What are the vision requirements for driver's license renewal?

1 Answers
DelLila
07/29/25 10:26pm
For driver's license renewal, the vision requirement is that both eyes must have uncorrected or corrected visual acuity of at least 4.9 on the logarithmic visual acuity chart. Additional requirements for driver's license renewal are as follows: 1. Height requirements: No upper limit for small cars and motorcycles, medium-sized buses require a height of 150CM or above, and large buses and heavy trucks require a height of 155CM or above. 2. Vision requirements: Visual acuity in both eyes must not be lower than 0.7 on the standard visual acuity chart or 4.9 on the logarithmic visual acuity chart (correction allowed). No red-green color blindness. 4. Hearing requirements: Must be able to distinguish the direction of sound sources with each ear 50 centimeters away from a tuning fork. 5. Physical requirements: Normal motor ability in limbs, torso, and neck.
Was this review help?
5
0
Share
More Forum Discussions

Can hybrid cars get green license plates?

Hybrid cars cannot get green license plates. Here is an introduction about green license plates for cars: 1. Currently, only three types of vehicles can be registered with green license plates: pure electric, extended-range electric, and plug-in hybrid vehicles. 2. The engines of hybrid electric vehicles still use fuel as the main power source. Only series hybrid passenger vehicles with external charging capabilities are eligible to apply for green license plates, while conventional hybrid electric vehicles do not meet this requirement. Here are the qualification conditions for applying for new energy vehicle license plates: 1. The applicant must be registered in China and have sufficient self-owned capital and financing capabilities commensurate with the project investment. 2. The applying enterprise can only produce pure electric passenger vehicles, including pure electric and extended-range types, i.e., series hybrid passenger vehicles with external charging capabilities, and must meet relevant national standards.
3
3
Share

Is Front-Engine Rear-Wheel Drive the Same as Four-Wheel Drive?

Front-engine rear-wheel drive is not the same as four-wheel drive, as there are clear differences between the two. Here is an introduction to four-wheel drive systems: 1. Four-wheel drive systems are mainly categorized into on-demand four-wheel drive, part-time four-wheel drive, and full-time four-wheel drive. 2. On-demand four-wheel drive is mostly built on front-wheel drive platforms, primarily driven by the front wheels with the rear wheels as auxiliary, and the driving force of the rear wheels will not exceed that of the front wheels. 3. When a part-time four-wheel drive vehicle is manually switched to four-wheel drive, the central drive shaft locks the front and rear axles, causing the front and rear wheels to follow different trajectories during turns. Additionally, most part-time four-wheel drive vehicles lack a central differential, making them potentially harder to operate during turns. 4. Full-time four-wheel drive vehicles offer better off-road performance, strong road passability, and good operability, but they tend to have relatively higher fuel consumption.
16
0
Share

What are the precautions for a new car?

Here are the precautions for a new car: 1. The car needs to warm up after starting. If time permits, warm it up before driving to ensure the engine is fully lubricated. Wait until the engine idle sound stabilizes and the water temperature reaches normal levels before driving. 2. Avoid overloading. In the initial period of a new car, it's best not to carry excessive loads. Do not exceed 80% of the maximum load capacity to reduce the burden on the engine. 3. Shift gears in a timely manner. Do not use the same speed or gear for extended periods. Use gears appropriately to allow each gear to go through the running-in process. 4. Avoid frequent use of emergency braking. This can put a load on the engine and affect the performance of the braking system.
13
1
Share

What brand is Bridge tire?

Bridge is Bridgestone tire, a Japanese tire brand. It is a globally renowned tire manufacturer and one of the world's top three tire giants. Tire maintenance knowledge is as follows: 1. First, choose the appropriate tire. 2. Check tire pressure. The air pressure of all tires, including the spare tire, should be measured when they are cold, and the value should be based on the parameters recommended by the vehicle manufacturer. If any abnormality is found, the cause must be thoroughly investigated. 3. Avoid foreign objects. Pay special attention during driving, as unexpected cuts, incorrect tread matching, and contamination by gasoline or diesel can all reduce tire performance. 4. Prevent tire aging and damage. Since tires are rubber products, care must be taken during driving, parking, or storage to avoid contact with chemicals such as oil, acid, and hydrocarbons, which can cause corrosion, deformation, and softening. When parking, try to avoid direct sunlight to prevent premature aging and damage to the tires.
20
1
Share

What gear should an automatic car use when climbing a slope?

For automatic transmission cars, generally shifting to D gear is sufficient when going uphill. Some cars have D-1 or D-2 gears specifically designed for steep slopes. For cars with manual-automatic transmission, you can use manual mode and shift to 1st gear. Below are some fuel-saving techniques for automatic cars when climbing slopes: 1. When shifting from a higher gear to a lower gear while climbing a slope with a heavy load, do not wait until the car's momentum is lost before shifting. Instead, shift appropriately in advance. Otherwise, it will be difficult to downshift, or even if you do downshift, it may not be the most fuel-efficient speed for that gear. In severe cases, this could lead to stopping on the slope, requiring a restart, which increases fuel consumption. 2. Do not climb a slope at high speed in a low gear. 3. Do not press the accelerator hard to force the car up the slope. 4. Do not accelerate just before reaching the slope to charge up it. Instead, make an appropriate estimate of the slope's size and length in advance, accelerate early, and make full use of the car's momentum to climb the slope. Follow the principle of 'not forcing high gears and not charging hard in low gears' to save fuel.
12
4
Share

Can you change lanes with a solid line and zigzag lines on both sides?

You can change lanes with a solid line and zigzag lines on both sides. The principles and methods for changing lanes are as follows: Principles for changing lanes: Check the mirrors: Be cautious when changing lanes or turning; never do so arbitrarily. Before turning, always observe the situation in the mirrors thoroughly and understand the conditions on both sides and behind the vehicle. Do not turn unless you have a clear view in the mirrors. Methods for changing lanes: Signal early when turning or changing lanes, move to the side in advance, and turn smoothly. Always slow down before entering or exiting non-motorized lanes and yield to vehicles and pedestrians going straight. Slow operation: When exiting a gate or turning from a small road onto a main road, slow down, wait, and ensure you have a clear view of the road conditions on both sides.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.