···
Log in / Register

What are the trunk dimensions of the XPeng P7?

6Answers
MacIsabela
07/29/2025, 12:06:50 PM

The trunk dimensions of the XPeng P7 are 500mm in length, 970mm in width, and 1100mm in depth. Below are the detailed specifications of the XPeng P7: 1. Vehicle Positioning: The P7 is a pure electric mid-size car with a wheelbase of 2998mm, and its length, width, and height are 4880mm, 1896mm, and 1450mm respectively. 2. Powertrain: The P7 is available in rear-wheel drive and all-wheel drive versions. The rear-wheel drive version features a single motor, while the all-wheel drive version comes with dual motors. The single motor version has a maximum power output of 196kW and a maximum torque of 390Nm. The dual motor version boasts a combined power output of 316kW and a combined torque of 655Nm. 3. Suspension Type: The P7 is equipped with a double-wishbone independent suspension at the front and a multi-link independent suspension at the rear.

Was this review help?
103
Share
VonSerenity
08/15/2025, 12:25:03 AM

I remember the trunk dimensions of the XPeng P7 very clearly, with a volume of approximately 440 liters. The specific measurements are around 1.8 meters in length, 1 meter in width, and 0.5 meters in height. I find the space quite sufficient for my daily commute and weekend trips—it can easily accommodate two large suitcases with room to spare. The depth is just right for fitting golf bags or camping gear. Compared to my friend’s Model 3, the XPeng P7’s trunk opening is larger, making it easier to load and unload items, especially bulky ones like bicycles. In practical use, I’ve also noticed that the rear seats can be folded down to expand the space, increasing the total capacity to nearly 900 liters, which is incredibly useful for family road trips. For maintenance, I regularly clean the interior to keep it tidy and avoid wear on the lining. Overall, this size is considered above average among similar electric vehicles, offering strong practicality.

Was this review help?
7
Share
Expand All
OErin
10/12/2025, 01:48:46 AM

The trunk of the XPeng P7 is indeed quite spacious, with an official volume of 440 liters. The length measures approximately 1.8 meters, the maximum width reaches 1 meter, and the depth is around 0.5 meters. Before purchasing, I compared it with other models like the BYD Han, which has a slightly smaller trunk. This space can easily accommodate three or four suitcases or a baby stroller, making it perfect for weekend family outings with picnic baskets and tents. In daily use, I find the low opening design makes loading and unloading heavy items effortless without compromising rear seat comfort. The expandability is also good, as the rear seats can be folded down to increase cargo capacity. For budget-conscious buyers, this size offers high cost-effectiveness, being both practical and not adding much extra cost. I recommend testing the trunk with your own luggage during the car selection process to ensure it meets your personal needs.

Was this review help?
11
Share
Expand All
LePenelope
11/25/2025, 01:50:07 AM

The trunk has a capacity of 440 liters, with dimensions approximately 1.8 meters long, 1 meter wide, and 0.5 meters deep. I frequently use this space for my daily commute, and it can easily accommodate two large suitcases, with enough depth to fit folding chairs. The rear seats can be folded down for more flexibility, making it suitable for larger items. It offers high practicality and is easy to clean and maintain, avoiding clutter that could affect long-term use.

Was this review help?
15
Share
Expand All
LaylaFitz
01/15/2026, 03:22:13 AM

I remember the trunk capacity of the XPeng P7 is 440 liters, with dimensions approximately 1.8x1x0.5 meters. This car is very practical for taking my child out, easily accommodating a stroller and multiple backpacks. The deep design prevents boxes from sliding out. With the rear seats folded down, the space becomes even larger, making grocery shopping trips a breeze. Compared to other electric models, the size is quite reasonable, posing no pressure for family use. For maintenance, I recommend regularly wiping the interior walls to keep it clean and reduce the occurrence of odd noises.

Was this review help?
7
Share
Expand All
StKeegan
04/11/2026, 11:04:54 PM

The trunk capacity of the XPeng P7 is 440 liters, with specific dimensions of approximately 1.8 meters in length, 1 meter in width, and 0.5 meters in depth. I find it very convenient for commuting and short trips. The space is sufficient to accommodate a medium-sized refrigerator or fitness equipment, and the opening design makes it easy to load and unload heavy items. In practical comparison, it is even more practical than some fuel-powered cars, with low cost but improved life efficiency; the cargo capacity doubles when the rear seats are folded down. To maintain it well, I avoid overloading and keep the interior tidy to ensure long-term use without damage.

Was this review help?
11
Share
Expand All
More Q&A

How Often Should Motorcycle Oil Be Changed?

