···
Log in / Register

What are the violations that deduct 6 points in Subject 1?

3 Answers
BenjaminAnn
08/26/25 5:44am
In Subject 1, 6 points will be deducted for the following violations: driving medium-sized or larger passenger or cargo vehicles, school buses, or hazardous material transport vehicles exceeding the speed limit by less than 20% on highways or urban expressways; other vehicles exceeding the speed limit by 20%-50%. For commercial passenger vehicles and school buses, carrying passengers exceeding capacity by less than 20%; for other vehicles, exceeding passenger capacity by more than 20%. Documents required for Subject 1 exam: Only an ID card is needed for the Subject 1 exam. Note that an expired ID card cannot be used. Exam procedure: Follow the staff's instructions to collect your driving training file in order at the waiting area; carry and present your ID card for inspection by the supervising officer; mobile phones must be turned off when entering the exam area; no loud noise is allowed in the exam area; regulation textbooks are not allowed in the exam area (or should be kept in your bag); after the exam, keep your ID card safe and submit the file to the "Document Submission Window" at the front of the exam room; candidates who pass the exam should sign under the guidance of the staff at the exit before leaving; candidates who fail the exam can leave immediately and wait for the driving school staff to notify them of the retake time.
Was this review help?
16
5
Share
MacRachel
09/08/25 8:06am
Learning about the 6-point deduction behaviors in the Subject 1 test is crucial. I remember needing to understand this before getting my driver's license. For example, failing to yield to a school bus as required while driving will definitely result in a 6-point deduction—this is directly related to children's safety. Additionally, violating prohibited line markings, such as making a turn or U-turn over a solid line, will immediately cost you 6 points. Illegal parking on highways is even more common, and I've seen many beginners make this mistake. Moreover, speeding over 20% but not exceeding 50% also leads to a 6-point deduction—being in too much of a hurry can easily land you in trouble. Overloading passengers beyond 20% of the vehicle's capacity also counts as a 6-point deduction. These rules are in place to remind everyone to follow order, and mastering them is essential for passing the test smoothly.
Was this review help?
15
3
Share
Expand All
Aubree
10/22/25 8:13am
Just finished Subject 1, and I still remember these 6-point deduction behaviors. The most common ones include: failing to yield to school buses (6 points deducted, as it can easily cause accidents), improperly crossing prohibited lines (6 points deducted, don't run through intersections recklessly), stopping on the highway without reason (direct 6-point deduction), exceeding the speed limit by more than 20% (6 points deducted, so always keep an eye on the speedometer), and carrying more than 20% over the passenger limit (same point deduction). These details are emphasized in the driving test materials, and I rely on practicing more mock questions during revision to avoid mistakes.
Was this review help?
16
2
Share
Expand All
More Forum Discussions

How Fast Can a 110cc Motorcycle Go?

It depends on the specific model. Currently, most 110cc motorcycles sold in the market are underbone models, and their top speeds vary. The fastest can reach 100–110 km/h, while more commonly, underbone motorcycles can only reach around 80–90 km/h. Below is an introduction related to engine displacement: Engine Displacement and Cars: The volume of space the piston moves from top dead center to bottom dead center is called the cylinder displacement. If the engine has multiple cylinders, the sum of the working volumes of all cylinders is called the engine displacement, usually expressed in liters (L). Engine displacement is one of the most important structural parameters, more representative of engine size than bore and cylinder count. Many engine metrics are closely related to displacement. Displacement Classification: In China, passenger car classification is determined by engine displacement. Micro cars have a displacement of ≤1.0L; compact cars range from 1.0–1.6L; midsize cars range from 1.6–2.5L; executive cars range from 2.5–4.0L; and luxury cars have a displacement >4.0L.
10
4
Share

Is it harmful for a 125cc scooter to run at 90km/h?

125cc motorcycles are not suitable for prolonged continuous high-speed operation at 90km/h, which is not beneficial for the engine. Precautions for riding a scooter: Choose mineral oil: It is not recommended to use fully synthetic lubricating oil, mainly because the oil change cycle during the break-in period is relatively short, and using fully synthetic lubricating oil would be somewhat wasteful. Ordinary high-quality mineral lubricating oil can meet the basic lubrication needs of a scooter engine. Change lubricating oil: During the break-in period of a scooter, apart from changing the lubricating oil, the main things to pay attention to are controlling the engine speed and maintaining a reasonable speed. Oil lubrication: The operation of the engine depends on the lubrication of the oil; otherwise, it will cause dry friction, and the internal parts of the engine will quickly wear out and fail prematurely.
15
0
Share

Is it okay not to downshift when emergency braking on a motorcycle?

