What are the trunk dimensions of the older Odyssey model?

2 Answers
Tiffany
07/23/25 8:32pm
Odyssey trunk depth is 560 mm, width is 1200 mm, height is 1250 mm. The following are specific details: 1. With the third-row seats folded down: depth is 870 mm, width is 980 mm, height is 1070 mm, and the second-row seats can also be folded down. 2. Without folding the seats: by sacrificing the rear seat back angle, it can accommodate a 28-inch and a 20-inch suitcase. 3. Others: The third-row seats can be stowed into the floor, thus providing ample trunk space. Such storage space is sufficient for carrying cargo. The third-row seats can also be pushed forward to achieve higher storage space.
Was this review help?
15
4
Share
EstherLynn
08/10/25 6:31pm
As an owner of an older Odyssey model that I've driven for nearly a decade, I find the trunk dimensions highly practical. With the third-row seats in normal use, the depth is about 50 cm, width approximately 1 meter, and height 80 cm, offering roughly 250 liters of capacity – enough for three to four medium-sized suitcases without issues. When traveling with family, it easily accommodates luggage, children's toys and such. If you fold down the third row, the depth extends to over 1 meter, significantly increasing space to fit a bicycle or bulk grocery shopping. I think these dimensions strike a good balance – compact enough for city driving yet sufficient for long trips. For families with children, it saves considerable packing hassle.
Was this review help?
13
0
Share
Expand All
More Forum Discussions

Why are hearses often based on Iveco vehicles?

Because Iveco vehicles are well-suited for hearse applications in terms of power, cargo space, and load capacity. Below is relevant information about Iveco vehicles: 1. Overview: Iveco is the abbreviated name of Nanjing Iveco Automobile Co., Ltd., a joint venture established between China's Nanjing Automobile Group and Italy's Fiat Group Iveco Company. It represents not only the largest cooperative project between the Chinese and Italian governments but also the most successful overseas collaboration in Fiat Group's century-long history. 2. Other developments: On April 12, 2021, Iveco announced the signing of a memorandum of understanding with autonomous truck technology company Plus. The two parties will jointly develop autonomous heavy trucks and promote the global commercialization of these products.
7
4
Share

What is the reason for the central locking system failure in BAIC Huansu S3?

BAIC Huansu S3 central locking system failure may be due to a damaged central control switch or a faulty central control relay fuse. Below are the relevant details about the S3: 1. Exterior: The Huansu S3 features a more powerful "X"-shaped front grille design, paired with inverted "L"-shaped LED daytime running lights, creating a bold and dynamic appearance with high recognition. The front lens headlights, complemented by smoked black accents, are sharp and stylish, showcasing high-end configurations and trendy elements. 2. Interior: The Huansu S3 adopts a mainstream black sporty interior design. The seats feature a dual-tone black and rose-red color scheme with double red stitching, highlighting a youthful and dynamic design style. The functional areas on the dashboard are intuitively laid out, allowing easy access to the multimedia audio system, air conditioning knobs, air vents, and more, ensuring convenient operation.
3
1
Share

What causes the engine warning light to illuminate in a Mercedes GLB?

