What are the warning lights on the car dashboard?

1 Answers
PenelopeDella
07/29/25 9:20pm
Car dashboard warning lights include the engine oil warning light, engine fault warning light, coolant temperature warning light, brake system warning light, tire pressure warning light, etc. When a warning light illuminates, it indicates a corresponding issue. Car dashboard warning lights: Engine oil warning light; The oil light is a safety alarm device for the engine lubrication system. If the oil light flashes while driving, the engine must be turned off immediately for inspection. Continuing to drive may cause engine damage and compromise driving safety. Engine fault warning light; The engine fault signal is issued by the engine control unit (ECU), which manages all electronic components of the engine, such as the electronic throttle, fuel injectors, alternator, fuel pump, etc., covering systems like intake, exhaust, fuel, ignition, and timing. Coolant temperature warning light; When this light turns on, it usually indicates overheating. If the coolant temperature reaches 100°C while driving, the temperature warning light will illuminate, commonly referred to as "boiling over." When this happens, pull over safely but avoid shutting off the engine immediately, as overheating can cause engine components to expand and lead to damage upon shutdown. Brake system warning light; This light illuminates when the parking brake is engaged. If it remains lit after releasing the parking brake, it signals a brake system issue, often due to low brake fluid levels or worn brake pads. Continued driving under these conditions risks vehicle integrity and driver safety. Tire pressure warning light; If this light activates, determine whether the pressure is too high or too low. Excessive pressure increases the risk of a blowout, so reduce tire pressure accordingly. Insufficient pressure harms tires and increases fuel consumption—reinflate promptly and inspect for punctures causing leaks. The battery indicator displays the status of the car battery, typically in red or yellow. It lights up during ignition self-check and should turn off after starting. If it stays on, the battery requires inspection or replacement. Power steering fault light; Illumination while driving indicates a malfunction in the power steering system, possibly resulting in reduced or lost assistance. Steering effort will significantly increase, and professional diagnosis is required as this issue cannot be self-repaired. Electronic Stability Control (ESC) indicator; This yellow light shows the ESC system's operational status. Normally, it remains off unless there's a fault or the system is actively engaged.
Was this review help?
11
3
Share
More Forum Discussions

Why does the speedometer sometimes work and sometimes not?

When the speedometer in a car sometimes works and sometimes doesn't, it is necessary to check whether the speed sensor is damaged, check if the sensor plug is loose, check if there is a fault in the sensor drive mechanism, and check whether there are any fault codes in the vehicle's wheel speed sensor and ABS control unit system. The fault may also be caused by the speedometer itself inside the instrument panel or a loose instrument panel plug. The instrument panel can be diagnosed using a fault diagnostic tool to retrieve fault codes or perform an action test to determine if the issue lies with the speedometer itself. Below is more information about speedometers: 1. What is a speedometer: A speedometer, also known as a speed indicator. It indicates the vehicle's driving speed through the pointer on the speedometer. The speedometer displays instantaneous speed, not the total mileage. 2. How does a speedometer work: The speedometer's indication relies on the speed sensor, which is installed on the transmission. Different rotation speeds produce different pulse signals, which are then converted into pointer output, displaying the current speed. Regulations require that the speedometer display a slightly higher speed than the actual speed for safety reasons. 3. Actual difference: There is a formula in the national standard: 0 ≤ displayed speed - actual speed ≤ actual speed / 10 + 4. In simple terms, there are two meanings: First, the displayed speed must be greater than the actual speed; Second, the allowable error is "actual speed / 10 + 4".
9
1
Share

Is it serious if oil enters the antifreeze in a Maserati GTV8 4.2?

