What are the vehicle inspection items?

What is the top speed of the Bin Yue?

The official top speed of the Bin Yue can reach 150km/h, with a 0-100km/h acceleration time of just 7.9 seconds. Introduction to the Geely Bin Yue: 1. Exterior design: It adopts Geely's latest family design language—the Time Racing Aesthetics concept, featuring a youthful, fashionable, and powerful overall appearance. 2. Body dimensions: The length, width, and height are 4330mm, 1800mm, and 1609mm respectively, with a wheelbase of 2600mm. 3. Interior: The interior color options include black, black with brown, and black with red.

18

5

Share

Which country does the Hongqi car belong to?

Hongqi is a premium brand directly operated by China's FAW Group. Here are some details about Hongqi vehicles: 1. The dimensions of the Hongqi E-HS9 2021 model are 5209mm in length × 2010mm in width × 1722mm in height. 2. The wheelbase of the Hongqi E-HS9 2021 model is 3110mm. 3. The minimum ground clearance of the Hongqi E-HS9 2021 model is 179mm. 4. The maximum power output of the Hongqi E-HS9 2021 model's engine is 405kW, with the front motor delivering a maximum torque of 300Nm.

1

2

Share

Should You Press the Brake Pedal or the Clutch Pedal in a Manual Transmission Car?

To start a manual transmission car, you need to press the clutch. First, ensure the handbrake is engaged, check that the gear lever is in the neutral position, press the clutch pedal all the way down with your left foot, and then start the engine. Each starting attempt should not exceed 5 seconds. Once the engine stabilizes at idle speed, you can begin driving. The clutch is part of the car's transmission system, connecting or disconnecting the engine from the gearbox. When the driver presses the clutch pedal, the clutch disengages. When the pedal is released, the clutch engages. The clutch is located between the engine and the gearbox. The clutch pressure plate is fixed to the engine's flywheel, with the clutch disc positioned between the pressure plate and the flywheel. The clutch disc has a spline that secures a driveshaft, which serves as the gearbox's input shaft. The clutch disc is a wear-and-tear component that requires periodic replacement. As the car's mileage increases, the clutch disc gradually wears out. Once it wears beyond a certain point, it must be replaced. Failure to do so can cause the clutch to slip, preventing the engine's power from fully transferring to the gearbox, resulting in insufficient power. Advantages of pressing the clutch when starting: Pressing the clutch while starting is primarily for safety. Many drivers turn off the engine and exit the car without shifting to neutral. If the clutch isn't pressed during ignition in such cases, the car may lurch forward, posing a significant hazard. Pressing the clutch disconnects the engine from the transmission system, ensuring the car won't lurch even if the gear isn't in neutral. Pressing the clutch while starting also benefits the engine, especially in winter when the gearbox oil is thick. Starting without pressing the clutch increases resistance, placing extra load on the starter motor and draining the battery. This lowers the engine's cranking speed, prolonging startup time or even preventing it altogether. Important considerations when driving a manual transmission car: Avoid pressing the clutch pedal when not shifting gears. Some drivers keep their foot on the pedal after shifting, which can cause the release bearing to overwork if the clutch is set too low. Over time, this can damage the release bearing and subsequently the pressure plate. Finding the clutch's engagement point is crucial when driving a manual car. As you approach this point, release the clutch slowly while pressing the accelerator to achieve smooth coordination. During driving, the coordination between the accelerator and clutch should adjust with speed. As speed increases, the driver's reaction time decreases, meaning the clutch must be released quickly. Additionally, to ensure smooth gear shifts, avoid pressing the accelerator unnecessarily during the process.

20

4

Share

What is the method for resetting a car's throttle body?

Car throttle body reset method is: turn the ignition key on and off several times in succession, the vehicle's computer will delete the original throttle memory and store new throttle data. Start the vehicle and ensure it runs normally. The throttle body is a controllable valve that regulates air intake into the engine. After entering the intake pipe, the air mixes with gasoline to form combustible mixture for combustion. The cleaning steps for throttle body are: 1. Turn off ignition switch and remove battery negative terminal; 2. Remove throttle cable, intake hose, and throttle mounting screws in sequence; 3. Clean throttle with cleaner, using cotton swabs for hard-to-reach areas.

16

1

Share

What is generally used to detect cylinder pressure?

It can be detected using a cylinder pressure gauge. The method for measuring cylinder pressure with a cylinder pressure gauge is as follows: 1. Run the engine until it reaches normal operating temperature, with coolant temperature between 85-95°C. 2. Remove all spark plugs or fuel injectors, and ground the high-voltage wires. 3. Fully depress the accelerator pedal to open the throttle completely. 4. Press the conical rubber adapter of the cylinder pressure gauge tightly into the spark plug hole of the cylinder being tested, or screw the threaded adapter into the spark plug hole. 5. Crank the starter for 2-3 seconds until the gauge needle stabilizes, then read the measurement. Press the one-way valve to reset the gauge needle. Each cylinder should be measured at least twice.

6

2

Share

Do All Turbocharged Engines Burn Oil?

Not all turbocharged engines burn oil, but turbocharged engines operate at significantly higher temperatures, which leads to some oil consumption and makes them more prone to burning oil compared to naturally aspirated engines. Below is more information about turbocharged engines: 1. The pressure and temperature during operation are significantly higher, resulting in a shorter lifespan compared to non-turbocharged engines of the same displacement. Increased pressure directly causes higher temperatures, thinning the engine oil under heat. Under high temperature and pressure, the oil is more likely to vaporize and enter the combustion chamber through the cylinder walls, where it burns along with the fuel. 2. Turbocharged engines can increase air intake without changing displacement by using a turbocharger, thereby enhancing engine power and effectively controlling exhaust emissions.

12

5

Share

What are the vehicle inspection items?

What is the top speed of the Bin Yue?

Which country does the Hongqi car belong to?

Should You Press the Brake Pedal or the Clutch Pedal in a Manual Transmission Car?

What is the method for resetting a car's throttle body?

What is generally used to detect cylinder pressure?

Do All Turbocharged Engines Burn Oil?

What Happens When Transmission Fluid Temperature Is Too High?

Does the ABS yellow light being on affect driving?

Where is the Corolla fire extinguisher placed?

Can a Car Standardly Equipped with 95 Octane Gasoline Use 92 Octane?