···
Log in / Register

What are the width, height, and length of a fire truck?

4 Answers
VanJaxon
07/29/25 9:19pm
Dongfeng dual-rear-axle water-foam dual-purpose fire truck dimensions are: Length × Width × Height = 9550 × 2500 × 3400 (mm). Below are relevant details: Equipment: Modern fire trucks are typically equipped with steel ladders, water guns, portable fire extinguishers, self-contained breathing apparatus, protective clothing, demolition tools, first aid equipment, etc. Some also carry large firefighting equipment such as water tanks, water pumps, and foam fire suppression systems. Appearance: Most regional fire trucks are red in color, though some areas use yellow, including certain special fire trucks. Fire trucks usually feature emergency bells, sirens, warning lights, and strobe lights on top.
Was this review help?
14
1
Share
DiJocelyn
08/15/25 7:55pm
I've been researching fire truck dimensions lately because their massive size is quite fascinating. Typically, they're about 2.5 meters wide, equivalent to two adults standing shoulder to shoulder; approximately 3.5 meters tall, taller than a standard garage door; and 8-10 meters long, like a small bus. However, ladder trucks can be as tall as 4.5 meters and over 12 meters long. This design is meant to transport water and rescue equipment, such as water pumps and long ladders. The large size makes turning on narrow roads challenging, especially in residential areas where you need to be careful not to scrape surrounding vehicles. In reality, fire trucks vary by region—for example, rural areas use smaller ones, while urban trucks are wider to handle high-rise buildings. Their size is maintained for rapid emergency response, so don't park in front of them and block the way.
Was this review help?
9
3
Share
Expand All
GenevieveLynn
10/17/25 3:08am
Having driven for many years, I understand that the size of a fire truck is crucial for driving safety. With a width of about 2.5 meters, a height of 3-3.5 meters, and a length of 9-11 meters, these dimensions make it resemble a moving wall on the road. Its large turning radius means I always yield at intersections, as its structure includes water pumps and tanks that require ample space. Height restrictions can sometimes be challenged by tunnels, but urban height limits under 4 meters usually allow passage. The excessive length occupies more parking space and can easily block streets. Despite its size, its core purpose is as a life-saving tool, with standardized dimensions for rapid response. In emergencies, we must cooperate and yield the right of way.
Was this review help?
19
2
Share
Expand All
LeMarley
11/30/25 3:52am
At the school event, we saw a fire truck display. The teacher said it was about 2.5 meters wide, as wide as a classroom desk; 3.5 meters tall, much taller than me; and around 9 meters long, equivalent to several kids standing in a line. The size varies little with different colors, like that big red truck with a ladder that can reach even higher. The reason for such dimensions is all the equipment packed inside, like water cannons and first aid kits. A little fun fact: fire trucks in small towns might be shorter, while those in big cities are longer to reach high-rise buildings. It's so fascinating because it can put out big fires and protect everyone.
Was this review help?
5
1
Share
Expand All
More Forum Discussions

Where to Collect the Inspection Exemption Label for Vehicles?

Vehicle inspection exemption labels can be obtained at the local vehicle management office or through the Traffic Management 12123 App without any fees. Below is some information about the inspection exemption label for vehicles: 1. Vehicle Management Office: If applying at the vehicle management office, the vehicle owner needs to bring the vehicle's driving license (original and copy), the ID card of the vehicle owner, the compulsory traffic insurance policy of the vehicle, and other relevant documents. Before processing, all traffic violation fines must be settled. 2. 12123 App: On the homepage of the Traffic Management App, find the 'Apply for Inspection Exemption Label' option, click on it, and then select the vehicle status option. Click 'Query,' and a prompt box for handling the annual inspection service will appear. Read the prompt information carefully, confirm, and click 'Continue Processing.' Fill in the vehicle information as required, review the prompt information, confirm, and click 'Next' to complete the application for the inspection exemption label.
17
3
Share

How to install the alternator belt on a Mercedes-Benz GLA?

