What Are the Vehicle Annual Inspection Exhaust Emission Standards?

1 Answers
XavierRose
07/29/25 3:35pm
Here is an introduction to the vehicle annual inspection exhaust emission standards: The emission standards for light-duty vehicles were issued in July 1999 and revised in 2001. 1. GB18352.1-2001 "Limits and Measurement Methods for Emissions from Light-Duty Vehicles (I)" is equivalent to the EU 93/59/EC Directive, referencing part of the technical content of the 98/77/EC Directive, equivalent to Euro I, issued and implemented on April 16, 2001. 2. GB18352.2-2001 "Limits and Measurement Methods for Emissions from Light-Duty Vehicles (II)" is equivalent to the EU 96/69/EC Directive, referencing part of the technical content of the 98/77/EC Directive, equivalent to Euro II, implemented from July 1, 2004. 3. GB18352.3-2005 "Limits and Measurement Methods for Emissions from Light-Duty Vehicles (China III and IV Stages)" is partially equivalent to Euro III and was implemented in 2007.
Was this review help?
13
3
Share
More Forum Discussions

What is the horsepower of the Cummins 3.8 engine?

The horsepower of the Cummins 3.8 engine is 154ps, which adopts the National 5 emission standard. The engine has four valves per cylinder, with a cylinder diameter of 102mm, a piston stroke of 115mm, and a maximum torque of 500 N·m. The methods for engine maintenance are: Regularly change the engine oil and oil filter; Maintain good ventilation in the crankcase; Regularly clean the fuel system; Regularly clean the radiator; Regularly clean the crankcase. An engine is a machine that can convert other forms of energy into mechanical energy, including internal combustion engines, external combustion engines, jet engines, and electric motors.
19
5
Share

How often should the transmission fluid in a CVT gearbox be changed?

CVT gearbox transmission fluid should be changed approximately every 2 to 3 years or 60,000 to 80,000 kilometers. A CVT gearbox, also known as a continuously variable transmission, operates on the principle of replacing traditional gears with a pair of pulleys and a steel belt in the CVT transmission system. Each pulley consists of a V-shaped structure formed by two conical discs, with the engine shaft connected to the smaller pulley, driving the larger pulley via the steel belt. The maintenance methods for a CVT gearbox include: 1. Checking the quality and quantity of the CVT fluid as specified by the manufacturer; 2. Regularly replacing the fluid with the type specified by the manufacturer; 3. Having the CVT gearbox serviced at a professional repair facility.
14
3
Share

How to Turn Off the Vehicle Drive Power System?

The method to turn off the vehicle drive power system is: Press the Traction Control System (TCS) OFF button, and the illuminated button indicator signifies that the TCS system is deactivated. The anti-slip regulation system is an active safety system developed based on ABS, also known as the traction control system. The function of the vehicle drive power system is to enable the vehicle to obtain optimal traction under various driving conditions, preventing potential drive wheel slippage during acceleration or starting. The working principle of the vehicle drive power system involves employing appropriate control algorithms to maintain the slip rate of the drive wheels within an optimal range according to the vehicle's operating conditions. This ensures maximum utilization of the engine's driving torque even on poor road surfaces or complex driving conditions, guaranteeing swift and stable vehicle starting and acceleration processes.
2
1
Share

What happens if the knock sensor is damaged?

The effects of a damaged knock sensor are: causing engine shaking, generating noise, the malfunction indicator light will illuminate, and in severe cases, it may lead to serious damage to the firmware. The reasons for knock sensor damage include: 1. Excessive wear of pistons and cylinders leading to excessive clearance; 2. Pistons installed in the wrong direction or deformed pistons; 3. Poor lubrication of cylinder walls; 4. Bent or twisted connecting rods; 5. Blocked oil passages; 6. Severe carbon buildup in the combustion chamber; 7. Excessive fuel injection advance angle; 8. Excessively fast combustion speed of the combustible mixture, causing excessively high pressure in the cylinder; 9. Cylinder gasket being too thin or excessive wear on the cylinder block top surface, resulting in an increased compression ratio of the diesel engine.
4
4
Share

What does the yellow dotted line on the road mean?

Yellow dotted lines on the road are used to separate lanes of opposing traffic directions. These lines also indicate that crossing the line for overtaking or U-turns is permitted. Double yellow dotted lines represent adjustable lane numbers based on traffic flow conditions. Yellow dotted lines along the roadside indicate no long-term parking is allowed. Below are the driving rules for tidal flow lanes: 1. Observe signage: Tidal flow lane sections usually have corresponding signs. Drivers must clearly read the instructions to effectively avoid violations. 2. Monitor traffic lights: As tidal flow lane signals synchronize with main road signals, when the main road light turns green, the tidal flow lane light will also turn green, permitting entry. 3. Note operational hours: Tidal flow lanes typically operate during morning and evening peak hours (generally 7-9 AM and 5-8 PM), so drivers should pay attention to permitted driving times.
1
3
Share

What to Do When the Gap in the Car's Front Bumper Increases After a Collision?

Solutions for an increased gap in the car's front bumper after a collision: If the decorative hard plastic is cracked, it can only be replaced. For a cracked bumper, the choice between plastic welding and replacement depends on the size of the gap. The cost of plastic welding varies based on the size of the crack. Below is an introduction to car bumpers: Car bumpers (or impact beams) are located in the front and rear areas of the vehicle. They are designed to prevent external damage from affecting the vehicle's safety systems and have the capability to reduce injuries to passengers during high-speed impacts. Modern bumpers are increasingly being designed with pedestrian protection in mind.
15
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.