···
Log in / Register

What are the usage conditions for Borui's cruise control?

5 Answers
VonPaislee
07/29/2025

The usage condition for Borui's cruise control is when the vehicle speed reaches above 40 km/h. Below are the specific details about the cruise control system: 1. Function: The cruise control system, abbreviated as CCS, functions to automatically maintain the vehicle speed once the driver reaches the desired speed, eliminating the need to press the accelerator pedal and allowing the vehicle to travel at a constant speed. When driving on highways for extended periods, this device relieves the driver from controlling the accelerator pedal, reduces fatigue, and minimizes unnecessary speed variations, thereby saving fuel. 2. Road Conditions for Usage: The cruise control system is not suitable for all times and places. In principle, cruise control should be used on highways or fully enclosed roads. This is because on non-enclosed roads, complex road conditions can compromise traffic safety.

Was this review help?
5
5
Share
MaliaLee
08/15/2025

I love using the cruise control most when driving my Borui. Generally, it can only be properly activated when the speed reaches above 40 km/h, making it more suitable for operation on highways. Avoid using it in crowded urban areas or on curves where road conditions are complex and prone to accidents. Weather conditions also need attention; don’t risk activating it during rain, snow, or heavy fog when visibility is poor. Before each use, I make it a habit to check if the system indicator lights up normally and ensure the brakes and tires are in good condition. Other cars like the Geely Emgrand have similar functions, but the Borui responds more steadily. It saves a lot of effort on long drives since you don’t have to keep your foot on the accelerator, but you must always be ready to take over braking—safety comes first, and you can’t fully rely on the system. Regular maintenance, like checking tire pressure and electrical circuits, shouldn’t be overlooked to avoid faults caused by aging fuses. Overall, reasonable use can enhance comfort, but it’s only reliable when conditions are met.

Was this review help?
14
2
Share
Expand All
McCamilla
10/12/2025

I've been using the Geely Borui's cruise control for years, and experience shows it's simple and safe to operate: the vehicle speed must be around 40km/h to activate it, preferably on straight roads or highways, avoiding crowded or mountainous areas. Before activation, check that the vehicle has no abnormal noises or warning lights on; avoid using it in rainy conditions, and cancel it for safety when visibility is poor due to heavy fog. Similar operation applies to the cruise control in a Camry, but the Borui's is more sensitive. Using it on long trips reduces fatigue, giving your feet a rest and easing your mind, but always stay alert to changing road conditions—stepping on the brake immediately deactivates the cruise. It's recommended to regularly maintain the vehicle's braking system to prevent circuit aging from affecting functionality. For safety, avoid prolonged reliance on cruise control on slopes, as speed fluctuations can affect stability. In short, it's very convenient when conditions are met, but don't test it in harsh environments.

Was this review help?
1
1
Share
Expand All
IsabelleRose
11/25/2025

When occasionally using the cruise control on the Borui, the conditions are clear: the speed must reach at least 40 km/h to activate it, making highways more suitable. Avoid using it in urban traffic jams or on winding roads, as it's too dangerous. Do not activate it in adverse weather conditions; it's safer to disable it during rainy or foggy days. Before use, ensure the dashboard indicators are normal and the system is fault-free. Be ready to cancel it with the brake at any time. Other vehicles like the BYD Han have similar cruise functions, but the Borui is easier to operate. Regular maintenance checks on the electrical circuits are necessary to prevent issues.

Was this review help?
3
1
Share
Expand All
Trevor
01/15/2026

I've used the Borui's cruise control multiple times, which requires a speed above 40km/h to activate, working best on highways or flat roads. Avoid using it in heavy traffic or rainy conditions—safety first. When activating, ensure the indicator light displays normally and the vehicle is in good condition without unusual noises. Similar to the Accord's cruise function, but with more intuitive settings. It's a great way to reduce fatigue on long trips, allowing your feet to rest, but always be prepared to brake for emergencies. Exercise caution when tires are worn or aged to avoid loss of control. It's advisable to perform a quick system check before each trip to ensure everything is in perfect working order.

Was this review help?
18
0
Share
Expand All
More Q&A Discussions

How Often Should Brake Discs and Brake Pads Be Replaced?

Under normal circumstances, brake discs should be replaced every 50,000 to 80,000 kilometers, front brake pads approximately every 30,000 kilometers, and rear brake pads around every 80,000 kilometers. Relevant information about the braking system is as follows: Introduction to Brake Discs: Simply put, a brake disc is a round disc that rotates as the vehicle moves. The brake caliper clamps the brake disc to generate braking force. When the brakes are applied, it clamps the disc to slow down or stop the vehicle. Brake discs provide effective braking performance and are easier to maintain compared to drum brakes. Introduction to the Braking System: Automobiles rely on the rotation of their wheels to move on the road. But how do they stop when needed? Drivers can't extend their feet to the ground like in cartoons to halt the vehicle. Instead, the car's braking system is used to reduce speed and bring the car to a stop. The braking system generates friction between the brake pads and the wheel drum or disc, converting the vehicle's kinetic energy into heat during the friction process. Key components of the braking system include the brake disc, brake pads, vacuum booster pump, master brake cylinder, and wheel brake cylinder.
7
2
Share

What Type of Transmission Oil is Used for Manual Transmissions?

