What are the types of garbage trucks?

What is the purpose of the canister purge valve?

The canister purge valve, as part of the engine's gasoline evaporation control system, is installed between the fuel tank and the engine. Its working principle and function involve utilizing activated carbon's adsorption properties to collect fuel vapors during normal engine operation. The roles of the canister purge valve in a vehicle are as follows: 1. Reduce air pollution caused by fuel evaporation emissions from the vehicle. 2. Improve the vehicle's fuel efficiency. Information about the canister purge valve includes: 1. The solenoid valve is an automated fundamental component for fluid control using electromagnetic force, which can be integrated with circuits to achieve desired control. Inside the solenoid valve, there is a sealed chamber connected to different oil pipes, allowing hydraulic oil to enter various pipes, thereby controlling mechanical movement by switching the electromagnet's current on and off. 2. When the engine is turned off, gasoline vapors mix with fresh air inside the canister and are stored in the activated carbon canister. When the engine starts, the solenoid valve of the fuel evaporation purification device, located between the activated carbon canister and the intake manifold, opens, drawing the gasoline vapors from the canister into the intake manifold for combustion.

14

2

Share

What to Do When There is Frost on the Windshield in the Morning?

When there is frost on the car windshield in the morning, the solution is to start the engine and turn on the external circulation system inside the car. Adjust the fan speed to level four or higher, and use the hot air mode to blow on the glass. After a few minutes, the frost on the windshield will be removed. The causes and hazards of frost formation are as follows: 1. When it snows or the air is humid, moisture attaches to the glass and melts. During the melting process, as the temperature inside and outside the car becomes nearly the same, the moisture solidifies into ice beads, forming frost on the glass, which results in frost on the car windshield. 2. In winter, due to low environmental temperatures, frost on the windshield can severely obstruct the driver's view, reducing driving safety.

11

3

Share

When will the National VI emission standard be implemented in Jiangsu Province?

The implementation of the National VI emission standard in Jiangsu Province is carried out in two steps: 1. Starting from July 1, 2019, the National VI a standard was implemented, covering all newly produced light-duty vehicles for sale and registration, as well as all heavy-duty gas vehicles produced, imported, sold, and registered in the province. 2. Starting from July 1, 2023, the National VI b standard will be implemented, which is in accordance with the national standard. Relevant information about the National VI emission standard is as follows: 1. The National VI standard, also known as the "National Sixth Stage Vehicle Pollutant Emission Standard," includes "Limits and Measurement Methods for Pollutant Emissions from Light-duty Vehicles (China VI)" and "Limits and Measurement Methods for Pollutant Emissions from Heavy-duty Diesel Vehicles (China VI)." 2. The National VI standard was issued by the Ministry of Environmental Protection and the General Administration of Quality Supervision, Inspection, and Quarantine on December 23, 2016, and June 22, 2018, respectively. "Limits and Measurement Methods for Pollutant Emissions from Heavy-duty Diesel Vehicles (China VI)" has been implemented since July 1, 2019. The implementation of the National VI standard will impose stricter requirements on pollutants such as carbon monoxide, nitrogen oxides, and hydrocarbons.

19

0

Share

Where is the coolant added in the Cruze?

The coolant filling location for the Cruze is on the right side of the engine. Coolant prevents the freezing of the liquid in the cooling system during cold winter parking, which could otherwise cause the radiator to crack or damage the engine cylinder block or head. Vehicle coolant generally needs to be replaced every 2 years or 40,000 kilometers. This is just a reference interval. For commercial vehicles with longer mileage, the replacement interval should be shorter. Since driving conditions vary for each vehicle, the replacement should be based on actual usage. Check the coolant level regularly and top it up if it's low. If suspended particles, sediment, or discoloration are observed in the coolant, replace it immediately and clean the system. The basic specifications of coolant are its freezing and boiling points. Available coolant freezing points on the market include -15°C, -25°C, -30°C, and -40°C. It's advisable to choose a coolant with a freezing point at least 10°C lower than the lowest temperature in your region. Always use the same brand of coolant. Different brands may have varying formulations, and mixing them could lead to chemical reactions between additives, rendering them ineffective.

5

0

Share

Which one is the accelerator and which one is the brake in a car?

In automatic transmission models, the left pedal is the brake and the right one is the accelerator; in manual transmission models, the middle pedal is the brake and the right one is the accelerator. Since automatic transmission models do not require manual gear shifting and the car shifts gears automatically, there is no clutch pedal, only the accelerator and brake, both controlled by the right foot. During driving, the left foot should not be placed on the brake pedal. Automatic transmission means the driver does not need to manually shift gears; the vehicle automatically selects the appropriate gear based on driving speed and traffic conditions. Manual transmission refers to cars that use a manual gear-shifting mechanical transmission to adjust speed, where the driver must manually move the gear lever to change the gear meshing position inside the transmission, altering the gear ratio to achieve speed variation.

15

5

Share

What is the normal tire pressure for the Vision X6?

The normal tire pressure for the Vision X6 is 2.4 to 2.5 bar. Tire pressure refers to the air pressure inside the tires, which is akin to the blood pressure of a car. The level of tire pressure plays a crucial role in the performance and power of the vehicle. The Vision X6 is a compact SUV with dimensions of 4546mm in length, 1834mm in width, and 1715mm in height, a wheelbase of 2661mm, and a curb weight of 1550kg. In terms of power, the Vision X6 is equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 141 PS, a maximum power of 104 kW, and a maximum torque of 235 Nm, paired with a 6-speed manual transmission.

8

5

Share

What are the types of garbage trucks?

What is the purpose of the canister purge valve?

What to Do When There is Frost on the Windshield in the Morning?

When will the National VI emission standard be implemented in Jiangsu Province?

Where is the coolant added in the Cruze?

Which one is the accelerator and which one is the brake in a car?

What is the normal tire pressure for the Vision X6?

What is the difference between MT and AT in cars?

What does the BMW with three stripes mean?

Should You Press the Accelerator with the Ball of Your Foot or the Toes?

What Are the Black Dots on the Windshield?