What are the width and height of the Audi A4?

What is the symbol for China V?

The symbol for China V standard is a 'V', where V stands for China V. Below is a partial introduction about the China V standard: 1. The National Fifth Stage Motor Vehicle Pollutant Emission Standard, abbreviated as 'China V Standard', has an emission control level equivalent to the European Union's currently implemented Euro 5 emission standard; 2. The EU has been enforcing this standard since 2009, which imposes stricter limits on vehicle emissions such as nitrogen oxides, hydrocarbons, carbon monoxide, and particulate matter. Each upgrade from China IV to China V reduces single-vehicle pollution by 30 to 50%.

19

2

Share

Does coasting in neutral save fuel for manual transmissions now?

Coasting in neutral with a manual transmission does not necessarily save fuel and may even increase fuel consumption. The specific principles are as follows: 1. Many car models are equipped with electronic fuel injection systems. When the car shifts into neutral, the ECU defaults to the car being in an idle state, thereby increasing the fuel injection volume to maintain idle speed. 2. The electronic fuel injection control system itself has the function of reducing or cutting off fuel. Using neutral coasting at this time loses this function and increases fuel injection volume. The damage caused by coasting in neutral with a manual transmission is as follows: 1. Causes jerking; 2. Reduces braking efficiency; 3. Affects engine lifespan; 4. Transmission gears are prone to breakage.

8

0

Share

How Does the Car Flasher Work?

Car flashers operate through a flasher unit installed in the vehicle, which controls the blinking of the lights. The hazard lights (double flashers) are activated by simultaneously turning on both left and right turn signals. There are three common types of automotive flasher relays: 1. Capacitor-type flasher: This works by utilizing the charging and discharging delay characteristics of a capacitor, causing the electromagnetic forces generated by the two coils of the relay to alternately add and subtract. This periodic switching action makes the turn signal lights blink. 2. Thermal (bimetallic) flasher: This operates based on the thermal effect of electric current, using the expansion and contraction of a bimetallic strip to drive a sudden movement of the flasher blade, thereby opening and closing the contacts to make the turn signal lights blink. 3. Electronic flasher: This type utilizes the switching characteristics of transistors and the charging/discharging delay characteristics of capacitors to control the power supply to the relay coil, opening and closing the contacts to make the turn signal lights blink. Due to their reliability and long service life, electronic flashers are now widely used in automotive turn signal systems.

9

0

Share

How Long Does the Key Battery Last?

Under normal circumstances, the battery of a car key can last for 3 years. If the car key battery runs out of power, it needs to be replaced. When the car key is running low on battery, there are several signs: 1. The effective range of the car key remote decreases. Previously, you could unlock the car door within a distance of 6 meters, but when the battery is low, you need to get closer to the car, even right next to the door for it to respond. 2. The remote control for the car door works intermittently, sometimes requiring multiple presses to get a response. 3. If you notice that the indicator light on the car key is significantly dimmer than usual, or flickers on and off, it indicates that the car key is about to run out of power, and the battery needs to be replaced immediately.

20

0

Share

What was the final production year for the Mercedes-Benz W221?

W221 is the chassis code for the ninth-generation S-Class model from Mercedes-Benz, which was launched in 2008. Relevant details are as follows: 1. The S-Class is a large sedan under the Mercedes-Benz brand, competing in the same segment as the Audi A8L and BMW 7 Series. The S-Class has a wheelbase of 3165 mm, with length, width, and height dimensions of 5259 mm, 1899 mm, and 1497 mm respectively. The S-Class is equipped with two engine options: a low-power version of the 3.0-liter turbocharged engine and a high-power version of the 3.0-liter turbocharged engine. 2. The low-power 3.0-liter turbocharged engine delivers 299 horsepower and a maximum torque of 400 Nm. This engine reaches its peak power at 5800 rpm and its maximum torque between 1800 to 4000 rpm. It features a 48V mild hybrid system, direct fuel injection technology, and an aluminum alloy cylinder head and block. It is paired with a 9-speed automatic transmission (9AT). 3. The high-power 3.0-liter turbocharged engine produces 367 horsepower and a maximum torque of 500 Nm. This engine achieves peak power between 5500 to 6100 rpm and maximum torque between 1800 to 5800 rpm. It also includes a 48V mild hybrid system, direct fuel injection technology, and an aluminum alloy cylinder head and block. It is matched with a 9-speed automatic transmission (9AT).

12

5

Share

How Many Times Can You Take the Subject 1 Driving Test?

In principle, as long as the driving test registration is valid (3 years), there is no limit to the number of retakes. According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," the Subject 1 test can be taken twice. If the first attempt is unsuccessful, the second retake is free. If the second attempt is still unsuccessful, the Subject 1 test is terminated, and you can only reschedule the test after ten days. Subject 1, also known as the Subject 1 theory test or driver theory test, is part of the motor vehicle driving license assessment. The test content includes driving theory basics, road safety laws and regulations, local regulations, and related knowledge. The test is computer-based and has a time limit of 45 minutes. To pass the Subject 1 driving test, a score of 90 is required. The test consists of 100 questions, divided into single-choice and true/false questions, with each question worth 1 point and a total score of 100. If you answer 11 questions incorrectly during the test, the system will automatically submit the test and end the session. Subject 1 test content: Driving license and motor vehicle management regulations; road traffic conditions and regulations; road traffic safety violations and penalties; road traffic accident handling regulations; basic knowledge of motor vehicles; local regulations; knowledge of braking systems and safety devices for large and medium-sized passenger and freight vehicles; specialized knowledge for wheeled self-propelled machinery, trams, and trolleybuses. Subject 1 test precautions: During the test, students should pay attention to their attire—no sandals are allowed. Electronic devices and bags are not permitted in the examination room. Bring your ID card and queue to enter the waiting hall. Observe the precautions and procedures on the large screen, and store personal belongings in a locker before entering the examination room. Inside, verify your identity at the designated area to be assigned a seat. Once seated, begin the test. Ensure the camera is aimed at you and follow test discipline. If you fail the first attempt, a same-day retake is allowed. If you fail again, you must pay to reschedule. After the test, queue to collect your score report and sign it. Failure to sign renders the result invalid. There is no limit to the number of times you can reschedule the Subject 1 test. Each subject test allows one retake if the first attempt is unsuccessful. If you do not attend the retake or fail it, the test is terminated, and the applicant must reschedule. For Subject 2 and Subject 3, only five test attempts are allowed, and rescheduling must be done ten days later. If the Subject 3 safe and civilized driving knowledge test is failed, the passed road driving skills test scores remain valid. The driving test consists of three subjects: Subject 1, Subject 2, and Subject 3. Subject 1 refers to the road traffic safety laws, regulations, and related knowledge test; Subject 2 refers to the field driving skills test; and Subject 3 is divided into two parts: road driving skills and safe and civilized driving knowledge test. The safe and civilized driving knowledge test is conducted after Subject 3, so it is commonly referred to as Subject 4. However, the official term (as per the Ministry of Public Security Order No. 123) does not include "Subject 4."

7

1

Share

What are the width and height of the Audi A4?

What is the symbol for China V?

Does coasting in neutral save fuel for manual transmissions now?

How Does the Car Flasher Work?

How Long Does the Key Battery Last?

What was the final production year for the Mercedes-Benz W221?

How Many Times Can You Take the Subject 1 Driving Test?

What is the difference between long-wheelbase and short-wheelbase vehicles?

What Causes the Car Tire Pressure Warning Light to Illuminate?

What Causes Valve Noise?

Does the 2021 Vios have hidden features?