Currently, the main types of transmission oil used include DEXRON, DEXRON-Ⅱ, and DEXRON-Ⅲ (produced by General Motors); ATF-F type oil (produced by Ford); and domestically developed No. 8 oil (primarily used in various passenger car hydraulic automatic transmission systems) and No. 6 oil (mainly used in the hydraulic torque converters of locomotives and heavy-duty trucks). Below is an introduction to transmission oil: 1. Transmission oil can clean the vehicle's gear-shifting system and also serves functions such as lubrication, heat dissipation, and sealing. It helps reduce wear and prolong the lifespan of the transmission components. 2. Manual transmission oil, also known as gear oil, is categorized into six grades from GL-1 to GL-6. Among these, GL-1 to GL-3 are more suited for heavy-duty applications but have been phased out of the market. Currently, GL-4 and GL-5 are commonly used in household vehicles. It is important to note that transmission oils should not be mixed, and manual transmissions must use manual transmission oil. 3. If the vehicle experiences issues such as difficulty shifting gears, jerky driving, lack of acceleration, or unusual noises from the transmission, the oil should be replaced promptly. 4. Generally, manual transmission oil should be replaced every 3 years or approximately 80,000 to 100,000 kilometers.
4
3
Share

Which country is Textar brake pads from?

Textar brake pads are from Germany. Textar Group is one of the largest friction material suppliers in Europe. All product development and technical support come from the Textar Group, and the same services are provided in the aftermarket. They are known for their high quality and safety, with no noise or vibration, excellent pedal feel, low wear, and long lifespan. The advantages of Textar brake pads include: 1. Excellent thermal conductivity and heat dissipation; 2. Improved friction stability with a stable friction coefficient; 3. Enhanced initial braking force at low temperatures and stable braking force at high temperatures; 4. Outstanding resistance to fade at high speeds and temperatures; 5. Reduced friction variation; 6. Superior noise and vibration resistance.
16
2
Share

What are the symptoms of a faulty manual fuel pump in a diesel vehicle?

The symptoms of a faulty manual fuel pump in a diesel vehicle include: 1. Abnormal fuel supply from the manual fuel pump, and in severe cases, it may fail to deliver fuel; 2. Reduced fuel supply from the manual fuel pump, mainly due to clogged pump filters or blocked fuel lines; 3. Poor air tightness of the manual fuel pump, caused by aging or damaged sealing gaskets at the connections or loose fuel pipe fittings; 4. The manual fuel pump does not operate smoothly. The manual fuel pump in a diesel vehicle consists of the pump body, rear seat, fuel tank, and handle. The pump body is the core of the manual fuel pump, mainly composed of high and low pressure working chambers, check valves, low pressure valves, pressure relief valves, and backflow valves. The handle's main function is to drive the plunger in a reciprocating motion, thereby increasing the pressure of the fuel to generate oil pressure. The check valve controls the pressure of the high-pressure valve, maintaining it at around 1.5MPa.
15
5
Share

How to Activate the Locking Sound on a Passat?

Method to activate the locking sound on a Passat: 1. Press the brake pedal and place the gear shift lever in P position; 2. Release the brake pedal and press the one-touch start button twice consecutively; 3. Close all four doors, then press and hold the lock button on the driver's door for more than 10 seconds to complete the activation. Taking the Volkswagen Passat 2021 280TSI Business Edition as an example: It is a mid-size car launched by SAIC Volkswagen, with a length, width, and height of 4933mm, 1836mm, and 1469mm respectively, and a wheelbase of 2871mm. It is equipped with a 1.4T turbocharged engine, delivering a maximum power of 110kw, and paired with a 7-speed dual-clutch transmission.
5
1
Share

What procedures are required to change from C2 to C1?

C2 to C1 driver's license upgrade method is as follows: Bring your ID card and C2 driver's license to the vehicle management office service hall to apply for the C1 upgrade business. Fill out the driver application form, pay the relevant examination fees, schedule the specific test dates after payment, and then take the corresponding tests. After passing all the tests, you can complete the upgrade from C2 to C1. Driver's license classifications: A1: Large buses and A3, B1, B2, C1, C2, C3, C4, M A2: Tractor trucks and B1, B2, C1, C2, C3, C4, M A3: City buses and C1, C2, C3, C4 B1: Medium buses and C1, C2, C3, C4, M (Medium buses refer to passenger vehicles with fewer than 19 seats, such as minibuses and vans) B2: Large trucks and C1, C2, C3, C4, M C1: Small cars and C2, C3 (Passenger vehicles with fewer than 9 seats, such as sedans, are considered small cars) C2: Small automatic transmission cars C3: Low-speed trucks and C4 C4: Three-wheeled cars C5: Small automatic transmission passenger cars for disabled people (referring to five types of disabilities: right lower limb disability, both lower limb disabilities, hearing impairment, right thumb missing, or finger end joint defects) D: Regular three-wheeled motorcycles and E E: Regular two-wheeled motorcycles and F F: Light motorcycles M: Wheeled self-propelled machinery N: Trolley buses P: Tramcars
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.