the owner must apply for a change of registration with the vehicle management office at the place of registration under any of the following circumstances: 1. Changing the body color. 2. Replacing the engine. 3. Replacing the body or frame. 4. Replacing the entire vehicle due to quality issues. 5. Changing the use nature, such as converting a commercial vehicle to a non-commercial vehicle or vice versa. Relevant information about automobile engines is as follows: 1. Introduction: The automobile engine is the device that provides power to the vehicle, serving as the heart of the car and determining its power, fuel efficiency, stability, and environmental performance. Common gasoline and diesel engines are both types of reciprocating piston internal combustion engines. 2. Classification: Based on different power sources, automobile engines can be categorized into diesel engines, gasoline engines, electric vehicle motors, and hybrid types.

1

4

Share

How to manually reset the maintenance light on the Mazda6 Atenza?

Manually resetting the maintenance light on the Mazda6 Atenza requires operation on the main control panel. Here are the specific details about the Atenza: 1. Configuration: The new vehicle comes standard with features such as the Smart Idling Stop System and Brake Energy Regeneration System. The 2.5L model of the Atenza achieves a 0-100 km/h acceleration time of just 8.3 seconds, with a combined fuel consumption as low as 6.9 liters per 100 km, while the 2.0L model has a combined fuel consumption of only 6.3 liters per 100 km. 2. Exterior: The vehicle adopts Mazda's KODO design philosophy, featuring a U-shaped front grille paired with LED headlights for a stronger sporty feel. The new model introduces an 11-speaker audio system. Compared to the previous generation Mazda6, the Atenza's wheelbase has been increased by 113mm, providing more spacious rear seating. The Atenza utilizes the SKYACTIV-Chassis technology, equipped with high-performance MacPherson strut front suspension + multi-link rear suspension. Through structural optimization, it achieves both weight reduction and increased rigidity.

16

0

Share

Can Different Motor Oils Be Mixed?

Motor oils should not be mixed, and it is advisable to avoid mixing oils from different brands. This is because different formulations contain varying additives that may react with each other, leading to potential issues. Each brand's oil has distinct additive compositions, and chemical reactions can cause the oil to thicken or thin, partially losing its lubricating properties. More information about motor oil is as follows: 1. Motor oil is the lubricant for engine operation, providing lubrication, cleaning, cooling, sealing, and wear reduction for the engine. 2. It neutralizes acids produced from fuel combustion and lubricant oxidation, improves piston ring sealing, and plays a significant role in reducing engine component wear and extending service life.

11

1

Share

How to Use the Temp Function in a Car?

The 'temp' in a car stands for temperature, and you can adjust the car's temperature using the temp button. Here are the steps to use the temp function: 1. First, locate the temp button, which is usually found on the car's central console or, in some models, near the rear air vents. 2. Press the temp button to independently control the car's air conditioning temperature. The car's air conditioning system includes cooling, heating, and ventilation functions. The structure of the air conditioning system is relatively simple, making it easy for the driver to operate. Higher-end models come with automatic air conditioning, allowing temperature adjustment with just one button. Lower-end models are equipped with manual air conditioning, requiring the driver to adjust temperature, fan speed, and airflow direction using the control panel.

15

3

Share

What aspects does the 5T model include?

What are the reasons for the excessive motor temperature in the BAIC EX360?

Does a folded side mirror after hitting someone count as an accident?

Can the vehicle be transferred if the original engine number is engraved after replacing the engine?

How to manually reset the maintenance light on the Mazda6 Atenza?

Can Different Motor Oils Be Mixed?

How to Use the Temp Function in a Car?

Why does the Mazda Atenza sway from side to side at low speeds?

What procedures are required to change a seven-seater to a four-seater?

What are the benefits of having wider rear wheels than front wheels?

What Causes the Jerking During Low-Speed Gear Shifts in the Atenza?