When emergency braking on a motorcycle, it is actually acceptable not to downshift. This approach can utilize engine braking to shorten the braking distance and prevent loss of control. At worst, the engine may stall, but there are no other adverse consequences. Here are some key points to note about emergency braking on a motorcycle: Use both front and rear brakes simultaneously during emergency braking: Applying both brakes together is an effective method for achieving short-distance emergency stops. The primary braking force on a motorcycle comes from the front brake, which provides approximately 70% of the stopping power. However, 70% alone is insufficient; adding the braking force from the rear brake significantly enhances the overall braking effect. Pay attention to downshifting during braking: If there is sufficient braking distance and the rider can react in time, it is recommended to downshift after slowing down. If the rider is already in first gear during an emergency, they should maintain that gear. Additionally, it is best practice to downshift to first gear before coming to a complete stop each time.
20
1
Share

Where to Adjust for Motorcycle Lacking Power on Uphill?

Motorcycle lacking power on uphill can be adjusted at the clutch, because uphill power deficiency is usually due to insufficient power, and the common cause is clutch slippage preventing the engine's power from being normally output, resulting in uphill power deficiency. Function of the Clutch: The clutch is the component in the automotive transmission system directly connected to the engine. Its role is to smoothly engage or temporarily disconnect the engine's power from the transmission, reliably transmitting the engine's torque, facilitating the driver's operations such as starting, stopping, and shifting gears. Clutch Inspection Method: If the clutch pedal has no free play, it will cause clutch slippage, resulting in the vehicle lacking power during driving. If the clutch pedal's free play is too large, preventing the clutch from fully disengaging, it will cause difficulty in shifting gears. During inspection, depress the clutch pedal until resistance is felt. This distance is the clutch pedal's free play. The free play must be within the specified limit range of 6-13mm. If it does not meet the specifications, it should be repaired at a service station.
8
5
Share

What is the service life of a motorcycle?

Motorcycles have a service life of 10 years. Below is a detailed introduction to motorcycles: Motorcycle inspection requirements: The inspection can be extended for 3 years, but during this extension period, the motorcycle must undergo a semi-annual inspection. Only after passing the inspection can the extension be granted. After reaching 13 years of service, the motorcycle must be mandatorily scrapped. Motorcycle scrapping criteria: Light two-wheeled motorcycles, light three-wheeled motorcycles, two-wheeled motorcycles, and sidecar motorcycles with a cumulative mileage of 100,000 kilometers; three-wheeled motorcycles with a cumulative mileage of 80,000 kilometers; light two-wheeled motorcycles, light three-wheeled motorcycles, two-wheeled motorcycles, and sidecar motorcycles with a service life of 10 years; three-wheeled motorcycles with a service life of 9 years must be scrapped. Vehicle deregistration: If the motorcycle owner fails to complete the deregistration of the vehicle on time, the traffic management department of the public security authority will legally cancel the vehicle's registration certificate, license plate, and driving license, and will impound, penalize, and confiscate any motorcycles that continue to be driven on the road.
19
0
Share

What is the difference between a pushrod engine and a chain-driven engine in motorcycles?

Motorcycle pushrod engines and chain-driven engines differ only in the structure of their valve trains, and there is no inherent relationship with torque levels. Below are the relevant introductions: Chain-driven engine structure: Structurally speaking, chain-driven engines are more advanced. Chain-driven engines can increase power by raising the engine speed under the same displacement. They are compact, lightweight, have lower mechanical loads, precise ignition timing, and can integrate many advanced technologies. Therefore, high-performance, large-displacement sports bikes mostly use chain-driven engines, but they also demand higher manufacturing technology. Pushrod engine structure: Pushrod engines themselves are not suitable for high-speed operation, so they play to their strengths by typically designing the cylinder with a small bore and long stroke. This increases torque and avoids the drawbacks of high-speed operation. At medium to low speeds (commonly used range), they provide strong torque, powerful acceleration, excellent climbing performance, and good practicality.
2
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.