What are the toll-free periods on highways?

3 Answers
AxelLee
07/29/25 3:03pm
Highway toll-free periods: During four major holidays each year—Spring Festival, Qingming Festival, Labor Day, and National Day—passenger vehicles with seven seats or fewer (including seven seats) can travel on highways for free. The free period starts at 00:00 on the first day of the holiday and ends at 24:00 on the last day of the holiday (for ordinary roads, the toll is based on the time the vehicle passes through the toll lane of the toll station, while for highways, it is based on the time the vehicle exits the toll lane at the highway exit). Below are the specific time periods: 1. Spring Festival: 7 days from 00:00 on January 27 to 24:00 on February 2. 2. Qingming Festival: 3 days from 00:00 on April 2 to 24:00 on April 4. 3. Labor Day: 3 days from 00:00 on April 29 to 24:00 on May 1. 4. National Day: 7 days from 00:00 on October 1 to 24:00 on October 7.
Was this review help?
13
0
Share
MacTanner
08/13/25 7:42am
The toll-free period on highways is usually during national statutory holidays, such as major occasions like the Spring Festival, Qingming Festival, Labor Day, and National Day. I've been driving long distances for many years, and traveling during these free periods can save a lot on toll fees. According to regulations, the free period typically starts at midnight on the eve of the holiday and lasts until a day or two after the holiday. Take last year's National Day as an example, it was toll-free for several days. However, I'd like to remind everyone that highways can be extremely congested during peak hours, especially on some popular routes. It's best to plan your trip in advance and avoid the peak travel times for departure and return. Additionally, check the weather forecast and traffic announcements before setting off, as bad weather or unexpected incidents can sometimes affect the implementation of the toll-free policy. Safe driving is key—don't neglect rest just to save money or rush your journey.
Was this review help?
12
4
Share
Expand All
GiannaAnn
10/11/25 6:14am
Highway toll exemptions are mainly concentrated during several major holidays, such as the Spring Festival, Qingming Festival, Labor Day, and National Day. I love taking my family out during these periods as it saves a lot of money that can be used for travel or refueling. The free period usually lasts around two to three days, with specific dates depending on the year's announcement. However, be cautious—traffic during the toll-free period is heavy, and congestion is common, especially near city exits or scenic spots. I recommend departing a day or two early to avoid rush hour peaks. Additionally, pack enough water and snacks to prevent hunger during traffic jams. Highway service areas also get crowded, so plan refueling stops in advance. Take advantage of these free opportunities to organize family activities that are both budget-friendly and enjoyable.
Was this review help?
6
3
Share
Expand All
More Forum Discussions

How to reset the oil change reminder on the Civic dashboard?

Civic dashboard oil change reminder reset steps are as follows: 1. First, do not start the car, locate the setup button below the dashboard. 2. Find the maintenance light reset button on the right side of the dashboard, then start the Civic while continuing to hold the button for about ten seconds until the maintenance interval indicator enters reset mode. 3. Release the reset button and press button A within 20 seconds. 4. Additional information: The "SERVICE" display is the maintenance interval indicator. When the ignition switch is in the "ON" position, the "SERVICE" display will flash. If the indicator disappears after starting the engine, it means the vehicle requires maintenance.
16
4
Share

What are the reasons for unstable CarPlay connection in the Mazda3 Axela?

There are many reasons for unstable CarPlay connection in the Mazda3 Axela. Data cable connection issues: This is a common problem for many car owners. Over time, the data transmission function of the cable may fail, causing it to only charge but not transfer data. In this case, you need to purchase a new data cable, preferably an original one or an MFI-certified cable. Alternatively, you can use a one-male-to-two-female data cable to connect your phone. USB port issues: Frequent plugging and unplugging of the data cable can lead to a loose USB port, poor contact, or even damage. Check if these are the causes. If not, also verify if the USB port's current is too low. Insufficient current can cause intermittent disconnections, where re-plugging the cable temporarily restores the connection. If this is the issue, you may need to increase the USB port's current or use a one-male-to-two-female data cable with one end connected to a power bank. Outdated iOS version on the phone: First, check if the phone's operating system is outdated. An older version may cause unstable connections, so updating to the latest version is recommended. Additionally, if the phone hasn't been restarted for a long time, this could also lead to connection issues. Regularly restarting the phone can help maintain stable CarPlay functionality. Insufficient phone memory: If the phone's memory is low, the CarPlay function may experience lag or disconnections when processing larger data. Clearing the phone's memory and ensuring sufficient space is available can help the CarPlay function run smoothly. Also, make sure all relevant permissions for CarPlay are enabled on the phone to ensure a stable connection.
6
4
Share

What is the throttle reset method for Camry?

Camry throttle reset method is as follows;1. First, turn the key to the power supply position, but do not start the vehicle engine, that is, in the off state. 2. Then, after standing for about 10 seconds, quickly press the accelerator pedal to the bottom, be sure to press it quickly to the bottom, hold for 15 seconds, and then quickly release the pedal. 3. After that, turn off the key door, pull out the key, and stand for about 15 seconds. 4. Finally, start the vehicle normally, and the reset is complete. Extended information: The electronic throttle has a self-adjustment function, and reset is generally required after cleaning or replacement. The function of the throttle is to specifically input air into the engine and discharge the exhaust gas after combustion.
14
2
Share

How tall is the BMW X3?

The BMW X3 has a body length of 4717MM, a width of 1891MM, a height of 1689MM, and a wheelbase of 28654MM, with improved dimensions compared to the previous model. The new BMW X3 features more extended side body lines than the current model, with a waistline that runs from the front fender to the taillights. Here is some related information about the BMW X3: 1. Powertrain: It is equipped with a 2.0T-L4 engine, featuring turbocharged intake, with a maximum horsepower of 184ps and a maximum torque of 290nm. 2. Configuration: The BMW X3 is a front-engine, four-wheel-drive vehicle. It has a double-joint shock absorber front suspension and a multi-link independent rear suspension. The steering assistance type is electric power, and the body structure is of a load-bearing type.
18
4
Share

What is the maintenance interval for the Buick LaCrosse?

Buick LaCrosse maintenance interval is 5,000 kilometers. The following is an introduction to car maintenance: 1. The purpose of car maintenance is to keep the vehicle clean, maintain normal technical conditions, eliminate potential hazards, prevent failures, slow down the deterioration process, and extend the service life. 2. Car maintenance mainly includes the engine system (engine), transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. 3. Minor maintenance generally refers to the regular maintenance items performed at the manufacturer's specified time or mileage to ensure vehicle performance after the car has traveled a certain distance. It mainly includes changing the engine oil and oil filter.
5
0
Share

How to reset the maintenance wrench on the Besturn X80?

Besturn X80 maintenance wrench reset steps are as follows: 1. Turn the ignition switch to the "OFF" position, and hold down the "OK" button on the dashboard without releasing it. 2. Turn the ignition switch to the "ON" position, keep pressing the "OK" button for more than 10 seconds; after releasing the "OK" button, the maintenance light will reset. Below is an introduction about car maintenance: 1. Major maintenance refers to the routine maintenance performed at the time or mileage specified by the manufacturer, including replacing the engine oil, oil filter, air filter, gasoline filter, etc. 2. Minor maintenance mainly includes replacing the engine oil and oil filter.
9
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.