What are the two-door coupes from Mercedes-Benz?

1 Answers
DeWalker
07/29/25 9:17pm
Mercedes-Benz's two-door coupes include the C-Class Coupe, E-Class Coupe, S-Class Coupe, AMG GT, SLC, SL, CLK, CL, and others. Taking the Mercedes-Benz C-Class Coupe as an example, this model is an imported version and is equipped with three types of engines: a low-power 1.5-liter turbocharged engine, a high-power 1.5-liter turbocharged engine, and a 2.0-liter turbocharged engine. The low-power 1.5-liter turbocharged engine delivers 156 horsepower and a maximum torque of 250 Nm, with a maximum power output at 5,700 rpm; the high-power 1.5-liter turbocharged engine produces 184 horsepower and a maximum torque of 280 Nm, with a maximum power output at 6,100 rpm; the 2.0-liter turbocharged engine offers 258 horsepower and a maximum torque of 370 Nm, with a maximum power output at 6,100 rpm.
Was this review help?
6
2
Share
More Forum Discussions

Where is the coolant located in the Mercedes-Benz SLK230?

Mercedes-Benz SLK230 coolant is located behind the left headlight in the engine compartment. Mercedes-Benz SLK230 coolant location: Mercedes-Benz SLK230 coolant is located behind the left headlight in the engine compartment. Method for adding antifreeze: Unscrew the radiator cap, open the radiator drain valve, and drain the antifreeze. Insert a rubber hose connected to a tap into the radiator filler port, turn on the tap, and allow tap water to continuously flow through the engine cooling system. During the flushing process, keep the engine idling and continue the operation until clean water flows out from the radiator. Turn off the tap, wait until all water in the cooling system is drained, then close the radiator drain valve. Add antifreeze from the radiator filler port until the radiator is full. Unscrew the reservoir cap, add antifreeze up to the "Max" mark, being careful not to exceed it. Replace and tighten the radiator cap and reservoir cap. Start the engine and let it idle for 2-3 minutes, then unscrew the radiator cap. At this point, the coolant level will drop as some air is expelled from the cooling system. Add more antifreeze until it reaches the "Max" mark again.
13
4
Share

Why should you honk the horn more often when driving in heavy fog?

When driving in heavy fog, honking the horn more often is to attract the attention of others and avoid potential dangers. Root cause: In foggy conditions, visibility is low, the driver's vision is blurred, the visual distance is shortened, and the field of view is narrowed. Honking the horn more often on the road alerts pedestrians and vehicles to avoid traffic accidents. Precautions for driving in fog: Drive slowly in foggy conditions. Never use high beams when driving in fog. Judge the situation promptly. Avoid unnecessary overtaking in fog. Maintain a greater following distance than usual when driving in fog. Use the horn frequently when driving in fog. Pay extra attention to pedestrians and motorized scooters.
12
2
Share

How many points are deducted for driving in the wrong direction on the opposite lane?

Driving in the wrong direction on the opposite lane results in a deduction of 3 points. Penalty details: According to the "Road Traffic Safety Law of the People's Republic of China," motor vehicles must drive on the right side. Drivers who drive in the wrong direction on ordinary roads will be fined and have 3 points deducted. What constitutes driving in the wrong direction: On roads with solid dividing lines, if a motor vehicle enters the opposite lane, it is considered driving in the wrong direction. Roads with double solid lines or single solid lines must not be crossed under any circumstances, otherwise, it is deemed as driving in the wrong direction. On roads with dashed dividing lines, overtaking is allowed if it can be done safely, but if an accident occurs, the vehicle that crossed the line will be considered as driving in the wrong direction. On roads with one-way signs, any motor vehicle not driving in the designated direction is considered as driving in the wrong direction. In China, vehicles must drive on the right side. If a vehicle drives on the left side of a divided road, it is considered as driving in the wrong direction.
8
2
Share

What Does the Haval H4 Chassis Analysis Include?

Haval H4 chassis analysis is divided into three parts. Part One: The Haval H4 adopts a MacPherson strut front suspension, with the front subframe designed as a full-frame structure. The front end is covered with a non-metallic engine guard plate, and the inner side of the guard plate is lined with a large area of soundproofing cotton. Both the fuel tank and carbon canister areas are covered with non-metallic guard plates. To achieve better airflow guidance, the guard plates are designed in a streamlined shape. The chassis pipelines are tightly attached to the inner steel plate of the chassis and fixed with non-metallic clips, with 50% of the area exposed. Part Two: The rear suspension uses a double-wishbone independent suspension, with some components made of high-cost aluminum alloy. The chassis is equipped with 4 longitudinal beams (2 side beams + 2 longitudinal beams), and several cross beams are designed in the middle of the chassis. To enhance the protection performance of key chassis components, the H4 has independently designed reinforcement rods forming a frame structure around the fuel tank and carbon canister. This design also helps reduce unsprung weight. Part Three: Reinforcement rods are designed around the fuel tank. Besides the fuel tank area, even the carbon canister of the H4 is well protected. The reinforcement rods provide excellent protection for the vehicle's chassis fuel lines, fuel tank, and overall chassis. The H4's chassis protection ensures you have minimal concerns when driving on rough off-road terrain.
13
4
Share

Can Modified Exhaust Tailpipes Pass Vehicle Inspection?

Common modification methods include enlarging the exhaust pipe diameter or installing an additional exhaust tail section. These modifications alter the vehicle's appearance and are highly noticeable, making them unable to pass the annual inspection. However, if a variable exhaust valve is installed, it is not only visually undetectable but also produces the same sound as a normal vehicle when not activated, thus allowing it to pass the inspection. However, there are exceptions: After modifying the exhaust pipe, if you flaunt it on urban roads, making loud noises that announce your presence before the car is even seen, drawing attention from the entire street, such behavior will certainly result in fines if caught by traffic police. Exceptions: As long as you do not activate the loud sound while driving normally in urban areas, behaving like any ordinary car, you won't be stopped by traffic police. Although the sound of a modified exhaust pipe may be thrilling, it can disturb others' normal driving. Additionally, the exhaust system is a crucial component of the vehicle; it's best not to modify it arbitrarily, as it may lead to excessive engine carbon buildup and premature failure.
13
5
Share

Does the Haval H4 have ISOFIX interfaces?

Haval H4 has ISOFIX interfaces. Introduction to Haval H4 ISOFIX interfaces: The seat interface of the Haval H4 is ISOFIX. The ultimate goal of establishing ISOFIX is to ensure that any ISOFIX child seat you purchase fits your car, and you can simply plug it into the ISOFIX interface. Installation method for Haval H4 ISOFIX interfaces: Take out the child safety seat and pull out the integrated ISOFIX interface from the base at the back. Retrieve the LATCH interface from the storage bag at the back of the seat; if there is no LATCH interface in the car, this step is unnecessary. Locate the ISOFIX interface marking in the car and insert the ISOFIX guide rail. Align the seat's ISOFIX with the guide rail, and after insertion, check whether the side indicator system changes from red to green. If it turns green, the installation is secure; if it remains red, reinstallation is required. Open the LATCH interface at the rear of the back seat, then open the seat's LATCH interface. Thread the seat's LATCH interface through the gap in the seat headrest and connect it to the car's LATCH buckle, tightening it while checking if the indicator system turns green. Pass the car's safety belt through the seat as shown and fasten it. Secure the safety belt connection strap at the red position indicated in the diagram and pull it a few times to ensure it does not loosen. Open the five-point safety belt and adjust the seat's headrest and shoulder straps to a position suitable for the baby.
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.