New motorcycles require an oil change every 1,000 kilometers initially, followed by every 3,000 kilometers thereafter. Below is an introduction to the functions of engine oil: The Lubrication Function of Engine Oil: There is rapid relative sliding between the piston and cylinder, as well as between the main shaft and bearing bush. To prevent excessive wear on components, an oil film must be established between the two sliding surfaces. A sufficiently thick oil film separates the surfaces of the relatively sliding parts, thereby reducing wear. The Auxiliary Cooling Function of Engine Oil: Due to its relatively low specific heat value and its location inside the engine, engine oil does not inherently have a cooling effect. However, as fuel combustion generates heat within the engine during operation, the engine oil carries this heat back to the oil tank, where it is then dissipated into the air, assisting the radiator in cooling the engine. The actual cooling effect is provided by the water outside the engine casing.
116
Share

What are the differences between hybrid and range-extended electric vehicles?

The difference between hybrid and range-extended electric vehicles is that the engine in a range-extended vehicle only supplies power and does not drive the wheels. Hybrid vehicles have a transmission and are driven by the engine. Range-extended electric vehicle system: The system is equipped with an internal combustion range extender on the vehicle, which is solely responsible for generating electricity for the vehicle. The generated electricity not only directly powers the drive motor but also charges the battery. When the battery is sufficiently charged, the internal combustion engine can stop working, and the battery directly powers the motor to propel the vehicle forward. Hybrid electric vehicle system: It consists of two power systems: motor drive and engine drive. A plug-in hybrid is a hybrid vehicle that can be charged externally, serving as a "fuel-efficient version" of a gasoline-powered car to some extent, capable of both charging and refueling.
120
Share

How is the route selection for Subject Three conducted?

Subject Three route selection varies depending on the situation, as driving school systems differ across regions. The specific method of selection is determined locally. Different scenarios for route selection: Some driving schools conduct the selection on the exam day. After candidates arrive at the test center, submit their exam files, and enter the waiting room, the exam route is randomly selected by a computer. The result will be displayed on the screen along with the candidate's exam information. Additionally, for some driving schools, the Subject Three exam route is selected by the instructor on the exam day, and candidates only learn the route after boarding the vehicle. The exact method depends on the local practice, and candidates can inquire with their instructors or driving schools. Important notes: If fingerprint verification fails, candidates must exit the vehicle to re-collect their fingerprints before rejoining the queue for the exam. During the exam, if a candidate's score falls below the passing threshold, the system will automatically prompt the candidate to pull over. After completing the pull-over maneuver, the system will indicate the start of the next exam attempt.
105
Share

How to Tell What Year a Car Is?

Here are the methods to determine the year of a car: 1. Check the manual: If you want to know the model year of the car, the most direct method is to look at the manual provided at the time of purchase, as it will include this information. 2. Look at the vehicle's nameplate: You can also check the car's nameplate, which is usually located below the passenger-side door and can be seen when the door is opened. 3. Call customer service: There is always a dedicated customer service representative you can contact for inquiries. If you have any questions about the car, you can directly ask the customer service. 4. Check the car's VIN code: Generally, the 10th digit of the car's VIN code indicates the year. However, this year may differ slightly from the manufacturing year, usually by no more than a year, and is close to the model year, which is generally the default assumption.
104
Share

What to Do When the Vehicle Battery is Low on Power?

When the vehicle battery is low on power, charge it promptly. Reasons for low battery power: Car battery failure, leaving lights or radio on for an extended period while the engine is off. When parking for a long time, it is also advisable to turn off the power of unnecessary electrical devices (such as interior and exterior lights, audio systems, navigation, etc.). Solutions for a dead battery: Use the push-start method to assist in ignition. The principle of "push-starting" the car is to manually push the vehicle, converting this kinetic energy to the cylinder pistons, forcing the compression of gases inside the cylinder and igniting them. After successful ignition, do not turn off the engine immediately; maintain idle speed for a while to charge the battery.
118
Share

What is the full name of the D gear?

D gear stands for drive gear, indicating that the engine is running and the vehicle can move forward. Introduction to D gear: D gear is one of the most common gears in automatic transmission vehicles, belonging to the forward gear category, covering all forward gears within the vehicle's automatic transmission. When the gear shift lever is placed in D gear, the hydraulic control system automatically engages the corresponding forward gear circuit based on throttle opening signals and vehicle speed signals. Main functions of D gear: Its primary function is to enable real-time automatic selection of appropriate gears through the transmission's computer and accompanying mechanical structure while the vehicle is moving forward, thereby eliminating the need for manual gear shifting and greatly freeing the driver's hands and feet. This enhances driving convenience, ease, and comfort. The driver only needs to control the accelerator pedal, brake pedal, and steering wheel, allowing better focus on the driving view and road conditions.
115
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.