What are the violations that result in 12-point deductions?

2 Answers
VonGia
07/24/25 11:33pm
Violations that result in 12-point deductions include overloading, etc. Here is a detailed introduction to specific violations that result in a 12-point deduction: Overloading: Operating a commercial passenger vehicle (excluding buses) or school bus carrying more than 20% of the approved passenger capacity. Irregular vehicle license plates: Driving a motor vehicle on the road without displaying a license plate, or intentionally covering, damaging, or improperly installing the license plate, using forged or altered motor vehicle license plates, registration certificates, driving licenses, school bus signs, or using license plates or registration certificates from other vehicles. Speeding: Driving medium-sized or larger passenger or cargo vehicles, school buses, or hazardous material transport vehicles on highways or urban expressways at speeds exceeding 20% of the limit, or driving on other roads at speeds exceeding 50% of the limit, or driving other motor vehicles at speeds exceeding 50% of the limit. Illegal driving: Reversing, driving against traffic, or making U-turns across the central divider on highways, or stopping a commercial passenger vehicle in a highway lane.
Was this review help?
18
1
Share
MiguelMarie
08/10/25 3:26pm
That time I wasn’t paying attention while driving and ended up losing all my points. Later, I learned there are quite a few violations that result in a full 12-point deduction. The most common one is drunk driving—even if you’ve only had a little and drive just a short distance, getting caught means losing all 12 points. Exceeding the speed limit by more than 50 km/h is another surefire way to lose all your points, as is reversing or driving the wrong way on a highway—both are extremely dangerous. If you use fake license plates or deliberately cover them up, the traffic police will definitely deduct all 12 points upon inspection. Hit-and-run cases are even more severe—whether you hit a person or another car, fleeing the scene without handling it counts as a 12-point deduction, even if it’s not a criminal offense. The most easily overlooked violation is fatigued driving—driving a large passenger vehicle for more than four hours without rest also results in a full deduction. I recommend checking the rules before driving to avoid ending up like me.
Was this review help?
3
3
Share
Expand All
More Forum Discussions

How Long Does It Take to Receive a Red Light Violation Notification?

After running a red light, the violation notification SMS is usually received within 3 to 7 days, with a maximum delay of around 13 days. However, some cities now offer "instant electronic police capture alerts," where you may receive an SMS notification within 5-10 minutes of being captured. Note that this alert does not confirm a violation; it merely serves as a capture notification. The final determination of whether a violation occurred takes 3-7 days. If a violation is confirmed, a follow-up SMS will be sent. For violations captured by surveillance cameras, vehicle owners typically do not receive an immediate notification. There is usually a delay, which can vary in duration. This is because after the electronic camera captures the violation, the relevant information must be transmitted through a dedicated channel to the traffic police management center. The data is then compiled and reviewed by relevant personnel. If confirmed as a violation, the system automatically retrieves the vehicle owner's phone number based on the license plate information and sends the violation details via SMS. After receiving the violation SMS, the vehicle owner must visit the local traffic police department to address the issue within one month before the vehicle's annual inspection. Generally, if no violation SMS is received within 15 days of the suspected violation, it is likely that no violation was recorded. Traffic Violation Query Methods: Traffic violation queries refer to checking motor vehicle violations of traffic regulations via the internet or query terminals. There are five main methods: traffic branch terminal queries, vehicle violation website queries, phone queries, SMS queries, and mobile app queries. Website Query: Search for "vehicle violation query" and enter your vehicle details. Phone Query: Call local 114 (area code + 114) or 12580 to confirm violations. Violations can only be processed at the location where they occurred or at the vehicle's license plate issuance office. For on-the-spot violations (e.g., those caught directly by traffic police), they must be handled at the violation site. SMS Query: Open your phone's messaging app, compose a message with "WZ [license plate number] [plate color]," and send it to 1062650001. Mobile App Query: Open the "Traffic Management 12123" app, select "Violation Query," and clear any unresolved violations. Terminal Query: Visit the local traffic branch office and use the touch query terminal.
2
3
Share

How to Use the Lights on the Atenza?

Atenza's light usage method: The light control lever is located on the left side of the steering wheel. Rotating the knob on the light lever to the AUTOF position activates the automatic light mode. The middle knob is the fog light switch. Pushing the light lever up or down operates the turn signals. Pushing the lever forward keeps the high beams on continuously, while pulling it backward activates a single high beam flash. The Atenza is a mid-size car under FAW Mazda, with body dimensions of 4870mm in length, 1840mm in width, and 1445mm in height, and a wheelbase of 2830mm. The Atenza is equipped with 2.0L and 2.5L naturally aspirated engines. The 2.0L engine has a maximum power of 116 kW and a maximum torque of 202 Nm; the 2.5L engine has a maximum power of 141 kW and a maximum torque of 252 Nm.
4
2
Share

What material is the fuel tank of the Baojun 310w made of?

