What are the trunk dimensions of the Peugeot 408?

What is the Clutch Driven Disc Mounted On?

Clutch driven disc is mounted between the engine flywheel and the transmission. Here is an introduction about the clutch: 1. Introduction: The clutch is located inside the flywheel housing between the engine and the transmission. The clutch assembly is fixed to the rear plane of the flywheel with screws, and the output shaft of the clutch is the input shaft of the transmission. 2. Function: During driving, the driver can press or release the clutch pedal as needed to temporarily separate or gradually engage the engine and the transmission, thereby cutting off or transmitting the power from the engine to the transmission. 3. Characteristics: The clutch is a common component in mechanical transmission, which can separate or engage the transmission system at any time. Its basic requirements include smooth engagement, quick and thorough separation; easy adjustment and repair; small external dimensions; light weight; good wear resistance and sufficient heat dissipation capacity; easy and labor-saving operation. Commonly, it is divided into two types: jaw clutch and friction clutch.

15

2

Share

Why does the car fail to start after being parked for a long time?

If the car fails to start after being parked for a long time, it could be due to the battery being drained from prolonged inactivity. Here are some precautions to take when leaving a car unused for an extended period: 1. Disconnect the battery to prevent power loss: After long-term parking, a previously normal vehicle may struggle to start. The battery charges automatically during regular driving, but it still discharges when the vehicle is idle. However, the discharge rate varies depending on the battery's model, usage time, and type, so it's essential to check your specific battery condition. 2. Minimize fuel in the tank: Gasoline quality has two key indicators - actual gum content and induction period, which represent fuel stability. Gasoline that's stored too long will oxidize severely, forming gum. This gum can cause valves to stick and not close properly. At high temperatures, it decomposes into carbon deposits that accumulate on cylinder walls, piston tops, and cylinder heads, leading to poor engine performance, increased knocking, and accelerated wear.

15

4

Share

Where is the reversing light switch of Volkswagen Lavida located?

The reversing light switch of Lavida is located on the vehicle's transmission. When the car is shifted into reverse gear, the reversing lights at the rear of the vehicle will turn on. The reversing lights, installed at the rear of the car, are used to illuminate the road behind during reversing and serve to alert vehicles and pedestrians behind. Below is some relevant information about the Lavida: 1. The Lavida is produced by Shanghai Volkswagen and was launched in June 2008. While continuing the design language of 'dynamic and fashionable' in the A-segment car market, the LAVIDA Lavida embodies a new design DNA—'fusion'. As a new car tailor-made for Chinese consumers, the LAVIDA Lavida not only maintains the excellent quality of German design but also incorporates many aesthetic concepts reflecting traditional Chinese culture and cutting-edge design elements. 2. The Lavida injects more luxury and grandeur into the A-segment car market with its forward-looking design, rewriting consumers' traditional impressions of the A-segment car market, thereby meeting more localized consumer needs.

5

2

Share

What to Do When 95 Gasoline is Accidentally Filled with 92 Gasoline?

When 95 gasoline is accidentally filled with 92 gasoline, immediate action should be taken to drain the 92 gasoline. Below is a detailed explanation of the consequences of filling 95 gasoline with 92 gasoline: 1. When 95 gasoline is filled with 92 gasoline: The car engine may experience knocking, abnormal pressure in the combustion chamber, leading to severe carbon deposits, poor engine cooling, and in extreme cases, engine damage. 2. When 95 gasoline is filled with 92 gasoline: The engine may knock during high-speed operation. Lower-grade gasoline has poor anti-knock properties, and high-end cars, which require higher engine performance, may experience knocking when using lower-grade gasoline during high-speed operation. 95 gasoline has a higher octane rating, and the higher the octane content in gasoline, the better the anti-knock performance for the engine.

1

2

Share

What are the steps to adjust the Ford Focus seats?

There are 6 steps to adjust the Ford Focus seats: 1. Enter the vehicle: First, the driver and passengers should get into the car; 2. Seat height adjustment: After sitting in the driver's seat, the first step is to adjust the seat height to ensure there is some space between the head and the roof, avoiding injury to the driver when the vehicle is driving on bumpy roads; 3. Seat forward and backward adjustment: Pull the metal rod under the seat to move the seat forward or backward. Once adjusted to the proper position, release and move the seat slightly to ensure it is securely fixed in place; 4. Seat backrest adjustment: Place both hands on the steering wheel, and the position is correct when the wrists just rest on the top edge of the steering wheel; 5. Seat headrest adjustment: Try to keep the distance between the head and the headrest within two fingers to protect the neck; 6. Rear seat folding: The owner can press down on the unlock button on the back of the rear seat and then lean forward to fold it.

12

2

Share

How many kPa is one atmospheric pressure equal to?

One atmospheric pressure is equal to 101.325 kPa. Below is an introduction to how many kPa one atmospheric pressure is equal to in tires: 1. Standard tire pressure: 240-250 kPa, converted to pressure is 2.4-2.5 atmospheric pressure. 2. Reinforced tire pressure: 280-290 kPa, converted to pressure is 2.8-2.9 atmospheric pressure. 3. Maximum tire pressure: 350 kPa, converted to pressure is 3.5 atmospheric pressure. Below is additional information on tire pressure: 1. If the tire pressure is too high, the contact area between the tire and the road surface will decrease, leading to increased wear in the center of the tire. Additionally, the adhesion will decrease, affecting driving safety. High tire pressure also reduces the shock absorption effect of the tire, impacting the comfort of the vehicle. In hot summer conditions, excessively high tire pressure increases the risk of a blowout. 2. If the tire pressure is too low, the contact area between the tire and the road surface will increase, causing severe wear on both sides of the tire, heavier steering, increased rolling resistance of the vehicle, and higher fuel consumption. The repeated squeezing and deformation of the tire generate a large amount of heat, which can lead to a blowout.

10

2

Share

What are the trunk dimensions of the Peugeot 408?

What is the Clutch Driven Disc Mounted On?

Why does the car fail to start after being parked for a long time?

Where is the reversing light switch of Volkswagen Lavida located?

What to Do When 95 Gasoline is Accidentally Filled with 92 Gasoline?

What are the steps to adjust the Ford Focus seats?

How many kPa is one atmospheric pressure equal to?

How many days should the car be parked in the underground garage after tinting?

Is it necessary to install car sill protectors?

What are the contents of driver review?

What is the reason for the simultaneous illumination of the ABS and airbag lights in the Ford Escort?