What are the warning symbols on the car dashboard?

What does it mean when the EPC light is on and the JAC truck cannot move?

When the EPC indicator light on a JAC truck remains constantly illuminated, it indicates a malfunction in the engine or electronic systems, and the vehicle should not be driven further. Immediate contact with a repair shop is necessary. Of course, if the engine stalls due to improper operation, the indicator light may also illuminate. If the light turns off after restarting the engine, it means everything is functioning normally. When the EPC light is on in a JAC truck, it signifies a vehicle malfunction, and the driver should stop to inspect the issue. Possible causes of the fault include: 1. The EPC light may illuminate due to a dirty throttle body. 2. Additionally, a faulty brake light switch can also lead to this phenomenon. 3. Another potential cause is a leak in the intake system, which, when detected by the engine control unit, will trigger the EPC warning light. 4. Leaks in the crankcase ventilation system can also result in this fault. It is recommended to visit an authorized 4S dealership for a comprehensive computer diagnostic test.

13

5

Share

Yaris L Maintenance Schedule Overview?

Toyota Yaris L's first maintenance for a new car is at 5,000 kilometers or 3 months, whichever comes first. After the first maintenance, the service interval is every 5,000 kilometers. The purpose of car maintenance is to keep the vehicle clean, maintain normal technical conditions, eliminate potential hazards, prevent failures, slow down the deterioration process, and extend the service life. Below is an introduction to the Yaris L: 1. Exterior: The new Yaris L maintains the original oversized body dimensions and the bold front grille design style. With the goal of "enhancing a distinctive image and reinforcing iconic appearance," it features a newly designed bumper and light clusters exclusive to the Chinese market, along with added details like daytime running lights. The rear light cluster's light source layout has been revamped, and the introduction of LED lighting also reduces the vehicle's energy consumption. 2. Safety Features: The new Yaris L builds upon the existing ABS+BA (Anti-lock Braking System/Brake Assist) by adding VSC (Vehicle Stability Control) and TRC (Traction Control) systems. These systems continuously monitor the operation of all four wheels, selectively braking wheels that slip on wet or snowy roads, and limiting engine output to ensure the vehicle follows the intended path, preventing loss of control or skidding.

10

3

Share

What causes the Chery Tiggo to have sluggish acceleration and a muffled sound?

Reasons for the Tiggo engine's sluggish acceleration include: 1. Carbon deposits: Carbon deposits can occur in the cylinders, throttle body, spark plugs, and intake system. These areas are directly related to the engine's power output. When there is excessive carbon buildup inside the engine, the vehicle's ignition energy decreases, intake efficiency drops, and ultimately, the engine's power is reduced, resulting in sluggish acceleration and a muffled sound. 2. Fuel system issues: Using an incompatible fuel grade can lead to reduced power output. Alternatively, if the fuel tank vent is blocked, or if the fuel tank switch, fuel filter, or fuel lines between the tank and carburetor are partially clogged, the required fuel supply may not be met, causing a lean air-fuel mixture and sluggish engine acceleration. 3. Intake problems: If the air filter is not cleaned regularly and becomes clogged, insufficient air intake can result in an overly rich air-fuel mixture, reducing engine power. For vehicles equipped with a turbocharger, if the turbocharging system malfunctions, the engine may remain sluggish and fail to deliver full power even when the throttle is applied. 4. Engine overheating: Engine overheating can impair lubrication, increase mechanical wear, and reduce engine power, leading to sluggish acceleration.

18

1

Share

How often should ETC be charged?

