What are the trunk dimensions of the Haval H6?

1 Answers
KimberlyRose
07/30/25 4:30am
The trunk dimensions of the Haval H6 are 1010mm in depth, 910mm in height, and 1040mm in width. Taking the 2021 Haval H6 as an example, it belongs to the compact SUV category, with body dimensions of 4615mm in length, 1860mm in width, and 1720mm in height, a wheelbase of 2680mm, and a fuel tank capacity of 58 liters. The 2021 Haval H6 features a MacPherson independent front suspension and a double-wishbone independent rear suspension. It is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 150PS, a maximum power of 110kW, and a maximum torque of 210Nm, paired with a 6-speed manual transmission.
Was this review help?
7
4
Share
More Forum Discussions

What Causes Paint Peeling?

There are many reasons for paint peeling, which ultimately come down to poor maintenance. For new cars, the paint surface generally has no issues and does not naturally peel unless there is a scrape or collision that is not repaired promptly. However, it also depends on the area. For example, if there is a minor scratch on the bumper and it doesn't affect the appearance, it may indeed be left untreated, as most bumpers are made of non-metallic materials and do not pose a rust risk. More relevant information is as follows: Color Difference: There are nuances in paint repair. Many people notice that the repainted areas on their cars have a slight color difference compared to the original factory paint. This is hard to avoid because the refinishing process at later stages rarely matches the level of the original manufacturer. Durability: If the paint is applied at a repair shop with relatively simple equipment, the durability of the paint surface may be poorer, and natural peeling may occur more easily.
16
0
Share

What is the allowable error for electronic truck scales?

Electronic truck scales have measurement errors that are separately inspected at multiple weighing points. For example, a truck scale with a maximum capacity of 100t, a verification scale interval number of 3000, a verification scale interval of 20kg, and a minimum weighing capacity of 20kg must not exceed the allowable error values at 10 tons, 50 tons, 80 tons, and 3000 grams. The scale is considered qualified only when all these points pass inspection. Additional relevant information is as follows: Inspection Items: When inspecting truck scales at a nationally authorized metrological verification institution, there are many inspection items, such as the visual inspection of the truck scale, electromagnetic interference resistance testing, metrological mark verification, and auxiliary function checks. Metrological Standards: Truck scales belong to weighing instruments of accuracy class. Marked as Class III, also known as Class 3 scales.
12
4
Share

What is an engine composed of?

An engine is composed of the following components: 1. Crank-connecting rod mechanism: consisting of the main body group, piston-connecting rod group, and crankshaft-flywheel group; 2. Valve train: composed of the valve group and valve transmission group; 3. Cooling system: including the water pump, radiator, fan, thermostat, and coolant; 4. Lubrication system: consisting of the oil pump, oil strainer, oil filter, oil cooler, and lubricating oil; 5. Ignition system: made up of the battery, generator, ignition coil, spark plug, and ignition switch; 6. Starting system: comprising the battery, starter, and ignition switch; 7. Fuel supply system: including the fuel tank, fuel pump, air filter, intake manifold, high-pressure fuel pump, fuel injector, sensors, and electronic control unit.
17
4
Share

Is the Golf produced by Shanghai Volkswagen or FAW-Volkswagen?

The Golf is produced by FAW-Volkswagen and is a compact two-door family car. Taking the Golf 2021 200TSI DSG as an example, its body dimensions are: length 4296 mm, width 1788 mm, height 1471 mm, with a wheelbase of 2636 mm, a fuel tank capacity of 51 liters, and a trunk capacity of 380 liters. The Golf 2021 200TSI DSG is equipped with a 1.2L 4-cylinder turbocharged engine, delivering a maximum horsepower of 116 hp, a maximum power of 85 kW, with the maximum power achieved at 5000 rpm, a maximum torque of 200 Nm, and the maximum torque available between 2000 to 3500 rpm. It is paired with a 7-speed dual-clutch transmission.
2
1
Share

What are the potential damages caused by car atomization disinfection?

Complex operation, excessively long disinfection time, severe interior pollution leading to suboptimal effectiveness, and potential adverse effects of steam on the vehicle's electronic systems are some concerns. Below is relevant information: Chemical disinfection: This method primarily involves spraying and wiping car components with disinfectants to eliminate pathogens through chemical reactions. This sterilization approach is simple to operate and achieves thorough pathogen elimination. Common chemical disinfectants on the market include peracetic acid and 84 disinfectant. While this method provides thorough disinfection, it leaves behind odors in the cabin post-treatment, requiring ventilation for a period. Ozone disinfection: Ozone disinfection machines utilize specialized automotive equipment that rapidly generates large quantities of ozone for disinfection purposes. Ozone serves as a highly efficient broad-spectrum rapid sterilizer capable of eliminating various pathogens and microorganisms. When reaching specified concentrations, disinfection and sterilization can be completed swiftly.
17
1
Share

What is the difference between a light motorcycle and a heavy motorcycle?

Different names: Heavy motorcycles, also known as motorcycles, originate from the term used in Taiwan; another interpretation refers to motorcycles with larger displacements. Power differences: Generally, motorcycles with a displacement of over 50cc or horsepower exceeding 40, and a maximum speed over 45 kilometers per hour, can be called heavy motorcycles. Weight differences: Heavy motorcycles are generally heavier, such as the Harley-Davidson V-Rod model, which weighs up to 660 pounds. In contrast, regular motorcycles are lighter. More related information is as follows: Heavy motorcycles: Heavy motorcycles are the abbreviated term for heavy-duty motorcycles. "Motorcycle" is a term used in Taiwan, referring to two-wheeled or three-wheeled motor vehicles powered by an engine. Definition: The term "heavy motorcycle" has two definitions. The first definition is "heavy motorcycle" as classified in Taiwan's relevant regulations. The second meaning refers to the commonly understood heavy-duty motorcycles.
4
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.