What are the traffic signal passage requirements?

2 Answers
StJaxon
07/29/25 1:12pm
Traffic signal passage requirements are as follows: 1. Green light signal: It is a permission signal. When the green light is on, vehicles and pedestrians are allowed to pass, but turning vehicles must not hinder the passage of straight-going vehicles and pedestrians. 2. Directional indicator signal: Directional signals are special indicator signals that direct the movement of motor vehicles. Different arrow directions indicate whether a vehicle should go straight, turn left, or turn right. 3. Pedestrian crossing signal: Pedestrian crossing signals include a green light and a red light, with meanings similar to those of intersection signals. When the green light is on, pedestrians are allowed to cross; when the red light is on, pedestrians are prohibited from entering the crossing, but those already in the crossing may continue or wait at the centerline. 4. Flashing warning signal: A continuously flashing yellow light alerts vehicles and pedestrians to proceed with caution after confirming safety. This signal does not control right-of-way and may be suspended above intersections or used at night when regular signals are off to remind drivers and pedestrians to proceed carefully. At intersections with flashing warning signals, vehicles and pedestrians must follow safety principles and traffic rules for uncontrolled intersections. 5. Lane signal: Lane signals consist of a green arrow and a red cross, installed on variable lanes and applicable only to that lane. A green arrow permits passage in the indicated direction, while a red cross or arrow prohibits it. 6. Yellow light signal: The yellow light's meaning is between green and red, both prohibiting and allowing passage. When the yellow light is on, it warns drivers and pedestrians that the passage time is ending and a red light is imminent. Vehicles should stop behind the stop line, and pedestrians should not enter the crossing. However, vehicles too close to stop may proceed, and pedestrians already in the crossing should assess oncoming traffic to proceed quickly, stay put, or retreat. 7. Traffic baton signal: When a traffic officer signals stop with a baton, vehicles must not proceed. Vehicles that have already passed the stop line may continue. A straight signal allows vehicles to go straight, and right-turning vehicles may proceed if they do not hinder others. A left-turn signal permits left-turning and straight-going vehicles, while right-turning vehicles and straight-going vehicles at T-intersections without crossings may proceed if they do not hinder others. 8. Red light signal: The red light is a mandatory stop signal. When this signal is on, prohibited vehicles must stop behind the stop line, and prohibited pedestrians must wait at the sidewalk. Vehicles waiting must not turn off engines, open doors, or have drivers leave. Bicycles must not detour left turns outside the intersection or use right turns to bypass straight paths. 9. Hand gesture signal: Hand signals include straight, left turn, and stop. When traffic signals, signs, or markings conflict with an officer's hand signals, the officer's commands take precedence.
Was this review help?
3
4
Share
Hylla
08/14/25 3:03am
The rules for traffic signal compliance are actually quite simple, but they must not be taken lightly. After driving for so many years, it has become second nature to me. When the red light comes on, you must come to a complete stop behind the stop line—even if there are no pedestrians or vehicles around, running it is not an option. Otherwise, traffic cameras will catch you, resulting in penalty points and fines, not to mention the safety risks. A green light isn't a death warrant; wait until it turns green before moving off, but first check left and right for any reckless pedestrians or vehicles. Only proceed once you've confirmed it's safe. The yellow light is the real test—it's a warning signal, not an invitation to speed up and dash through. Slowing down and coming to a complete stop is the safest approach. Remember, when turning at intersections, always follow dedicated arrow signals. If there are no arrows, obey the regular traffic lights, ensuring your vehicle doesn't cross the line or stop on the pedestrian crossing. A dashcam recording of these maneuvers can help clarify things in case of an accident. Safe driving is the bare minimum.
Was this review help?
17
5
Share
Expand All
More Forum Discussions

What Causes the Metallic Clanging Sound When Front Wheels Go Over Potholes?

