What are the wheel specifications of the Binyue?

What does non-load-bearing body mean

Non-load-bearing body refers to a chassis structure where the frame carries the entire vehicle body, with the engine, suspension, and body all mounted on the frame. The frame features bolt holes for securing the body and bases for fixing springs. Below is an introduction to related content: 1. Composition: Vehicles with non-load-bearing bodies have a rigid frame, also known as a chassis beam frame. 2. Types: Currently, there are relatively few models with non-load-bearing bodies, mostly found in trucks and specialized off-road vehicles. 3. Advantages: The greatest advantage of this structure is the high body strength, as the steel frame can provide strong body rigidity, which also enhances safety. This is particularly important for heavy-duty trucks and off-road vehicles.

9

3

Share

What to Do When a Car Rolls Over?

Here are the steps to follow after a car rolls over: 1. Stay calm and avoid rash actions to prevent fatal mistakes due to panic. 2. Immediately turn off the engine to avoid hazards such as fire or explosion. 3. If the doors are deformed and cannot be opened, break the side window glass to escape. 4. In case of a side rollover, passengers should exit from the opposite side seats to avoid secondary rolling. 5. After escaping, always observe the surroundings to ensure safety before moving out, especially on highways—move outside the guardrail and stay as far away from the accident site as possible to ensure personal safety and prevent secondary accidents.

11

5

Share

Does the Transmission Control Module of Audi A6L Need to Be Matched After Replacement?

Replacing the transmission control module of Audi A6L requires matching. Definition of Transmission: A device that changes the speed ratio and direction of motion. It is used in automobiles, tractors, ships, machine tools, and various machines to alter the torque, speed, and direction of motion transmitted from the driving shaft to the driven shaft under different working conditions. A gear-driven transmission generally consists of a housing and several gear pairs. Function of Transmission: To change the transmission ratio between the engine and the wheels, enabling the engine to operate under optimal conditions, expanding the torque and speed transmitted from the engine to the driving wheels, and achieving different speeds; to allow the vehicle to reverse; and to set a neutral position.

4

1

Share

What gear should be used when driving uphill?

When driving uphill, the appropriate gear depends on the steepness of the slope, the vehicle's performance, and the climbing speed. Here are the relevant guidelines: 1. Manual transmission vehicles going uphill: The gear selection should consider the climbing power of your specific vehicle. Each car has different climbing capabilities. For gentle slopes, 4th gear may be sufficient - the key is to make proper judgment about the slope in advance and master the coordination between clutch and accelerator. This represents an economical, fuel-efficient and safe driving technique. 2. Automatic transmission vehicles going uphill: For most slopes, D (Drive) gear is adequate. The principle of automatic transmission is that after stopping, the vehicle always starts in 1st gear, then upshifts according to power demand and speed. Similarly, it will downshift sequentially based on power requirements and speed, hence the name 'automatic transmission'.

4

Share

Do I still need to engage the handbrake when in N gear?

After shifting into N gear, it is necessary to engage the handbrake; otherwise, the car may roll. If the handbrake is not engaged, the driver must keep the brake pedal depressed. N gear is the neutral gear, and when engaged, the connection between the transmission and the wheels is disconnected, meaning the engine's power cannot be transmitted to the wheels. Below are the differences between N gear and P gear: 1. When in N gear: There is no locking mechanism to secure the transmission gears, so the car will roll if the handbrake is not engaged. When in P gear: The locking mechanism inside the transmission secures the gears, effectively locking the wheels indirectly. If the handbrake is not engaged while in P gear, the car cannot move normally. 2. P gear is used when parking and turning off the engine. If P gear is not engaged before turning off the engine, the car cannot be shut down properly. N gear is suitable for short stops without turning off the engine.

11

0

Share

What does EPC mean when it appears in a car?

The EPC indicator light can illuminate in two states: during the power-on self-test and under other circumstances. The power-on self-test is an indication that the vehicle is checking the status of all sensors before driving. Generally, if the engine is not started after powering on, the light will turn off by itself after about 3 seconds. If the EPC light remains on under other circumstances or does not turn off for a long time after the vehicle is started, the main causes for the EPC light staying on include faults in the engine intake system, throttle valve issues, fuel system problems, engine malfunctions, ECU control unit failures, and brake light faults. Below is a detailed explanation of the reasons for the EPC light illuminating under other circumstances: Engine intake system fault: The EPC light will illuminate if the engine intake is obstructed or insufficient. Throttle valve fault: Carbon buildup is a common issue with the throttle valve. Additionally, dirt accumulation can affect intake, causing the indicator light to turn on. Fuel system fault: Issues such as substandard fuel, fuel deterioration, or poor fuel atomization can trigger the light. Engine fault: Insufficient engine pressure or problems with the intake valves and other powertrain components can also cause the EPC light to illuminate. ECU control unit fault: For example, interference with the vehicle computer signals or false alarms from the vehicle computer. Brake light fault: Situations like non-functioning brake lights, faulty brake switches, or brake circuit issues can trigger the EPC light. Solutions for the EPC light illuminating: Troubleshoot intake system issues, use the appropriate fuel grade, clean the throttle valve, etc. Remove carbon deposits from relevant parts. Re-flash ECU-related data. If the EPC light turns on, the owner can first try turning off the engine and restarting it to see if the EPC light remains on. If it does not illuminate again, there may be no issue, possibly due to interference affecting the EPC indicator. If the EPC light stays on or frequently illuminates, the vehicle should be taken to the nearest service center for professional diagnosis and repair to eliminate potential safety hazards promptly. The full English name of EPC is Electronic-Power-Control, which translates to electronic power control. Most people refer to it as the engine electronic stability system. The EPC system mainly includes controllers and sensors related to the powertrain. When sensor data in the system is abnormal, the EPC system will take predefined measures for the powertrain. Common EPC indicator lights usually display in two colors: yellow and red. If the EPC fault light is yellow and the vehicle can still operate normally, drive slowly to a repair point for inspection. If the EPC fault light is red, the situation is more severe. Pull over immediately and contact a repair technician for assistance. Continuing to drive could directly damage the vehicle's core components or compromise driving safety.

13

3

Share

What are the wheel specifications of the Binyue?

What does non-load-bearing body mean

What to Do When a Car Rolls Over?

Does the Transmission Control Module of Audi A6L Need to Be Matched After Replacement?

What gear should be used when driving uphill?

Do I still need to engage the handbrake when in N gear?

What does EPC mean when it appears in a car?

What is BMW's high-performance caliper?

Where is the coolant temperature sensor located on the BMW B48?

Why can't the front passenger door of Volkswagen Sagitar be locked?

What is the reason for the Elantra burning oil without emitting smoke?