Sensor malfunctions, vehicle maintenance issues, fuel quality problems, poor combustion of the air-fuel mixture, engine intake issues, turbocharger problems, exhaust system faults, and anti-theft system malfunctions are the primary reasons for the engine warning light to illuminate. Additionally, during vehicle startup, the car performs a self-diagnostic check on the engine system. Normally, the warning light should turn off after the self-check is completed. If it remains illuminated for an extended period, it is advisable to visit a repair shop promptly for professional assistance to diagnose and eliminate potential safety hazards. Below is a detailed explanation of each potential fault: Sensor Issues: Sensors such as coolant temperature, crankshaft position, air flow, intake temperature, and oxygen sensors may become damaged, have poor connections, or experience signal interruptions. When the ECU cannot accurately obtain engine data due to these issues, the engine warning light will illuminate. In such cases, it is essential to seek professional inspection at a service center to address the problem promptly. Maintenance Issues: Poor engine maintenance is one of the most common causes of the engine warning light turning on. Vehicles have specific maintenance schedules, and failure to adhere to them, combined with poor driving habits, can increase the engine's operational burden, eventually triggering the warning light. Fuel Quality Issues: This refers to both fuel and engine oil. Vehicles require specific fuel grades, and engine oils can be semi-synthetic or fully synthetic. Manufacturers typically recommend the appropriate fuel grade and oil type for the vehicle. Using incorrect fuel or oil over time can lead to engine wear, causing the warning light to illuminate. Always use the recommended fuel grade and engine oil. Poor Combustion of Air-Fuel Mixture: Faulty spark plugs, ignition coils, fuel pumps, or clogged fuel lines can lead to poor combustion of the air-fuel mixture. This can result in engine carbon buildup or knocking, which the oxygen sensor detects and reports to the ECU, triggering the warning light. Intake Issues: Proper air intake is crucial for engine combustion. A dirty or clogged air filter can restrict airflow, leading to potential blockages and, in severe cases, causing the engine warning light to illuminate. Turbocharger Problems: Issues with the intake boost system or turbocharger can also trigger the engine warning light. Common problems include turbocharger damage, accompanied by symptoms such as oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. Exhaust System Issues: Faults in the rear oxygen sensor, catalytic converter, exhaust camshaft, or bearings can cause the warning light to illuminate. The catalytic converter is particularly prone to damage due to factors such as using leaded fuel, improper lubricant additives, physical impacts, or fuel system malfunctions. Anti-Theft System: If the vehicle's electronic anti-theft system malfunctions or the anti-theft controller is incompatible with the engine control unit, the engine may fail to operate correctly, and the warning light may turn on. Solutions for an Illuminated Engine Warning Light: If the engine warning light is on and the car cannot start, this may indicate a fuel pump or ignition component failure. It is recommended to call for roadside assistance immediately. If the warning light is on but the vehicle is drivable, yet exhibits severe shaking or loss of power, pull over safely and request professional help. If the warning light is on but no noticeable driving issues occur, it may indicate a faulty sensor. In such cases, you may continue driving cautiously at low speeds but should visit a repair shop as soon as possible to address the issue.
15
5
Share

What does the manual transmission brake pedal mean?

The manual transmission brake pedal is a pedal that limits power, also known as the foot brake. Below is an introduction to methods for checking the wear level of brake pads: 1. Check the thickness of the friction material: Brake pads consist of two parts—a metal base plate and a friction material layer. When braking, the friction material contacts the brake disc to generate friction, achieving the braking effect. The typical thickness of the friction material is 10 mm. When it wears down to 5 mm, it indicates severe wear, and the brake pads need replacement. 2. Listen for unusual noises during braking: Some brake pads have a hidden metal pin within the friction material. When the friction material wears down to a certain level, the metal pin contacts the brake disc, producing a sharp, unusual noise during braking to alert the driver to replace the brake pads. 3. Inspect the thickness of the brake pads: Removing the tire allows for a clear view of the brake pads' condition. Brake pads gradually wear with use and must be replaced when they reach the wear limit.
20
2
Share

Which Accord model is the 2.4ivtec?

Eighth-generation Accord. More details about the eighth-generation Accord are as follows: 1. Exterior: The body length reaches 4945mm, width 1845mm, and height 1480mm (with the four-cylinder version +17mm and the six-cylinder version +14mm). The wheelbase is 2800mm, while the floor height of the new Accord is lowered by 15mm, significantly reducing the center of gravity and enhancing the original sporty style. The eighth-generation Accord offers the best and largest interior space in Accord's history. 2. Interior: With design techniques and extensive use of high-strength steel (up to 48%), the eighth-generation Accord becomes the model with the highest body strength in Accord's history, improving vehicle safety, handling performance, cabin quietness, and overall durability. Compared to the seventh-generation Accord, torsional stiffness increased by 20%; rear vertical stiffness by 33%; and front suspension support point stiffness by 36%. To reduce aerodynamic drag and lift, the lower part of the body adopts a design as flat as possible, decreasing air resistance (-8%) and lift (-23%) during driving, ensuring better fuel efficiency and more stable high-speed performance.
3
0
Share

Where is the Mondeo toolkit located?

The Mondeo toolkit is located beneath the spare tire. Below is an introduction to the Mondeo: 1. Overview: In 2017, Changan Ford launched the 2017 Ford New Mondeo. The 2017 Ford New Mondeo features an advanced powertrain system and is equipped with FordPass Connect, SYNC®3 infotainment system, and intelligent driver-assistance technologies, representing the future development direction of smart connected vehicles. 2. Features: The 2020 Ford Mondeo not only retains its consistent advantages in power and handling performance but also undergoes a series of upgrades to meet the needs of family consumers, catering to more happy families' demands for high-quality travel experiences. 3. Configuration: Compared to the current model, the 2020 Ford Mondeo upgrades the original 8-inch central control screen to a 12.8-inch display and adds the SYNC+ intelligent infotainment system, achieving a natural speech recognition rate of up to 98%.
10
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.