The causes of metallic clanging sound when front wheels go over potholes are: 1. Damaged shock absorber top mount; 2. Broken suspension spring; 3. Faulty brake caliper pin; 4. Loose brake disc shield; 5. Loose brake pad retaining clip; 6. Stabilizer bar malfunction; 7. Faulty wheel bearing; 8. Loose chassis bolts. Solutions for metallic clanging sound when front wheels go over potholes: 1. Replace shock absorbers or suspension springs; 2. Repair brake system faults; 3. Replace wheel bearings; 4. Perform regular vehicle maintenance. Vehicle maintenance refers to preventive work involving inspection, cleaning, replenishment, lubrication, adjustment or replacement of certain components, also known as automotive servicing.
14
0
Share

What is the difference between internal circulation and external circulation in a car?

The difference between internal circulation and external circulation in a car is: 1. The indicator for internal circulation is an arrow pointing inward; the symbol for external circulation is from outside to inside. 2. Different functions: Internal circulation effectively prevents external dust and harmful gases from entering the car, improving the cooling and heating efficiency of the air conditioning; external circulation draws fresh air from outside into the car, maintaining air quality inside the vehicle. The methods for using car air circulation are: 1. Use internal circulation during traffic jams and external circulation during high-speed driving; 2. The use of internal and external circulation should be combined with air conditioning and heating; 3. Use external circulation during long-distance driving to allow fresh air from outside to enter the car, avoiding excessively low oxygen levels inside the vehicle.
3
5
Share

What is the longest Chery car?

Chery's longest model is the Exeed VX, measuring 4840mm in length, 1925mm in width, and 1745mm in height, equipped with 1.6T and 2.0T engines. Introduction to vehicle dimensions: The length, width, and height data represent the external dimensions of the vehicle body. The width measurement excludes the side mirrors, while the height measurement includes roof racks but excludes antennas. Vehicle classification is generally determined by body length and wheelbase. Actual vehicle space: Even if two vehicles share identical exterior dimensions, their interior space may differ. When selecting a car, don't rely solely on specifications—experience the cabin space firsthand.
1
5
Share

What are the three modes of the Haval M6?

The three modes of the Haval M6 are: Sport mode, Eco mode, and Comfort mode. The Haval M6 is a compact SUV. Taking the 2021 Haval M6 as an example, its body dimensions are: length 4664mm, width 1830mm, height 1729mm, with a wheelbase of 2680mm and a fuel tank capacity of 55 liters. The 2021 Haval M6 is equipped with a 1.5T turbocharged engine, with a maximum power of 110kW, reaching maximum power at 5600 to 6000 rpm, and a maximum torque of 210Nm, achieving maximum torque between 1800 to 4400 rpm.
4
0
Share

How to adjust the time on Honda CRV's clock?

Honda CRV's clock adjustment method is: 1. Click the car menu toggle button to bring up the time adjustment function; 2. Use the RES and SET buttons on the multifunction steering wheel to adjust the time display; 3. Press the ENTER button on the left side of the multifunction steering wheel to confirm the time setting; 4. Observe the instrument panel to check if the time display is normal. The Honda CRV is a classic urban SUV model produced by Dongfeng Honda Automobile Company, with dimensions of 4550mm in length, 1820mm in width, and 1685mm in height, and a wheelbase of 2620mm. The vehicle features a stylish and dynamic exterior design with smooth lines, rounded yet sporty, and the interior adopts Honda's family style with a two-tone color scheme that is warm and clean, equipped with practical configurations.
11
5
Share

How to Match the Remote for Mazda6 Key?

Mazda6 key remote matching method is: 1. Insert the key into the ignition switch, complete the operation of turning the ignition switch on and off three times within 5 seconds; 2. Close and open the door three times, and on the third time opening the door, the door lock switch will activate once; 3. Press the lock button on the remote twice, and the door lock switch will activate once again; 4. Remove the key, the door lock switch will activate twice, the alarm horn will sound twice, indicating the remote matching is successful. The Mazda6 is a mid-size car with a body length, width, and height of: 4670 mm, 1780 mm, 1435 mm, respectively, a wheelbase of 2675 mm, and a fuel tank capacity of 64 liters.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.