What are the vision requirements for the C1 driver's license physical examination?

2 Answers
McEmersyn
07/29/25 3:32am
For the C1 driver's license physical examination, the naked or corrected vision of both eyes must reach 4.9 or above on the logarithmic visual acuity chart. The following are the vision requirements for a driver's license: 1. Regulations: For applying for large passenger vehicles, tractors, city buses, medium-sized passenger vehicles, large trucks, trolleybuses, or tram driving licenses, the naked or corrected vision of both eyes must reach 5.0 or above on the logarithmic visual acuity chart. For other driving license types, the naked or corrected vision of both eyes must reach 4.9 or above on the logarithmic visual acuity chart. 2. Others: For those with monocular vision impairment, if the naked or corrected vision of one eye reaches 5.0 or above on the logarithmic visual acuity chart, and the horizontal field of vision reaches 150 degrees, they can apply for a motor vehicle driver's license for small cars, small automatic transmission cars, low-speed trucks, three-wheeled cars, or special small automatic transmission passenger cars for the disabled.
Was this review help?
3
3
Share
LouisDella
08/12/25 7:21am
As someone who just passed the C1 driver's license test, let me share my personal experience with the vision test part. During the medical check-up, they used the standard logarithmic eye chart where you stand at a designated distance to identify E letters facing different directions. The doctor required that monocular vision (either naked eye or corrected) must reach at least 4.9 or above, which is approximately 0.8 on the decimal acuity chart - equivalent to being able to clearly see license plates at a certain distance. They also check for color vision to ensure no color blindness or weakness, otherwise you couldn't distinguish traffic lights. I wore glasses during my test and passed without issues. Poor vision can be very dangerous while driving, such as difficulty seeing pedestrians or road signs, which may lead to accidents. So I recommend avoiding excessive late-night TV watching before the license test to maintain healthy vision, and eating more carrots for eye protection in daily life.
Was this review help?
20
4
Share
Expand All
More Forum Discussions

How to Adjust a Sagging Car Door by Yourself?

Here are the methods to adjust a sagging car door by yourself: 1. The entire door is offset downward: When this problem occurs, you need to loosen the hinge screws on the body side and raise the installation position of the hinges, which will lift the entire door upward. 2. The rear end of the door drops: When this problem occurs, loosen the hinge screws on the body side, then move the hinges backward, and finally move the lower hinge backward. Adjusting the hinges requires certain skills and experience, so it is not recommended for car owners to perform the repair themselves. It is best to go to a professional repair shop for inspection and repair.
5
1
Share

What needs to be repaired when a diesel engine overheats?

If the cylinder head gasket is damaged, directly replace the cylinder head gasket and resurface the cylinder head; replace the engine oil and thermostat. Below is an introduction to the related content: 1. Engine overheating: Thermal expansion and contraction cause the cylinder block space to shrink, leading to cylinder block wear, piston ring breakage. If the piston seizes and causes cylinder seizure, it will result in piston connecting rod deformation and throttle damage. 2. Cylinder head gasket damage: Causes damage to the cylinder head gasket (the gasket between the engine block and cylinder head), resulting in mixing of coolant and oil passages, thereby damaging the radiator and catalytic converter, and potentially causing cylinder head deformation. It may also damage the thermostat valve and temperature sensor.
15
1
Share

How to Repair a Small Scratch on the Car Paint?

This type of scratch can be completely removed through polishing. Here are the relevant details: 1. Smooth and glossy paint surface: Polishing utilizes the physical method of cutting, combined with abrasive compounds as the medium, to remove unevenness on the paint surface, thereby achieving a smooth and glossy finish. 2. Polishing: Polishing is a process that removes surface irregularities from the paint. To achieve a more even surface, a portion of the paint is removed, allowing the paint to reflect light at greater angles, making it appear shinier and brighter. Avoid frequent waxing, especially polishing. The number of times a car is polished should not exceed five, and waxing should also be done in moderation.
15
4
Share

What is the equivalent displacement of a 1.2T engine?

1.2T is equivalent to the horsepower output of a 1.6 to 1.8-liter naturally aspirated engine. A 1.2T engine is essentially a 1.2-liter naturally aspirated engine equipped with a turbocharger to enhance its power and torque output. The 'T' primarily increases the power while the displacement remains unchanged at 1.2 liters. A 1.2T engine typically produces around 200 Nm of torque, which can reach the level of a 2.0-liter engine. Similarly, a 1.0T engine still has a displacement of only 1.0 liters and does not increase the actual engine displacement due to turbocharging. Under the same displacement, a 1.0T engine delivers more robust power output compared to a 1.0-liter naturally aspirated engine and can also achieve better fuel efficiency to some extent. Taking Volkswagen's 1.2T as an example, the 1.2TSI engine not only features direct fuel injection technology but also benefits from its four-cylinder structure. While three-cylinder engines are more common in this displacement range, Volkswagen's four-cylinder design avoids issues like idle vibration and excessive noise associated with three-cylinder engines.
6
3
Share

Is a diesel engine oil pressure of 6 bars normal?

Diesel engine oil pressure of six bars is considered high. Below is an introduction to diesel generator-related content: 1. Diesel Engine: A diesel engine is an engine that burns diesel fuel to release energy. Compared to gasoline engines, the biggest advantages of diesel engines are their high torque and good fuel efficiency. Diesel engines and gasoline engines share many similarities in their working processes. 2. Working Process: During operation, the engine goes through four strokes: intake, compression, power, and exhaust. However, diesel engines use diesel fuel, which has higher viscosity compared to gasoline and is less prone to evaporation. Diesel also has a lower auto-ignition temperature than gasoline. 3. Compression Ignition: The formation of the combustible mixture and the ignition method in diesel engines are fundamentally different from those in gasoline engines. Notably, the mixture in diesel engine cylinders is ignited by compression rather than by a spark. During operation, only air enters the cylinders of a diesel engine.
20
4
Share

How to Remove the Hub Center Cap on a Ford Focus?

To remove the hub center cap on a Ford Focus, simply use a flat-head screwdriver to pry it open by aligning it with the notch. The hub is the central part of the wheel where the axle is mounted, commonly referred to as the "wheel rim" or "steel rim." Hubs are prone to accumulating dirt, and if not cleaned regularly, they can corrode and deform, posing safety risks. The differences between steel wheels and alloy wheels are as follows: 1. Advantages: The primary advantage of steel wheels is their simple manufacturing process, typically involving casting techniques. For example, aluminum alloy wheels usually employ low-pressure casting, resulting in relatively lower production costs and strong resistance to metal fatigue. 2. Prone to Rust: Steel wheels are heavier; the same-sized wheel made of steel is significantly heavier than one made of aluminum alloy, leading to greater inertial resistance and poorer heat dissipation. Additionally, steel wheels are more susceptible to rust.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.