The fuel tank of the Baojun 310w is made of sheet metal. Automobile fuel tank materials are divided into two types: steel fuel tanks and aluminum alloy fuel tanks. The original fuel tank capacity of the Baojun 310w is 40L, which is moderately sized and sufficient for household use. Under normal circumstances, a full tank can run for 400 to 500 kilometers. The Baojun 310w is a five-door, five-seater station wagon equipped with two engines: a 1.2-liter naturally aspirated engine and a 1.5-liter naturally aspirated engine. Like other Baojun models, the 310w is equipped with rich configurations, including safety features such as ABS with EBD, tire pressure monitoring, heated exterior rearview mirrors, rear parking radar with reversing camera, and ISOFIX child seat anchors.
5
0
Share

How to Turn on the Heater in an Audi A6L?

Audi A6L heater activation method: Simply press the AUTO button on the air conditioning panel to turn on the automatic air conditioning, then adjust the temperature switch on the panel to the heater setting to control the warmth level, eliminating the need for manual air conditioning settings for airflow direction and intensity. The Audi A6L comes standard with the Audi Virtual Cockpit across all trims, featuring a 10.1-inch display screen inside the car, with an 8.6-inch touchscreen below. The instrument cluster uses a 12.3-inch full LCD display. The new generation models are equipped with the latest MMI system, offering intelligent search suggestions, voice control, Car-to-X services, and other features.
8
3
Share

What is the wheelbase of the GAC Toyota ix4?

The wheelbase of the GAC Toyota ix4 is 2640 mm, with a length, width, and height of 4525 mm, 1852 mm, and 1685 mm respectively. It is a five-seater model. The GAC Toyota ix4 is a single-motor vehicle, equipped with only one motor on the front axle. The front suspension of the GAC Toyota ix4 is a MacPherson independent suspension, while the rear suspension is a multi-link independent suspension. The front face of the GAC Toyota ix4 features a continuous integrated grille design, providing a horizontally extended visual effect that emphasizes its EV characteristics. The blue strips in the upper and lower grilles create a current-like appearance. The daytime running lights innovatively adopt an L-shape, echoing the L-shaped fog lights at the rear.
12
0
Share

When Can I Take the Subject 4 Test After Passing Subject 3?

After passing Subject 3, the timing for the Subject 4 test falls into three scenarios: taking it directly on the same afternoon; within 9 days without needing an appointment, where you can take the Subject 4 test at the designated location by presenting your ID within 9 days of passing Subject 3; or scheduling after 10 days, with the success of the appointment depending on the current number of examinees, student priority, and temporary arrangements at the test center. Subject 4, also known as the Subject 4 theoretical test or driver's theoretical test, is part of the motor vehicle driver's license assessment. It includes requirements for safe and civilized driving operations, knowledge of safe driving under adverse weather and complex road conditions, emergency handling methods for situations like tire blowouts, and post-accident handling knowledge. Subject 4 Test Notes: Test Duration: The test lasts 45 minutes, and making 12 mistakes (6 questions) during the test will terminate the session. Number of Questions: Depending on the type of driver's license being tested, 50 questions are proportionally selected from the corresponding Subject 4 question bank, with each question worth 2 points. Question Types: The test includes single-choice questions (including true/false questions) and multiple-choice questions. Questions 1-10 are true/false; questions 11-40 are single-choice; and questions 41-50 are multiple-choice. The test also includes animated questions, image-based questions, scenario recognition questions, and text-based questions. Retake Notes: If you fail Subject 4, you only need to retake Subject 4. The driving school will schedule the retake, with no limit on the number of retakes. You can retake it until you pass, and no retake fees are required for Subject 4. Subject 4 Test Tips: Strengthen weak areas by identifying the reasons for mistakes. For marked questions, don't just memorize the correct answer. Instead, consult regulations, textbooks, or reference materials to understand and digest the reasons behind the errors. Categorize and summarize questions. Refer to the question bank analysis for classification and identify similar questions: many questions in the bank are similar and easily confused, so they should be analyzed and grouped. For example, traffic signs for walking, pedestrian crossings, and pedestrian warnings have similar patterns and can be confusing. Grouping them during study helps avoid mistakes. Find memorization techniques: Many questions in the bank involve numbers. Summarizing these numbers can make them easier to remember. The driving test consists of three subjects: Subject 1, Subject 2, and Subject 3, with Subject 3 divided into two parts. Subject 4 is the colloquial name for the Subject 3 Safe and Civilized Driving Knowledge Test and is not a separate subject. Subject 1 refers to the test on road traffic safety laws, regulations, and related knowledge; Subject 2 refers to the field driving skills test; and Subject 3 refers to the road driving skills and safe and civilized driving knowledge test. The safe and civilized driving knowledge test is conducted after Subject 3.
1
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.