What are the traffic restrictions for non-local license plates in Shanghai urban area?

1 Answers
Victor
07/25/25 4:40pm
Shanghai urban area imposes traffic restrictions on non-local license plates from 7:00 to 20:00, Monday to Friday, except for Saturdays, Sundays, and national public holidays. Below is relevant information about the traffic restrictions for non-local license plates: 1. Restricted hours: On October 24, 2020, the Shanghai Public Security Bureau issued a notice announcing the extension of elevated road restrictions for non-local license plates from the original 8 hours to 13 hours. Additionally, starting from the first working day after the May Day holiday in 2021, ground roads within the inner ring will also be subject to restrictions, for which the Public Security Bureau will issue a separate notice. 2. Restricted roads: All roads within the enclosed area formed by Donghu Elevated Road—Tongcheng Elevated Road—Tonghui Road—Provincial Highway 03—Ring Expressway (South Line)—Ring Expressway (West Line)—Ring Expressway (North Line) (excluding expressways and airport roads), as well as all elevated roads and expressways within the Ring Expressway (including ramps and affiliated bridges and tunnels).
Was this review help?
5
4
Share
More Forum Discussions

Where to Find the Vehicle Identification Number (VIN)?

The Vehicle Identification Number (VIN) is generally located at the lower left corner of the front windshield, or on the driver's side door hinge pillar, door lock pillar, or door edge, where it is quite visible. In some cases, it may also be found in the engine compartment. If not found in these locations, it might be fixed on the inner side of the door near the driver's seat. The VIN consists of a total of 17 characters, which can be divided into three parts: the first part is the World Manufacturer Identifier (WMI), comprising the 1st to 3rd characters; the second part is the Vehicle Descriptor Section (VDS), comprising the 4th to 9th characters; and the third part is the Vehicle Identifier Section (VIS), comprising the 10th to 17th characters. The VIN is the unique identification information of a vehicle, equivalent to the vehicle's ID card.
5
3
Share

Where is the USB port of the Toyota Allion located?

USB port is located next to the central control screen of the Toyota Allion. Functions of USB port: Insert USB drive to play music. Charge mobile phones. USB car cigarette lighter. Car vacuum cleaner. Electronic dog, dash cam. Adapted current: The car's USB port provides both 5V/2.1A and 5V/0.5A currents. Many mobile phones require an input current of 5V/1A. The 5V/2.1A car USB port can certainly meet this requirement, supplying 1A current to mobile phones and 2A current to tablets. If it's 5V/0.5A, it's obvious that the current will be insufficient. Charging mobile phones under this condition will not only take longer time but also cause the phone to heat up.
14
5
Share

Is Patching a Run-Flat Tire the Same as Patching a Regular Tire?

Patching a run-flat tire is not the same as patching a regular tire. Self-sealing tires: Regular tires have sealant attached to the inner side. Simply remove the puncturing object, inflate the tire fully, and the sealant will fill the puncture from the inside out without needing disassembly, achieving self-repair. The drawback is that it may not self-seal larger punctures or leaks, and if self-sealing fails, the presence of liquid inside the tire prevents conventional patching methods, requiring a new tire instead. Run-flat tires: These are regular tires with ultra-thick sidewalls. In case of a leak, the sidewalls do not collapse and maintain their shape, allowing short-distance driving to a tire shop for conventional repairs. The downside is that the tires are too stiff, resulting in poor ride comfort.
3
4
Share

What to Do When the Air Conditioning Suddenly Loses Cooling While Driving?

The methods to handle sudden loss of cooling in the air conditioning while driving are: 1. Check if there is a lack of refrigerant; 2. Check if the compressor is working; 3. Check if the evaporator is dirty or blocked; 4. Check if the electric fan is operating normally; 5. Check if the temperature sensor is functioning properly; 6. Check if the air conditioning switch is working correctly. The reasons for the air conditioning not cooling are: 1. Too much dust on the condenser; 2. Damaged or malfunctioning compressor capacitor; 3. Leakage of air conditioning refrigerant; 4. The car's air conditioning belt is too loose; 5. Moisture has entered the refrigeration system. Precautions for using the air conditioning are: 1. Turn off the air conditioning during startup and sudden acceleration; 2. Do not set the air conditioning temperature too low; 3. Control the direction of the air vents; 4. Do not turn on the air conditioning immediately after exposure to the sun; 5. Turn off the air conditioning before shutting off the engine.
4
4
Share

What Causes High Fuel Consumption in Toyota Vehicles?

Toyota vehicles may experience high fuel consumption due to carbon buildup, battery issues, or insufficient coolant. Carbon Buildup: Increased fuel consumption is the most direct indicator of carbon buildup. Carbon deposits can affect combustion efficiency. Therefore, it's important to avoid driving habits that lead to excessive carbon accumulation during regular use, while also monitoring carbon buildup and promptly cleaning or replacing affected components. Battery-Related Fuel Increase: The battery powers all electrical components in the vehicle. As is well known, automotive electrical energy comes from conversion - unless it's a new energy vehicle, electricity isn't directly charged in. If the battery malfunctions, more fuel will be required to generate the necessary electricity for normal operation of electrical components. Battery damage can cause far more harm than this, making regular inspections essential. Insufficient Coolant: Coolant maintains proper engine operating temperature. Insufficient coolant will cause the engine to exceed normal working temperatures, significantly increasing fuel consumption. Additionally, other components may be damaged when coolant levels are low. Vehicle owners must monitor coolant levels and replenish them promptly.
5
2
Share

What Causes the Failure of Volkswagen Throttle Control Function?

Volkswagen throttle control function failure is caused by a malfunction in the electronic throttle, which triggers the computer's fail-safe mode. In this state, the engine is no longer under the driver's control and operates at a predetermined speed based on the computer's memory. The electronic throttle is a critical control component of a car's engine. The electronic throttle control system ensures precise throttle opening control, improving fuel economy, reducing emissions, and delivering rapid system response for satisfactory driving performance. Additionally, it enables the integration of idle speed control, cruise control, and vehicle stability control, simplifying the control system structure. Common causes of electronic throttle failure include damaged position sensors, poor contact, open circuits, or short circuits in the throttle position sensor wiring, incorrect initialization position, leading to poor engine acceleration and weak vehicle performance. In automatic transmission vehicles, this may result in delayed gear shifts and harsh shifting. Excessive carbon buildup in the throttle, damage to the throttle servo motor, or poor contact, open circuits, or short circuits in the throttle servo motor wiring can cause symptoms such as engine idle shaking, unstable idle speed, stalling at low speeds, and poor throttle response. If the engine control unit malfunctions, the engine warning light will illuminate. All these issues require professional inspection and repair at a service center.
20
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.