The presence of floating oil or oil droplets in antifreeze is quite normal and not a cause for excessive concern. However, if there is a significant amount of oil, the situation requires further attention. In such cases, it is necessary to check whether the engine cylinder gasket is damaged. Additionally, there might be issues with the oil cooler or filter, or it could be due to seal aging. Therefore, when this occurs, it is advisable to visit the nearest auto repair shop for an inspection as soon as possible. Additional Information: Precautions for using antifreeze: 1. Try to use the same brand of antifreeze: Different brands of antifreeze use different metal corrosion inhibitors, so they should not be mixed. 2. The shelf life of antifreeze is usually two years: When adding antifreeze, ensure the product is within its validity period; when replacing, drain the old fluid completely, clean the cooling system thoroughly, and then add new fluid. 3. Avoid diluting with water: Traditional inorganic antifreeze should not be diluted with water, as this can cause sediment to form, severely affecting the antifreeze's normal function. Organic antifreeze can be diluted with water, but the amount of water should not be excessive. 4. Flocculent sediment: Some antifreeze may develop small amounts of flocculent sediment after being stored for a year. This is usually caused by the precipitation of additives and does not mean the antifreeze should be discarded. However, if large amounts of granular sediment appear, it indicates the antifreeze has deteriorated and should no longer be used.
17
3
Share

How to reset the maintenance reminder for a Mercedes-Benz Smart?

Mercedes-Benz Smart maintenance reset method is as follows: 1. Turn the ignition switch to position 1, while holding down the right-hand phone call answer button and the left-hand OK button. 2. Turn the ignition switch to position 2, hold down the OK button, and release the reset button to complete the reset. Below is some information about the Mercedes-Benz Smart: 1. The Smart is a compact family car from Mercedes-Benz, featuring a small size and low displacement. It is equipped with a 1.0-liter naturally aspirated engine and a turbocharged engine, with maximum power outputs of 70 horsepower and 84 horsepower, and peak torques of 92N•m and 120N•m, respectively. 2. All Smart models are paired with a 5-speed AMT transmission.
20
1
Share

How to Reset the Tire Pressure Warning on Lavida?

Specific steps to reset the tire pressure monitoring light on Volkswagen Lavida are as follows: 1. Depress the brake pedal of the Volkswagen Lavida. 2. Press the one-touch start button of the Volkswagen Lavida. 3. The dashboard of the Volkswagen Lavida will light up, indicating that the vehicle's power is fully connected. 4. Inflate all four tires of the Volkswagen Lavida to the standard pressure. 5. Press and hold the tire pressure reset button located on the left-hand control panel of the steering wheel for 3 seconds to complete the reset. Usage: To use the tire pressure monitoring system on the Volkswagen Lavida, simply check the tire pressure status and adjust the tire pressure via the tire pressure monitoring display on the dashboard, where the corresponding buttons are located.
15
1
Share

What are the cargo compartment dimensions of the Dongfeng Xiaokang C31?

The cargo compartment dimensions of the Dongfeng Xiaokang C31 are 2900mm × 1540mm × 370mm. Below is a partial introduction about the Dongfeng Xiaokang C31: 1. Exterior Design: The front face of the vehicle features a relatively rounded design, with two chrome-plated front grilles perfectly integrated with the headlights. 2. Cargo Capacity: This model removes the second-row seating space, further increasing the length of the cargo compartment, which can meet the demand for loading more and longer items. 3. Powertrain: The vehicle is equipped with a 1.2-liter naturally aspirated engine, model DK12-05, paired with a 5-speed manual transmission.
10
3
Share

What is the Career Level System and Compensation at XPeng Motors?

XPeng Motors' career level system includes positions such as Store Manager, Electrical R&D, Quality Inspection, Process Engineer, Project Manager, Sales, Logistics Management, Human Resources, Maintenance, Hardware Testing, Insurance Sales, Product Engineer, and Software Technical Support. Compensation typically includes a fixed salary, but it also depends on performance. Here are some advantages of working at XPeng Motors: 1. Extremely fast-paced work environment: Proposals and ideas are acted upon decisively. 2. Egalitarian corporate culture: XPeng's corporate culture is referred to as the 'classmate culture,' which emphasizes equality. Employees address superiors by their first names, including the Chairman He Xiaopeng, who can be called 'Xiaopeng' instead of 'Chairman He.'
19
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.