What Are Vehicle Emission Standards?

1 Answers
DaniellaAnn
07/29/25 8:20pm
Vehicle emission standards refer to the regulations on the content of harmful gases emitted from automobile exhaust, such as CO (carbon monoxide), HC plus NOx (hydrocarbons and nitrogen oxides), and PM (particulate matter, soot). With the increasing severity of automobile exhaust pollution, countries around the world have established corresponding regulatory systems for vehicle emissions, promoting advancements in emission control technologies through stringent regulations. To curb the generation of harmful gases from vehicles and encourage manufacturers to improve their products to reduce these emissions at the source, both Europe and the United States have formulated relevant vehicle emission standards. The European standards, in particular, serve as a reference for China's vehicle emission standards, and domestically produced new vehicles are required to indicate the European emission standards their engines meet.
Was this review help?
3
5
Share
More Forum Discussions

What is the difference between Haval Blue Label and Red Label?

The differences between Haval Blue Label and Red Label: 1. Different interior styles: The Haval Blue Label interior design is relatively dynamic, leaning towards youthful vitality; the Haval Red Label interior atmosphere is more cozy, leaning towards home-oriented design. 2. Different exterior styles: The Haval Blue Label models feature a hexagonal grille design, while the Haval Red Label models have a trapezoidal grille design. 3. Different product positioning: The Haval Blue Label style is simple, with a sporty and dynamic design, targeting the new young demographic; the Haval Red Label style is bold and flamboyant, targeting mainstream family users. Great Wall Haval is a sub-brand of Great Wall Motors. The Haval brand, primarily focused on SUV models, operates in parallel with the Great Wall brand. The Haval lineup includes the H series and F series.
4
4
Share

Is a Four-Wheel Alignment Necessary After Replacing All Four Tires?

Replacing all four tires does not require a four-wheel alignment, but a wheel balance is necessary. Changing tires or repairing a tire only involves removing and reinstalling the tire from the wheel hub, which does not necessitate a four-wheel alignment. A four-wheel alignment is only required when the vehicle experiences issues such as pulling to one side, severe uneven tire wear, or tire cupping. Four-wheel alignment is based on the vehicle's four-wheel parameters and involves adjustments to ensure optimal driving performance and reliability. Benefits of a four-wheel alignment include: 1. Ensuring straight-line stability; 2. Enhancing driving comfort; 3. Extending tire lifespan; 4. Improving driving safety; 5. Reducing wear on suspension components; 6. Balancing improved traction with comfort.
13
1
Share

What to Do When the Corolla Key Won't Turn?

Key malfunction is usually caused by a nearly depleted battery. Pry open the remote key along the notch and replace it with a new battery. If the central door lock control system cannot be operated with the remote or the operating range is reduced, it may be due to the following reasons: 1. The remote may be too far from the vehicle; the remote battery may be dead or low on power; there may be other vehicles or obstacles blocking the signal. 2. Frequent repeated operation of the remote outside its range may require resetting the remote synchronization. 3. If the central door lock control system is overloaded due to repeated operations in a short period, the power may be temporarily cut off; it may also be affected by external environmental radio signal interference.
3
4
Share

What aspects should be paid attention to in daily engine maintenance?

Daily engine maintenance should pay attention to: 1. Keep the crankcase well ventilated. Most gasoline engines are equipped with a PCV valve, but pollutants in the blow-by gas will deposit around the PCV valve, which may clog the valve. It is necessary to regularly remove pollutants around the PCV valve; 2. Regularly change the oil and filter, and keep the oil volume moderate; 3. Regularly clean the crankcase; 4. Use lubricating oil of appropriate quality grade. The automobile engine is the device that provides power for the car and is the heart of the car, determining the car's power, economy, stability, and environmental protection. According to different power sources, it can be divided into diesel engines, gasoline engines, electric vehicle motors, and hybrid power.
4
4
Share

What is the normal idle speed for an automatic transmission?

Under normal conditions, the idle speed for an automatic transmission car is 700-800 RPM. Below are the specific details about car idle speed: 1. High idle speed: The hazards of high idle speed include increased fuel consumption, elevated engine operating temperature, and accelerated machine wear. 2. Low idle speed: The hazards of low idle speed include stalling during startup, which can damage the engine and starter if frequent restarts occur. Additionally, excessively low idle speed may lead to stalling while driving, and long-term operation can cause carbon buildup inside the engine cylinders, resulting in sluggish acceleration. 3. Prerequisites for idle speed adjustment: The engine temperature should be normal, valve clearance appropriate, ignition system functioning properly, all pipelines well-sealed, choke fully open, throttle able to close tightly, etc.
14
4
Share

What is the priority order for left turns, right turns, and going straight?

The following is the priority order for going straight, left turns, and right turns: 1. Yield to vehicles coming from the right: When your vehicle is turning and a vehicle from the right lane is also turning, yield to the vehicle from the right lane. 2. Turning vehicles yield to vehicles going straight: Turning motor vehicles must yield to motor vehicles going straight. 3. Right-turning vehicles yield to left-turning vehicles: For vehicles traveling in opposite directions, right-turning vehicles must yield to left-turning vehicles. (The above three rules are prioritized from 1 to 3. If the actual situation conforms to rule 1, there is no need to consider the other two rules. If rule 1 does not apply to the actual situation, then consider rule 2, and so on).
19
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.