Installation method for the alternator belt on a Mercedes-Benz GLA: 1. Loosen the generator fixing screw and the belt tension adjustment screw; 2. Push the generator towards the engine to minimize the distance between the pulleys, then place the belt on and align it properly; 3. Adjust the belt tension to the appropriate level, and tighten the engine fixing screw and adjustment screw. The Mercedes-Benz GLA is a compact SUV introduced by Beijing Benz, with dimensions of 4427mm in length, 1834mm in width, and 1610mm in height, and a wheelbase of 2729mm. It is equipped with a 1.3T turbocharged engine, delivering a maximum power of 100kw, and matched with a 7-speed dual-clutch or 8-speed dual-clutch transmission.
11
0
Share

Can a C1 License Drive Yellow License Plate Vehicles?

C1 license cannot drive yellow license plate vehicles, it only permits driving blue license plate vehicles. Yellow license plate vehicles typically refer to heavy-duty or large vehicles, which require a B-class license or above to operate. The C1 license is designated for small and micro passenger vehicles, as well as light, micro, and small special-purpose vehicles. The full name of a driver's license is the motor vehicle driving license, which is a legal document issued by the administrative authorities after a person who is legally allowed to learn to drive a motor vehicle has studied and mastered traffic regulations and driving skills, and passed the relevant tests. Driving a motor vehicle requires certain driving skills. Without these skills, driving a motor vehicle arbitrarily may lead to traffic accidents. Generally, individuals cannot drive on the road without a license.
14
0
Share

How much engine oil should be added to a Mondeo?

Mondeo requires 4.5 liters of engine oil. If it's a major overhaul without activation, approximately 5 liters are needed. The specific steps for adding engine oil are as follows: 1. Open the driver's side door; 2. Pull the hood release lever located on the left side of the driver's leg area; 3. Open the hood; 4. Unscrew the engine oil cap and add the engine oil; 5. The oil level should be between the upper and lower marks on the dipstick. The Mondeo is a mid-size car introduced by Changan Ford, with dimensions of 4873mm in length, 1852mm in width, and 1470mm in height, and a wheelbase of 2850mm. It is equipped with either a 1.5T or 2.0T turbocharged engine, with maximum power outputs of 134kw and 152kw respectively, paired with a 6-speed automatic transmission.
14
2
Share

How to Obtain the Vehicle Environmental Protection Label?

Vehicle environmental protection labels can be obtained at the vehicle management office. Owners need to bring their vehicle license, motor vehicle registration certificate, and their own ID card. The steps are as follows: 1. Submit the required documents at the issuance window of the vehicle management office; 2. The vehicle management office will review the documents; 3. Upon successful review, the vehicle management office will issue and print the classification label; 4. The applicant fills out the registration form; 5. The applicant receives the label and retrieves their valid documents. The vehicle environmental protection label is a classification label for motor vehicle emission standards issued by the state, categorized into yellow and green labels. It is issued after reviewing the vehicle type and emission standards, aiming to facilitate energy-saving and emission-reduction inspections and regular environmental protection checks for vehicles.
15
2
Share

What to do if a car window can only go down but not up?

Solutions for a car window that can only go down but not up include: 1. Initialize the window, which is usually caused by a malfunction in the window control system; 2. Remove dirt from the window lift channel by inserting a chopstick wrapped in a wet towel into the guide channel and moving it up and down to clean; 3. Apply lubricant or replace the window seal. Most cases where the car window cannot move up or down are due to mechanical jamming, and applying some lubricant after cleaning the guide rails should resolve the issue. Car window regulators can be structurally categorized into arm-type regulators and flexible-type regulators. Arm-type regulators include single-arm regulators and double-arm regulators, while flexible-type regulators include cable-type regulators, belt-type regulators, and flexible-shaft-type regulators.
9
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.