ETC devices come in two types: wired charging and solar panel charging. Solar-powered ETC devices do not require charging, while wired charging ETC devices need to be charged using a charger. Generally, an ETC device can last 2-3 months on a single charge. Both types of ETC electronic tags have internal batteries. Solar-powered ETC devices do not require charging during daily driving, and their lithium batteries can last up to 3 years under normal use. However, for those who do not use ETC frequently, it is recommended to charge the ETC device every 3 months to effectively mitigate the impact of natural battery discharge on its lifespan. ETC stands for Electronic-Toll-Collection, meaning electronic toll collection system. To apply for ETC, you need to provide the original and photocopies of the vehicle owner's valid ID and vehicle registration certificate. If the application is not made by the owner, a valid ID of the agent is also required. The photocopy of the vehicle registration certificate should include the page with the most recent annual inspection stamp. Additionally, a bank card for deducting highway tolls is required, and the applicant must be between 18 and 60 years old, with the vehicle registered under their name. How ETC works: Through the onboard electronic tag installed on the vehicle's windshield, it communicates with the microwave antenna in the ETC lane at toll stations. Using computer networking technology, it settles transactions with the bank in the background, allowing vehicles to pass through highway or bridge toll stations without stopping to pay tolls. Benefits of installing ETC: Time-saving: Eliminates the hassle of waiting in line; Green and eco-friendly: Promotes low-carbon travel by reducing noise, exhaust emissions, and pollution as vehicles pass through toll stations without stopping; Cost-saving: Reduces vehicle wear and fuel consumption by minimizing the frequency of starting and braking, and users can enjoy toll discounts; Improved efficiency: ETC lanes can theoretically increase traffic efficiency by 2-3 times, making traditional ETC more updated, faster, and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous.

11

3

Share

How to reset the maintenance light on Maxus G50?

Turn on the ignition, then press and hold the reset button on the instrument panel. Turn off the ignition while keeping the reset button pressed. Continue holding the reset button until the clock and mileage display on the instrument panel completely disappear, then release the button. Press and hold the reset button again, turn on the ignition, and the maintenance reminder light will start flashing. Keep holding the reset button until the maintenance reminder stops flashing, then release the button to complete the maintenance light reset. Additional information is as follows: 1. Maintenance reminder: The original purpose of the vehicle maintenance light is to remind the owner to perform maintenance as soon as possible. When the maintenance reminder light comes on, the owner should schedule maintenance promptly. After maintenance is completed, the service staff will use a diagnostic tool to reset the maintenance light. The fastest and most accurate method to clear the maintenance reminder light is by using a professional diagnostic tool, which individuals typically don't possess. It's recommended to have the reminder light cleared at a 4S shop after maintenance or at an external repair shop. 2. Maintenance reminder function: This serves only as an auxiliary function. The detailed maintenance intervals should still follow the maintenance regulations. If the car battery is disconnected for an extended period, the system may not correctly calculate the time for the next maintenance due.

20

0

Share

Where to Add Windshield Washer Fluid in Mercedes-Benz C-Class?

Mercedes-Benz C-Class windshield washer fluid is added at the rear side of the engine hood pressure strut, with a washer symbol on the cap. The washer fluid capacity for the Mercedes-Benz C-Class is 4L, and it should be added appropriately based on the remaining amount. Windshield washer fluid is a consumable item with no fixed replacement cycle, depending on the driver's frequency of use. Precautions for adding windshield washer fluid: Concentrated windshield washer fluid needs dilution: If the purchased windshield washer fluid is concentrated, it must be diluted before use. Carefully read the instructions for the windshield washer fluid and dilute it according to the specified ratio in the instructions. Exercise caution during use. Pay attention to the capacity of the windshield washer fluid: Different brands of windshield washer fluid can be used in varying ranges, with some suitable for 1L and others for 5L. For more accurate measurement, it is recommended to use a measuring cup or bottle with volume markings to achieve better preparation. Different types of windshield washer fluid for winter and summer: Summer windshield washer fluid mainly provides anti-insect effects due to the abundance of mosquitoes in summer; in winter, it is best to choose some anti-freeze windshield washer fluid because of the cold weather that can easily cause freezing.

13

1

Share

What are the warning symbols on the car dashboard?

What does it mean when the EPC light is on and the JAC truck cannot move?

Yaris L Maintenance Schedule Overview?

What causes the Chery Tiggo to have sluggish acceleration and a muffled sound?

How often should ETC be charged?

How to reset the maintenance light on Maxus G50?

Where to Add Windshield Washer Fluid in Mercedes-Benz C-Class?

What causes the dashboard light to come on when stepping on the brake?

What does the National III standard refer to?

Where is the memory card located in a dash cam?

What is the tire size for the Elantra?