What are the two mirrors on the left and right sides of the car called?

1 Answers
KarterDella
07/30/25 9:35am
The two mirrors on the left and right sides of the car are called rearview mirrors, also known as side mirrors. The function of rearview mirrors: They reflect the situation behind, beside, and below the car, allowing the driver to indirectly see these areas clearly, expanding the driver's field of vision, and increasing safety during reversing and driving. The method to adjust the rearview mirrors is: 1. Adjust the horizon image in the left rearview mirror to the center of the mirror; 2. Adjust the image of the left side of the car to occupy one-fourth of the right side of the mirror; 3. Adjust the horizon image in the right rearview mirror to two-thirds of the mirror's height; 4. Adjust the image of the right side of the car to occupy one-fourth of the left side of the mirror.
Was this review help?
16
4
Share
More Forum Discussions

What transmission does the Skoda Superb use?

Skoda Superb uses a 7-speed dual-clutch transmission. The Skoda Superb is a mid-size sedan launched after Skoda was acquired by SAIC Volkswagen. The dimensions of this car are 4869mm in length, 1865mm in width, and 1489mm in height, with a wheelbase of 2841mm. The Skoda Superb is equipped with three types of engines: 1.4TSI, 1.8TSI, and 2.0TSI. Except for the entry-level 1.4TSI model which is paired with a 5-speed manual transmission, all other models use a 7-speed dual-clutch transmission. The car comes standard with features such as a hatchback-style trunk, LED dual C-shaped taillights, front fog lights with cornering function, green heat-insulating glass, and noise-insulating front windshield glass.
9
2
Share

Where is the cabin air filter located in the Volvo S80?

The cabin air filter in the Volvo S80 is located beneath the glove compartment on the passenger side. The replacement method involves removing the screws from the cover panel under the glove compartment, then taking off both the cover panel and the filter cover to access the cabin air filter inside. Simply remove the old filter and replace it with a new one, ensuring to correctly identify the front and back sides during installation. The Volvo S80 is a 4-door, 5-seater sedan under the Volvo brand, with body dimensions of 4851mm in length, 1861mm in width, and 1493mm in height, and a wheelbase of 2835mm. It is equipped with a turbocharged engine, delivering a maximum power of 149kW and a maximum torque of 300Nm.
14
3
Share

What are the body dimensions of the 2020 Haval H9?

The 2020 Haval H9 has body dimensions of 4856mm in length, 1926mm in width, and 1900mm in height, with a wheelbase of 2800mm. The main changes in the vehicle's exterior are concentrated on the front fascia, where the new grille features thicker chrome trim with a dual-slat design. Inside, the 2020 Haval H9's dashboard adopts a traditional symmetrical layout, wrapped in soft-touch materials and accented with chrome trim details. In terms of features, the vehicle is equipped with full-speed ACC adaptive cruise control, collision warning with emergency braking, lane departure warning with lane change assist, L2 autonomous driving, three differential locks, and a CCO low-speed off-road cruise function.
18
1
Share

What is MG?

MG is a British automobile brand, known as 'MG' in China. Taking the MG 6 as an example from the MG lineup, its body dimensions are 4695mm in length, 1848mm in width, and 1462mm in height, with a wheelbase of 2715mm. In terms of exterior design, the MG 6 features a dot-matrix design for the front grille, with the lower part of the grille designed in a trapezoidal shape. The side profile of the car adopts a dual waistline design, with the upper waistline extending from the rear of the headlights to the rear door panel, complementing the downward-sloping roofline. The car is equipped with a MacPherson independent front suspension and a multi-link independent rear suspension. It offers two transmission options: a TST 7-speed dual-clutch automatic transmission and a 6-speed manual transmission.
11
1
Share

Where Should a Dash Cam Be Installed?

A dash cam should be installed below the interior rearview mirror and connected to it, or mounted on the back of the interior rearview mirror. After installation, adjust the angle from the driver's position. A dash cam is a device that records images, sounds, and related information during vehicle travel. Installing a dash cam in a car allows for the recording of the entire driving process, including video and audio, which can serve as evidence in traffic accidents. The basic components of a dash cam include: 1. The main unit; 2. A speed sensor; 3. Data analysis software; 4. An infrared camera. To turn the dash cam on or off, press and hold the power button. It automatically turns on when connected to a charger and delays for 5 seconds before automatically turning off when the charger is disconnected by the owner.
2
2
Share

Why does the car move backward when in drive gear?

Because the engine's power and the reverse motion resistance of the transmission shaft are absorbed by the torque converter. Here are the specific details of related content: 1. Possible causes: It may be caused by a faulty transmission gear position sensor, valve body failure, or shift mechanism malfunction. Essentially, rolling backward on a slope means the car doesn't have enough power to climb, causing it to roll back. Alternatively, if the car is heavily loaded, the resistance might exceed the engine's output power. 2. Solutions: Automatic transmissions usually have a delay of more than 1 second! After shifting into drive gear, do not release the brake immediately, and the car won't roll backward. When rolling occurs, the correct approach is to brake promptly. If equipped with a hill-start assist system, wait for the system to function properly before starting again.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.